If you have any questions about the model, send me a message by clicking the email icon on the right side of my avatar, I'll get back to you as soon as possible!

Recommend printing from the 3MF files, as most modern slicers support them. STL files do not contain unit information, so their scale can be interpreted differently by the software, especially for very small parts, which may lead to incorrect sizing.

12.28.2024: MRSD_Separated_Windows.3mf / stl - Updated parts with windows separated so you can easily print different colors.

01.16.2024: Mrs-D-V2.step added for anyone who wants to modify it.

01.03.2024: Bathtub and rearplatform updated.

Bathtub.stl - Bathtub has been updated with water block and observation window.

RearPlatform.stl - Teak effect for the rear platform added.

12.30.2023: StepTreads.stl - Step treads for the upper deck has been added.

12.27.2023: Whole model STL files added.

MRS_D_Sliced.STL - V2 version in one file.

MRS_D_V0_Separated.STL - An older design with most color in separated parts.

10.18.2023: V2 has been added with updated fins on the bottom of the ship and lower the battery position.

Note: This is the 3d printable version of the yacht, you can get the render version here:

https://www.cgtrader.com/3d-models/watercraft/recreational-watercraft/next-superyacht-mrs-d

Overview:

• A RC superyacht designed with 3d printing in mind.
• Easy to print and minimize the support material needed.
• All parts connect easily with keys.
• Dimensions: 900mm x 184mm x 274mm

What You Need:

• A 3d printer with build volume at least 250mm x 210mm x 210mm.
• About 3kg of PLA or PETG filament.
• 2 x RC boat driveshaft with universal coupling (250mm x 3mm inner core, 200mm x 8mm outer tube, 30mm propeller).
• 2 x A2212 brushless motor or any motor that’s smaller then 39mm diameter.
• 2 x Bidirectional ESCs.
• 2s or 3s LiPo battery.
• A receiver for your RC controller.
• A RC controller with differential thrust settings.

What’s Included:

• STL files compatible with most of slicer or 3d softwares.
• 3MF files for Bambu Studio, all the printing parameter has been setup.
• Installation instructions video:

https://youtu.be/Dt9MR2oC6qE

• PDF file for user guide:
  

https://drive.google.com/file/d/1eBP3KlRyBQ1fqv3wGRGUg8IVm9f-4cvG/view?usp=sharing

• Related Models:

RC Jet Superyacht:

https://www.cgtrader.com/3d-print-models/hobby-diy/automotive/rc-jet-superyacht

RC Catamaran:

https://www.cgtrader.com/3d-print-models/hobby-diy/automotive/3d-print-rc-catamaran