丁丁历险记 天狼星号拖网渔船。模型参考多本漫画设计，长约90cm， 建议使用550电机和995舵机。轴套直径8mm。照片展示的是我制作的成品，请注意其中的桅杆是用abs管子自制的，栏杆是用铜丝自制的，这些零件打印效果不太好，所以没有提供打印文件。个别细小零件建议树脂打印。甲板可自己贴木皮。包含的零件请以分件图为准，船体分为4段，上层建筑分为2段。祝您玩的愉快！第二个版本，分件都在23.5cm以内。 The Adventures of Tintin, the trawler Sirius Star. The model refers to the design of several comics, is about 90cm long, and it is recommended to use 550 motors and 995 steering gear. Shaft sleeve diameter 8mm. The photos show the finished products I made. Please note that the masts and railings are made by abs pipe and copper wire. The printing effect of these parts is not good, so no printing documents are provided. Resin printing is recommended for individual small parts. The deck can be veneered by itself. Please refer to the section drawing for the included parts. The hull is divided into 4 sections and the superstructure into 2 sections，3D Printers need 25 cm space. Have a good time!