For commercial use and Custom Orders, join our Patreon here: [https://www.patreon.com/thegulzar3d](https://www.patreon.com/thegulzar3d)

Turn your backyard into a giant building block set.

Why build a regular wall when you can build with giant blocks? This Building Block Snow Mold Set brings the fun of classic interlocking bricks to your snow forts and igloos.

Designed to mimic the iconic LEGO geometry, these molds create snow bricks with large studs on top and corresponding recesses on the bottom. This allows the snow bricks to truly snap and lock together, enabling you to build taller, straighter, and stronger walls than ever before.

• 1-Stud Block: The single stud unit for corners and pillars.
• 2-Stud Block: A half-size brick for corners and detailing.
• 4-Stud Block: The standard square brick for mass wall construction.

• Interlocking Studs: The studs act as anchors, preventing layers from sliding off one another.
• Thumb-Release System: Features holes in the stud cavities. Simply insert your thumbs and push to eject the packed snow block instantly—no sticking!
• Reinforced Walls: Thick walls ensure the mold withstands the pressure of packing dense snow.

• STL: Universal files for any slicer.
• Bambu Studio .3mf: Pre-configured project for Bambu Lab printers.
• Creality Print .3mf: Pre-configured project for Creality printers.

1. Fill the mold with snow and pack it tight (especially into the stud corners).
2. Level off the top.
3. Flip it onto your wall.
4. Push through the holes to release your perfect building block.

• Layer Height: 0.2mm.
• Wall Loops: 3 to 4 loops (Essential for durability).
• Infill: 15% (Gyroid).
• Support: Required.
  • Reason: The internal geometry for the studs and the thumb holes requires support to print cleanly.
  • Recommendation: Use Tree/Organic Supports (Touching Buildplate) for easiest removal.
• Orientation: Print with the large opening facing UP (the face with the studs on the build plate).
• Material: PETG, ASA, or PLA+ (Recommended for cold weather resilience).