FULL CAR PACK NOW LIVE! - https://www.cgtrader.com/3d-model-packs/kyosho-lazer-zxr-zxrr-full-car-pack-with-some-mod-parts
Kyosho Lazer ZX and ZXR front hub carrier, works for both sides. LA27 is the original kit part, i think LA59 was on the ZXRR and was an option part. I never had this part so ive just done my own creation based off of photos online. I have also created an LA59 with bearing recess top and bottom which takes a MR84ZZ bearing (4mm ID, 8mm OD, 3mm width). I have so far printed these in PETG-CF, ASA and Polycarbonate. All seemed to work well, PETG-CF was possibly a little weak though. I printed them on their back with the oblong opening on the plate once or twice and the best results I had were printing them on one side raised off the bed 3mm with support. Run a 3mm drill bit through the suspension shaft holes and a 4mm drill bit through the top and bottom holes. I will shortly upload a youtube video explaining some of these files and will put the link here. - https://youtu.be/A3WvQG3Msh0?si=Ly0Qf-x2fp1rYVGSI - For other Kyosho Lazer ZX/ZXR enthusiasts, Rubrix Racing have recently started making parts for these cars and they are fantastic quality. They started to show these online in April 2026 so their website is well worth a look.