C
christian-piasini christian-piasini
Will test on dyno and report later the dyno results
I will try to print in both ways, one piece and two pieces with glue
thanks
CP
Useto navigate. Pressescto quit
Yamaha MT-07 Air Filter cover STAGE 2 3D print model
Description
Yamaha MT-07 / FZ-07 Air filter cover Stage 2.
This is a complete replacement airfilter cover designed for performance on race track only...
A similar item in store cost a wooping 70 to 90€. With this you'll be able to print it for you and your buddy for a fraction of the price (raw cost estimated at less than 2$ for a complete cover)...
This part have been personally tested on more than +25000km (ongoing) in every weather, all year long. I do know that this part have been correctly made (accuracy/dimensions) and fully tested.
You can find a installation guide here: https://www.youtube.com/watch?v=Hxp2N3tkqTE
LEGAL NOTICE: I cannot be held responsible for any damage/injury it may cause to you, your bike or any other person and/or material or anything of any sort. This should be used only on closed private road. No warranty of any sort is provided with the files.
PRINTING RECOMMENDATIONS:
- Use heat resistant filament such as Colorfabb HT or HD-PLA.
- Layer 0.2mm
- Infill at 15-20% or more.
- Best printed in 2 parts (provided) then epoxy/glue them.
Yamaha MT-07 Air Filter cover STAGE 2
Editorial No Ai License
Yamaha MT-07 Air Filter cover STAGE 2
Editorial No Ai License
3D Model formats
Format limitations
- Stereolithography (.stl) (3 files)3.37 MB
- Other 689 KB
3D Model details
- Publish date2017-08-14
- Model ID#763636
- Ready for 3D Printing
Similar Models
to Yamaha MT-07 Air Filter cover STAGE 2
