BUILD-0007 Locomotive Shed 1-port German style H0-scale 3D print model

Ready-to-print super detailed 3D-model set including all neccesary items to build a Locomotive shed, 1-port, in German style H0-scale.

• LENGTH ADAPTABLE: The modular construction makes it possible to build your shed to any desired length, from 150mm up to 600mm.
• SERVO CONTROLLED DOOR OPTION: All parts are included to install servo control of the doors, meaning remotely controlled open and closure of doors.

The locomotive shed has been developed and test printed, built and painted to verify function, detail and printability. Testing has been performed on a range of different consumer grade resin printers. Simply download, un-zip, slice and print. Enjoy! Each part has two stl-files included: One stl-file with support (for resin printers) and one without supports. This way you can customize your print if you like.

PRINTER REQUIREMENTS:

• Minimum 2k LCD or equivalent DLP resolution.
• Minimum print surface: 132 x 80 x 165mm.

We strongly recommend using the following resin for low warp and super detail:

• SIRAYA TECH Grey Fast ABS-like
• Anycubic ABS-like resin

IMPORTANT GENERAL NOTE TO AVIOD WARPING / SCEWING:

• WASHING: Wash all items clean from resin preferrably in a washing mashine 6-8 minutes (Anycubic Wash & Cure 2.0)
• POST CURING: Leave all items to dry after wash properly. Preferrably over-night / 24h. All sides, including inside surfaces, MUST be exposed to the UV-light. Recommended time: 4 minutes.
• Paint the details immidiatly after post-curing using a primer. We recommend TAMAIYA Surface Primer Fine Gray.

*The Editorial licence of course includes unlimited printing for your own Model Railroad. However, the 3D models provided in this set must NOT be used for commersial production or re-sale of the 3D-models.