DELOREAN HQ Special 3Dprint design 1-8 Scale 530mm 3D print model
Here is my new Delorean specially designed for 3D printing. On a scale of 1/8 as the EagleMoss version. Unique in the world with so many details exclusively for 3D printing. Exceptional quality I worked for months to collect accurate photo of the true Delorean of the film Back to the future part 1 The scene of the beginning of the film on the parking of TWIN PINES MALL exactly. All the details are modeled with extreme rigor. over 500 original pieces mounted or glued. I worked hard to make a very complete and accurate assembly manual with more than 280 illustrations of montage explanation illustrations on a 44-sheet pdf. It is described in the installation instructions how the LEDs are installed and the arduino code is included. Look at the pictures and the video of mine, with time you too would have the same! The few impossible parts printed (windows, cables, LEDs, screws) are described and easy to obtain. Cutting plan for non-printable elements are provided. Many pictures of the real printed pieces are also included.
Attention: a good knowledge of 3D printing is required some pieces are difficult to print for a beginner.
A printer with minimum bed size 210mmX200mm and hight 200mm is requir cause content 3 bigs pieces (if you have only 200x200x200mm print volume, it's possible to split the 3 bigs pieces.)
NEED TO BE PRINT WITH 0.15mm /LAYER recomended !
Paint : Spray Sylver,TAMIYA clear (orange,red,green,yellow), Tamiya XF82(interior),black mat.
need: 1.5kg PLA (grey) , ~100gr PLA clear(PolySmooth Polymaker is the best) Sanding all pieces before painting. reducing the size of parts can cause disappearance of fine detail,I advise against.
If you are having trouble with your slicer use SLIC3rPE (free) all object was tested on it.
I am available for any questions.
NOW!! A Group Delorean Did3D 3D print FACEBOOK is OPEN here: