FULL CAR PACK NOW LIVE! - https://www.cgtrader.com/3d-model-packs/kyosho-lazer-zxr-zxrr-full-car-pack-with-some-mod-parts
4 Arm brackets are stock parts and ive added some slightly modded ones for different rear toe angles. You will have to drill out the arm holes with a 3mm drill bit or 3.1 if you have it depending on how tight you want them to fit. There are 32.7mm and 33.7mm front arm block for the rear of the car and 35mm, 36mm & 37mm rear arm block for the rear of the car. This should give you some adjustment over the rear toe in. Certain places on these have a light angle to them so you will have to try a few different angles to print them at. I like to print everything raised off the bed personally but try it both ways and see what works best for you. I will upload a video to YouTube very soon explaining some of the Lazer files i have made and i will link it here when done. - https://youtu.be/A3WvQG3Msh0?si=Ly0Qf-x2fp1rYVGSI - If you are into your Lazers like me look up Rubrix Racing on google, they have started producing some fantastic Lazer parts as of April 2026. If i was looking for parts, that would be helpful information for me so i leave it here for you. Give them a search!