FULL CAR PACK NOW LIVE! - https://www.cgtrader.com/3d-model-packs/kyosho-lazer-zxr-zxrr-full-car-pack-with-some-mod-parts
This includes the upper deck mount parts and the rear shock tower mount for the Lazer ZX/ZXR. Try printing a few different ways to find the best angle for look vs strength. Heat the screws before inserting self tappers, the rear deck mount has three 3.5mm holes which need to be tapped with an M4 tap. The pass through holes in the rear wishbone mount need to be drilled out with a 3mm drill bit. The rear wishbone mount is best printed on its side ive found, use plenty of support and heat the screws in the holes that use self tappers. I have so far printed these in Polycarbonate and ASA, both worked very well. Ill upload a video to my YouTube channel soon to explain some of my Lazer files and will link it here - https://youtu.be/A3WvQG3Msh0?si=Ly0Qf-x2fp1rYVGSI - If you are looking for Lazer parts and are a fan like me Rubrix Racing in the US have started producing parts in fantastic quality as of April 2026, go and search them up on google, you wont be dissapointed!