FULL CAR PACK NOW LIVE! - https://www.cgtrader.com/3d-model-packs/kyosho-lazer-zxr-zxrr-full-car-pack-with-some-mod-parts
Front and rear wishbones for the classic Kyosho Lazer ZX and ZXR, direct fit. These are about as accurate as you can get to the original factory part. I have also added a modified one with a hole for an anti roll bar and strengthened it accordingly. I have printed these in Polycarbonate and ASA, both of which worked really well. The ASA looks a little more proffessional because its not as shiny and it may be better for RC use as it has better impact resistance. I printed these flat, raised of the bed by 3mm and as shown in the photos standing up on their end both worked without issues. Drill out the holes for the connecting pins either end of each wishbone with a 3mm drill bit and run it in and out a couple of times, it shouldnt be so tight you have to force the pin through. I would run an M3 tap in the holes for the shock mounting. Many hours of creation have gone into these parts, it took a year to CAD design the whole car in my spare time. Hopefully these parts will be of use to somebody, as you can see from the photos it is totally possible to 3D print and CNC cut 90% of the car. I have uploaded a video to YouTube explaining some of the files - https://youtu.be/A3WvQG3Msh0?si=Ly0Qf-x2fp1rYVGSI - For those who are interested visit Rubrix Racing for some spectacular parts, as of April 2026 they have started manufacturing classic Lazer parts that are over and above levels of quality and are tested in racing in UK and USA. I have been closely following their manufacturing and for enthusiasts of this car they really are worth a look.