Snow Brick Mold | Igloo & Sandcastle Builder

Become the architect of the ultimate snow fort with this Snow Brick Mold. Designed to pack snow (or sand) into perfect, uniform rectangular blocks, this tool allows you to construct sturdy igloos, walls, and castles with speed and precision.

The mold features a slight draft angle and smooth internal geometry to ensure the bricks slide out easily without breaking. Whether you are at the ski lodge or the beach, this is an essential tool for outdoor fun.

Scaling & Customization Guide:This model is designed to be fully scalable. The default size is optimized for standard printers, but you should adjust it in your slicer to fit your specific building needs:

• Scale Up (120% - 150%): For building large forts and igloos quickly (Check your max print volume).
• Scale Down (50% - 75%): Perfect for detailed sandcastles or smaller hands.

Printing Settings

• Orientation: Print flat on the bottom base (open side facing up).
• Layer Height: 0.2 mm or 0.28 mm (Thicker layers are faster and make the part stronger).
• Wall Line Count: 3 to 4 (Essential! This tool will be banged against snow and ground, so it needs thick walls).
• Infill: 15% - 20% (Grid or Gyroid).
• Supports: None Required.
• Material: PETG, ASA, or ABS are recommended for freezing temperatures and high impact. PLA is fine for sand/beach use.