Here's another iconic prop! Snake Plissken's Mac 10. This is a simple print file that needs minimum clean up to get yourself a great cosplay or display prop.

I printed this on a Bambu A1 (256x256x256) in matte black PLA.

You'll need 2 small springs and a small metal bar to complete it if you want the trigger to work and the magazine to eject. Otherwise you can just build it static.

To assemble it, you'll need some super glue.

Assembly:

1- Disregard. The magazine is now one piece so you can skip this step.2- Glue the safety switch in place.3- Glue the front sight into place.4- Glue the front to the main body.5- Use some filament to connect the scope together.6- Attach the barrel to the silencer.7- Glue the springs to the trigger and mag release.8- Use a pin (I used the shaft from a pop rivet) to pin the mag release in place. Do not use glue.9- Glue the trigger guard in place and install the trigger at the same time.10- Install the plug into the body without glue, then glue the selector switch to the plug. If done correctly, the switch will rotate.11- Glue the charging handle in place. Forward is safe, to the back is an open bolt which is ready to fire.12- Put the pin in place to hold the trigger. Do not use glue.13- Glue the small bump behind the grip.14- Glue the mag well in place.15- Glue the grip to the back of the mag well.16- Glue the pins in place on the silencer and then glue the 2 parts of the scope mount in place.17- Glue the front to the silencer.18- Glue the scope in place.

For the base, Paint the eagle and the tracker part gold with a red button in the center. I painted the movie poster silver. Once it dried, I sprayed black over it and quickly wiped it off.

Printed on a Bambu A1 with matte black PLA, tree supports, and outer brims.