Patreon ExclusiveFor commercial use and Custom Orders, join our Patreon here: [https://www.patreon.com/thegulzar3d](https://www.patreon.com/thegulzar3d)
Bone-Shaped Snow Brick Mold | Igloo & Sandcastle BuilderBuild stronger snow walls with paving-stone geometry.
Take your snow construction to the next level with this Bone-Shaped Snow Brick Mold. Unlike standard rectangular blocks, this I-shape or bone design allows the bricks to interlock naturally when stacked, providing superior lateral stability for your igloos and snow forts.
Designed for frustration-free play, this mold features two ergonomic Thumb-Release Holes on the top. If the snow gets stuck, simply insert your thumbs and push the block out for a perfect release every time.
Design Features
- Interlocking Shape: The Dog Bone or Paver geometry locks bricks together, preventing walls from toppling over easily.
- Thumb-Release System: Two perfectly positioned holes allow you to push the snow block out from the back—no more banging the mold against the ground!
- Reinforced Rim: A thick lip around the edge ensures the mold keeps its shape while packing dense snow.
File Types Included
- STL: Universal file.
- Bambu Studio .3mf: Pre-configured project for Bambu Lab.
- Creality Print .3mf: Pre-configured project for Creality.
How to Use
- Fill the mold with snow and pack it down firmly.
- Scrape the top level flat.
- Flip the mold onto your wall.
- Press your thumbs through the top holes to eject the brick.
Printing Settings
- Layer Height: 0.2mm - 0.28mm (Thicker layers = faster print & stronger part).
- Wall Loops: 3 to 4 loops (Crucial for withstanding the pressure of packing snow).
- Infill: 15% - 20% (Gyroid).
- Support: None Required.
- Orientation: Print with the large opening facing UP (flat face on the build plate).
- Material: PETG, ASA, or PLA+. (Standard PLA can become brittle in sub-zero temps; PETG is recommended for durability).
