R
rallare 2024-03-05 16:28:49 UTCrallare
Njaaa....Can´t get the base good enough. It´s really bad and don´t know what to do. Tried 2 different anycubic printer, but to no help. It´s the foot on the pillar that does not go well .
Useto navigate. Pressescto quit
PLA-0003 Platform detail set for Europe H0-scale 38 items 3D print model
Description
Ready-to-print super detailed items set for H0-scale Model Railroad. Graphic for the information signs is included. Please see the GRAPHIC.PDF in the package. The Print files (with correct supports, exposure time, lift speed and heights) are included and all neccesary preparations are made to simplify print. Simply download, un-zip, save to USB and print. Enjoy!
The models are developed and test printed on a range of 2k, 4k and 8k consumer grade resin printers to verify function, detail and printability.
We recommend using the following mix of resins for high strength and super detail:
- Mix 30% Anycubic Tough with 70% Anycubic ABS-like plus resin.
IMPORTANT GENERAL NOTE TO AVIOD WARPING / SCEWING:
- WASHING: Wash all items clean from resin preferrably in a washing mashine 6-8 minutes (Anycubic Wash & Cure 2.0)
- POST CURING: Leave all items to dry after wash properly. Preferrably over-night / 24h. All sides, including inside surfaces, MUST be exposed to the UV-light. Recommended time: 4 minutes.
- Paint the details immidiatly after post-curing using a primer. We recommend TAMAIYA Surface Primer Fine Gray.
*The Editorial licence of course includes unlimited printing for your own Model Railroad. However, the 3D models provided in this set must NOT be used for commersial production or re-sale of the 3D-models.
modelrailroad3d
Hi Rallare!
Thank you for using our 3D-models and a BIG thank you for product feedback!
We have now updated the design of the pillar segment with the foot, so it will print better and more easily. New version is 3.
The following items was updated:
Stairs_up_pillar_w_foot_v3.stl
Stairs_up_pillar_w_foot_v3_x1.stl
You will need to download the updated file package from CG Trader to get the redesigned files.
Please use 0.03mm layer thickness for the normal layers and these new files will most likely solve the issue you have seen.
Best regards
Modelrailroad3D-team
R
rallare 2024-03-11 14:23:07 UTCrallare
Fantastic! Thanks! It works perfect! /Peter
K
karlu 2023-08-18 18:36:27 UTCkarlu
Good
C
cpt-millford 2023-08-16 03:25:51 UTCcpt-millford
Great work. Great Design. However with the newest version of the anycubic slicer software photon workshop a window appears when opening the stl files which says file need to be repaired. Do you want to repair file? As well the files that comes with support (the x1 files) are not recognised by the software as files with support and you get asked if you want to add support before slicing.
modelrailroad3d
Hi!
Thank you for contacting us!
It is a known problem in both in the new version of Photon Workshop and Lychee. If you have very fine details, it mistakes these for errors in the model. If you select repair, it can happen that you loose details. There are very few of our models that Lychee doesn't complain about....
Just select that error message should be ignored. Same goes for the "supports missing" error. The new Photon Workshop software works poorly unfortunately.
Best regards
Modelrailroad3D-team
C
cpt-millford 2023-08-16 13:37:03 UTCcpt-millford
I just printed some items form this set without "repairing" them and ignored the missing support error and the result was successful.. I use Anycubic mono 4k with DLP craftsman resin.
J
joan31416 2023-01-12 18:49:20 UTCjoan31416
Todavía no lo he impreso, tengo que reducirlo a escala N.
No se como quedara el detalle.
modelrailroad3d
¡Hola! No es posible imprimir los modelos en escala N. Algunos elementos se imprimirán. Algunos no se imprimirán.
atentamente / grupo Modelrailroad3D
R
rallare rallare
Njaaa....Can´t get the base good enough. It´s really bad and don´t know what to do. Tried 2 different printer, but to no help. It´s the foot that does not go well on the pillar .
W
warwickgfox warwickgfox
Printing was easy
L
labranagan labranagan
An excellent collection of platforms and accessories for resin printing. Ready to use as-is.
Be careful removing the supports from the platform frames.
R
rainerw rainerw
Very handy set. Can use most of these on non-EU layouts as well.
F
firemenfrank112 firemenfrank112
PLA-0003 Platform detail set for Europe H0-scale 38 items
Editorial No Ai License
PLA-0003 Platform detail set for Europe H0-scale 38 items
Editorial No Ai License
3D Model formats
Format limitations
- Stereolithography (.stl)77.3 MB
- PDF (.pdf) (2 files)155 MB
3D Model details
- Publish date2022-07-10
- Model ID#3865860
- Ready for 3D Printing
Similar Models
to PLA-0003 Platform detail set for Europe H0-scale 38 items
