Patreon ExclusiveFor commercial use and Custom Orders, join our Patreon here: [https://www.patreon.com/thegulzar3d](https://www.patreon.com/thegulzar3d)
Interlocking Snow Brick Mold | Igloo & Sandcastle Builder️ Build walls that stay standing.
Upgrade your winter architecture with this Interlocking Snow Brick Mold. Unlike standard smooth molds, this tool creates blocks with a geometric, keyed surface. When stacked, the bricks lock into the layer below, providing superior structural stability for taller igloos and sturdier forts.
The design also solves the biggest frustration of snow molds: sticking. It features two ergonomic Thumb-Release Holes on top. Simply insert your thumbs and push to eject the compacted brick instantly—no more banging the mold against the ground!
Design Features
- Interlocking Geometry: The ribbed pattern creates friction and alignment keys, keeping your walls straight and preventing slips.
- Thumb-Release System: Two large holes allow you to push the snow block out from the back, ensuring a perfect release every time.
- Heavy Duty: Thick walls and reinforced ridges allow you to pack the snow densely without the plastic bowing.
File Types Included
- STL: Universal file.
- Bambu Studio .3mf: Pre-configured project for Bambu Lab.
- Creality Print .3mf: Pre-configured project for Creality.
How to Use
- Fill the mold with snow and pack it down firmly.
- Scrape the top level.
- Flip the mold onto your wall.
- Press your thumbs through the top holes to push the brick out.
️
Printing Settings
- Layer Height: 0.2mm - 0.28mm (Thicker layers = faster print & stronger part).
- Wall Loops: 3 to 4 loops (Crucial for withstanding the pressure of packing snow).
- Infill: 15% - 20% (Gyroid).
- Support: None Required.
- Orientation: Print with the large opening facing UP (flat face on the build plate).
- Material: PETG, ASA, or PLA+. (Standard PLA can become brittle in sub-zero temps; PETG is recommended for durability).
