Here's the cool pistol from Blade 2 with the flashlight and laser unit on the front.

You can swap out the printed flashlight and laser for real ones if you want.

To build it you'll need a small spring for the trigger and 2 5mmx2mm magnets for the magazine so it's removable.

The differences between the Hero and Live Fire versions are:

Hero has the wider magazine slot and the magazine that has a detailed bottom to it. The Live Fire version has a smooth bottom to the magazine.The Hero version has a 2 part LAM unit that is solid on the sides. The Live Fire version has a 1 part LAM with open slots on the top part.The Hero has an open port on top of the compensator and has an exposed barrel. The Live Fire has a closed compensator.The Hero has an adjustable rear sight. The Live Fire has a simplified one.

Assembly:

1- Glue the spring into the trigger and then insert it into the space.2- Insert the bar.3- Glue the magnets into the magazine and magazine well.4- Glue the base plate onto the bottom of the magazine.5- Glue the compensator to the lower.6- Glue the other side of the compensator. Glue the barrel in place. Glue the reat sight in place.7- Glue the front face of the LAM in place and insert the laser. You can glue the laser and flashlight, or use some bits of foam to keel them from moving around. Be sure to use the other holder to support the flashlight and laser in the back.8- Attach the flashlight and glue the slide to the lower section.9- Glue the LAM unit in place and glue the top to the bottom.10- Paint the slots black.11- Glue on the front sight.

Printed on a Bambu A1 in black matte PLA and silver silk PLA, with tree supports and an outer brim.