Tomb Raider Lara Croft Match USP Prop Set 3D print model

Here's a great file that will let you print a pair of Tomb Raider pistols from the Angelina Jolie film. The files for the 928 and 929 are almost identical, the only real differences is that the display is reversed, and the serial numbers on the slides of the prop. We based them on the original prop's serial numbers, so one of them ends in 928 and one of them ends in 929. Other than that, they're identical.

If you want to make the magazines removable, use 2 5mmx2mm magnets on each prop. And if you want the triggers to work, you'll need a small spring.

You'll need some super glue to put it all together. I didn't use any paint on the pistols, but I did use gold and gray paint for the stands.

Assembly:

1- Glue the base on the magazine, and glue the barrel into the front of the slide. Then glue2- Glue the spring into the trigger then insert the trigger and put the pin through to hold it in place. You don't need to glue the pin into place.3- Glue the compensator parts to the front of the lower section.4- That's what it will look like complete.5- Glue the magnets into the lower section and magazine.6- Glue the upper slide to the lower section.7- Paint up the display stand, and you're all set! You can also paint the word Match on the compensators white.8- This shows the different serial numbers.9- Detail of the display stand.

Printed on a Bambu A1 with black matte PLA and silver silk PLA with tree supports and an outer brim.