For commercial use and Custom Orders, join our Patreon here: [https://www.patreon.com/thegulzar3d](https://www.patreon.com/thegulzar3d)

Build the ultimate winter fortress.

Turn a snowy day into an architectural adventure with this Geometric Snow Brick Mold. Designed for speed and durability, this simple yet effective tool allows you to mass-produce perfectly rectangular snow blocks.

Whether you are building a classic igloo, a defensive fort wall, or a snow castle, these bricks stack uniformly for a sturdy structure. It also works perfectly as a sand brick maker for beach days!

• Ribbed Texture: The internal and external pattern isn't just for looks—it creates keys in the snow that help stacked bricks grip each other, preventing your wall from sliding.
• Air Release Holes: Features holes on the top surface to prevent suction, ensuring the snow brick slides out smoothly every time.
• Reinforced Walls: The geometric ridges add structural stiffness to the plastic, allowing you to pack the snow hard without the mold bowing or cracking.

1. Pack the mold tightly with fresh snow.
2. Scrape off the excess from the top to make it flat.
3. Flip it over and gently lift the mold using the finger grips.
4. Stack and build!

• Layer Height: 0.2mm - 0.28mm (Thicker layers create a stronger part and faster print).
• Wall Loops: 3 to 4 loops (Essential for impact resistance when packing snow).
• Infill: 15% (Gyroid).
• Support: None Required.
• Orientation: Print with the large opening facing UP (flat bottom on the build plate) for the best results.
• Material: PETG, ASA, or PLA+. (Standard PLA can become brittle in freezing temperatures; PETG is highly recommended for winter durability).