FULL CAR PACK NOW LIVE! - https://www.cgtrader.com/3d-model-packs/kyosho-lazer-zxr-zxrr-full-car-pack-with-some-mod-parts
Kyosho Lazer ZX & ZXR knuckle arms (OT16), youll have to try a few different angles to print these as theyre fairly shapeley and require support and raising off the bed. They are easy to print in ASA but may require a little work to remove support material so the bearings will fit properly, I used a dremel. Use a 2.5mm drill bit to drill out the holes and a 3mm tap to tap them. The hole for the steering arm should be drilled to 2.5mm and the screw heated with boiling water or similar before it is screwed in to prevent cracking. I will soon upload a YouTube video here explaining some of these Lazer files I have made and link it here. - https://youtu.be/A3WvQG3Msh0?si=Ly0Qf-x2fp1rYVGSI - If you are a Lazer enthusiast like me you might be interested in Rubrix Racing products, as of April 2026 they have started producing excellent parts for these cars so their website is well worth a look.