ROLLS-0014 German State Hopper car Erz IIId H0-scale

ROLLS-0014 German State Hopper car Erz IIId H0-scale 3D print model

Description

*** Requires minimum 3D-printer size: 115 x 70mm*** Includes a full set of STL-files to build a German state railroad 4-axles hopper car for iron ore transport type 00fz 41 Erz IIId in H0-scale. State of model as per 1960s. Model runs well on both 2- and 3-rail systems. The car is equipped with standard sized NEM-pockets, which allows for any NEM-couplings of your choise. In addition you need: 4x wheel pairs (WHEEL DIAM: 10.3mm SHAFT LENGTH: 24.6mm) 2x NEM springs (size 2.0mm diam, 4.0mm length, 0.1 - 0.2mm wire diameter) 2x Couplings for NEM-pocket Ready-to-print super detailed items set for H0-scale Model Railroad. The Print files (STL-format) with correct supports are included and all neccesary preparations are made to simplify print. Simply download, un-zip, slice and print. Enjoy!

The models are developed and test printed to verify function, detail and printability. Testing has been performed on a range of consumer grade 4k, 6k and 8k resin 3D-printers.

We recommend 0.03mm layer thickness. The model has been testprinted successfully using the following resins for low warp, high strength and super detail:

  • 30% Anycubic UV Tough + 70% Anycubic ABS-like resin plus gray

IMPORTANT GENERAL NOTE TO AVIOD WARPING / SCEWING:

  • WASHING: Wash all items clean from resin preferrably in a washing mashine 6-8 minutes (Anycubic Wash & Cure 2.0)
  • POST CURING: Leave all items to dry after wash properly. Preferrably over-night / 24h. All sides, including inside surfaces, MUST be exposed to the UV-light. Recommended time: 4 minutes.
  • Paint the details immidiatly after post-curing using a primer. We recommend TAMAIYA Surface Primer Fine Gray.

*The Editorial licence of course includes unlimited printing for your own Model Railroad. However, the 3D models provided in this set must NOT be used for commersial production or re-sale of the 3D-models.

modelrailroad3d
modelrailroad3d 2024-02-28 13:03:07 UTC
Hi! Thank you for the feedback! Yes, of course 0.03mm is correct. We have now changed the description accordingly. Thank you for helping! Best regards Modelrailroad3d-team
O
omelaurus 2024-02-27 21:18:22 UTC
The text says recommended layer thickness 0.3, but i'm sure this must be 0.03.
Item rating
5 0
S
serasm 2024-04-19 22:36:58 UTC
Recommended
Looks great, I'll convert them to 1-32 and I'm excitet to see how well they will turn out!
R
rdht 2023-12-09 14:18:58 UTC
Recommended
Impressed with the level of detail for the price. Just put it into the slicer, slice and print. No hassle with supports whatsoever as its pre supported. I like the support placement. Easy to remove.
N
n-train 2023-11-15 20:26:17 UTC
Recommended
Very good model, thanks!
ROLLS-0014 German State Hopper car Erz IIId H0-scale
$11.00
 
Editorial No Ai License 
ROLLS-0014 German State Hopper car Erz IIId H0-scale
$11.00
 
Editorial No Ai License 
Response 87% in 11.0h

3D Model formats

Format limitations
  • Stereolithography (.stl)48.2 MB
  • PDF (.pdf)4.22 MB

3D Model details

  • Publish date2023-10-04
  • Model ID#4817233
  • Ready for 3D Printing
Help
Chat