Blade 2 Live Fire USP Match Prop w LAM - Wesley Snipes 3D print model

Here's the cool pistol from Blade 2 with the flashlight and laser unit on the front.

You can swap out the printed flashlight and laser for real ones if you want.

To build it you'll need a small spring for the trigger and 2 5mmx2mm magnets for the magazine so it's removable.

The differences between the Hero and Live Fire versions are:

Hero has the wider magazine slot and the magazine that has a detailed bottom to it. The Live Fire version has a smooth bottom to the magazine.The Hero version has a 2 part LAM unit that is solid on the sides. The Live Fire version has a 1 part LAM with open slots on the top part.The Hero has an open port on top of the compensator and has an exposed barrel. The Live Fire has a closed compensator.The Hero has an adjustable rear sight. The Live Fire has a simplified one.

Assembly:

1- Glue the spring into the trigger and then insert it into the space.2- Insert the bar.3- Glue the magnets into the magazine and magazine well.4- Not needed for the Live Fire version.5- Glue the compensator to the lower.6- Glue the other side of the compensator. Glue the rear sight in place.7- Glue the front face of the LAM in place and insert the laser. You can glue the laser and flashlight, or use some bits of foam to keep them from moving around. Be sure to use the other holder to support the flashlight and laser in the back.8- Attach the flashlight and glue the slide to the lower section.9- Glue the LAM unit in place.10- Not needed for the Live Fire Version.11- Not needed for the Live Fire Version.

Printed on a Bambu A1 in black matte PLA and silver silk PLA with tree supports and an outer brim.