{"listingPage":true,"listingPagePreloaded":true,"params":{"locale":"en","controller":"listing_page","action":"index","parent_category_slug":"rc-boat","file_types":null},"browser_attributes":{"title":"Free \u0026 Premium Rc boat print files","description":"Here you can find Rc boat 3D print files (STL, OBJ, FBX, and many others) ready for printing. Purchase and download free 3D models, stream and print with your 3D printer.","free_to_premium":{"prefix":"Do you need something special? You can find better quality","main":"rc-boat 3D models","postfix":"in the premium listing."},"thumbnails":null,"bottomDescription":false,"pathName":"/3d-models","breadcrumbs":"\u003cdiv class=\"container\"\u003e\u003cul class=\"breadcrumb\" itemtype=\"https://schema.org/BreadcrumbList\" itemscope=\"itemscope\"\u003e\u003cli itemprop=\"itemListElement\" itemscope=\"itemscope\" itemtype=\"http://schema.org/ListItem\" class=\"breadcrumb__item\"\u003e\u003ca itemtype=\"http://schema.org/Thing\" itemprop=\"item\" itemscope=\"itemscope\" title=\"3D Printed Models\" id=\"8bad1aed61d47d6b498a1f6f713ce0be\" href=\"https://www.cgtrader.com/3d-print-models\"\u003e\u003cspan itemprop=\"name\"\u003e3D Printed Models\u003c/span\u003e\u003c/a\u003e\u003cmeta itemprop=\"position\" content=\"1\" /\u003e\u003c/li\u003e\u003cli itemprop=\"itemListElement\" itemscope=\"itemscope\" itemtype=\"http://schema.org/ListItem\" class=\"breadcrumb__item\"\u003e\u003cspan itemtype=\"http://schema.org/Thing\" itemprop=\"item\" itemscope=\"itemscope\"\u003e\u003cspan itemprop=\"name\"\u003eRc Boat  3D print models\u003c/span\u003e\u003c/span\u003e\u003cmeta itemprop=\"position\" content=\"2\" /\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/div\u003e","breadcrumbsType":"Browse by type","rootPath":"/3d-print-models/rc-boat","validBrowserType":[{"tag":"Low-poly Rc-boat","category_url":"/low-poly-3d-models/rc-boat"},{"tag":"Rigged Rc-boat","category_url":"/rigged-3d-models/rc-boat"},{"tag":"Animated Rc-boat","category_url":"/animated-3d-models/rc-boat"},{"tag":"3D printed Rc-boat","category_url":"/3d-print-models/rc-boat"}],"relatedTagsUrlWithoutTag":"https://www.cgtrader.com/3d-print-models","currentProductType":"printable","searchingFree":false,"isTopBannerVisible":true},"tags":[["rc",{"thumbnailUrl":"https://media.cgtrader.com/variants/tTXWrd8zZrdWUhB4UFrQPSFB/bd05887eeff7ef4953f590568f2f2f487a1202a6ecdcd2266fe9306d7941ba97/DDG_151_01.JPG"}],["hobby",{"thumbnailUrl":"https://media.cgtrader.com/variants/SWYwofSH5HqGUMXuEksXWdEY/0614d84bdc59a9966ecae828cdf598d52b24aff775161cff6edd2989d8b52400/000.jpg"}],["diy",{"thumbnailUrl":"https://media.cgtrader.com/variants/bvokyKVncuBk7zWDUUUqkvjr/0614d84bdc59a9966ecae828cdf598d52b24aff775161cff6edd2989d8b52400/inner.jpg"}],["hobby-diy",{"thumbnailUrl":"https://media.cgtrader.com/variants/QpMzXvZHFYNZWCv9YdZPZiiv/0614d84bdc59a9966ecae828cdf598d52b24aff775161cff6edd2989d8b52400/A.jpg"}],["car",{"thumbnailUrl":"https://media.cgtrader.com/variants/hwFLagL55QFLewETNs3gqY7o/0614d84bdc59a9966ecae828cdf598d52b24aff775161cff6edd2989d8b52400/1.485.jpg"}],["boat",{"thumbnailUrl":"https://media.cgtrader.com/variants/tij6fqdL938jVB64yVuVVgT7/32d69f4c24e98012509fbe07e0c3cba3db52c110c584bf0d90d37cc033ef0b38/BoatExample1.png"}],["automotive",{"thumbnailUrl":"https://media.cgtrader.com/variants/SfGYMHwwzMUbeEbnZrrBQ58f/0614d84bdc59a9966ecae828cdf598d52b24aff775161cff6edd2989d8b52400/0.jpg"}],["vehicle",{"thumbnailUrl":"https://media.cgtrader.com/variants/wofWwPJr387S2QEdhdchCuek/0614d84bdc59a9966ecae828cdf598d52b24aff775161cff6edd2989d8b52400/rangerxx5.jpg"}],["ship",{"thumbnailUrl":"https://media.cgtrader.com/variants/hfZmwv3GMMJwXxojN3EGa8Xv/0614d84bdc59a9966ecae828cdf598d52b24aff775161cff6edd2989d8b52400/de-zeven-provincien-1665-3d-model-obj-fbx-c4d-stl.jpg"}],["miniatures",{"thumbnailUrl":"https://media.cgtrader.com/variants/AeDvssb7Sm8PYZjyUELeK27U/32d69f4c24e98012509fbe07e0c3cba3db52c110c584bf0d90d37cc033ef0b38/cyclepng.png"}],["print",{"thumbnailUrl":"https://media.cgtrader.com/variants/pY9kn58onMnmqDYRawCdoVjh/0614d84bdc59a9966ecae828cdf598d52b24aff775161cff6edd2989d8b52400/Moss_Scene_G_Moss_CC.jpg"}],["printable",{"thumbnailUrl":"https://media.cgtrader.com/variants/pY9kn58onMnmqDYRawCdoVjh/0614d84bdc59a9966ecae828cdf598d52b24aff775161cff6edd2989d8b52400/Moss_Scene_G_Moss_CC.jpg"}],["wheel",{"thumbnailUrl":"https://media.cgtrader.com/variants/CVCxgTcd99wD5aYN2rYH1Yv2/32d69f4c24e98012509fbe07e0c3cba3db52c110c584bf0d90d37cc033ef0b38/michelin%201.png"}],["rc-car",{"thumbnailUrl":"https://media.cgtrader.com/variants/QpMzXvZHFYNZWCv9YdZPZiiv/0614d84bdc59a9966ecae828cdf598d52b24aff775161cff6edd2989d8b52400/A.jpg"}],["toy",{"thumbnailUrl":"https://media.cgtrader.com/variants/RLgxxh5EcdpBGHQi3UvCLdsb/32d69f4c24e98012509fbe07e0c3cba3db52c110c584bf0d90d37cc033ef0b38/Toy%20Rocket%20Wide.png"}],["scale",{"thumbnailUrl":"https://media.cgtrader.com/variants/dk9c2nKLPa2QpL7yyXwEpB9o/32d69f4c24e98012509fbe07e0c3cba3db52c110c584bf0d90d37cc033ef0b38/2.png"}]],"seo_tags":[{"key":"Rc Boat","tag":"rc-boat","count":0,"show":true},{"key":"Boat","tag":"boat","count":15959,"show":true},{"key":"Ship","tag":"ship","count":8769,"show":true},{"key":"Sea","tag":"sea","count":8471,"show":true},{"key":"Watercraft","tag":"watercraft","count":8391,"show":true},{"key":"Rc","tag":"rc","count":5587,"show":true},{"key":"Ocean","tag":"ocean","count":5263,"show":true},{"key":"Vehicle","tag":"vehicle","count":5005,"show":true}],"is_mobile_s_s_r":false,"data":[{"id":"6764644","type":"listingItem","attributes":{"id":6764644,"title":"Yellowfin 39 Rc Boat ","price":99.0,"description":"Here you will find the Yellowfin 39 replica model, ready to be 3D printed in separate sections and assembled.\nThe model does not include the engines or the electronic components, which must be installed separately.\nThe construction method involves the use of brass heat-set inserts and screws.\nAdditionally, to make the hull waterproof, it is recommended to use epoxy resin to bond and seal the joints\n\nOverall model dimension: 110 cm x 33 cm (without motors)","imageAlt":"Yellowfin 39 Rc Boat 3D printable model","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/yellowfin-39-rc-boat","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/xvkc2s8v9oprsc96m839zmdq8ixi/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/WhatsApp%20Image%202026-01-18%20at%2016.30.09.jpg","gridUrl":"https://media.cgtrader.com/variants/xvkc2s8v9oprsc96m839zmdq8ixi/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/WhatsApp%20Image%202026-01-18%20at%2016.30.09.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/yellowfin-39-rc-boat","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6764644/983694f97c/yellowfin-39-rc-boat-3d-model-983694f97c.webp","saleOffDiscount":70,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"4823701","type":"listingItem","attributes":{"id":4823701,"title":"Ragnarok - 3D Printable RC Jetsprint Boat","price":0.0,"description":"If your download doesn't work, use google drive: https://drive.google.com/drive/folders/1lukbT7He7mFx0xf2uT2z5JtRkQCCP2En?usp=drive_link\n\n**RAGNAROK HARDWARE KIT** by RCPrinter: https://rcprinter.com/products/m-jet-ragnarok-build-kits\n\nRagnarok is a free 3D printable jetsprint boat hull designed by M-Jet Development working closely with the M-Jet community, who did huge amount of work testing all Ragnarok versions.\n\nRagnarok is 550mm long, resulting in scale of around 1/7,3. \n\nRagnarok is designed for performance when used with the M-Jet 35. When built well, can achieve 60kph, when taken to extreme, 79kph is the current Ragnarok speed record.\n\n**Ragnarok is compatible with M-Jet 30 and M-Jet 35**\n\nM-Jet 30: https://www.cgtrader.com/3d-print-models/hobby-diy/other/m-jet-3d-printable-jet-drive-for-rc-boats\n\nM-Jet 35: https://www.cgtrader.com/3d-print-models/hobby-diy/other/m-jet-35-3d-printable-jet-pump-for-rc-boats\n\nDevelopment log:\n07.10.2023 V0: The first hull file was uploaded.\n\n09.10.2023 V1: The hull has been splitted for printing. Geometry of the joints is partly taken from the Valkyrie, and partly inspired by solution in the Sprint. Flood chamber holes have been added. Turn fin mounts and trim tab mounts with new standard 16mm hole spacing (same as on Valkyrie) have been added. Pump interface for the M-Jet 35 has been added. Right now, the hull is printable and functional, even though it still misses many important features.\n\n13.10.2023 V2: TPU Lid added. Rear wing with mounting points added. Small changes on the turn fin and trim tab mounts were done to achieve cleaner geometry. Flood chamber rear hole was modified for faster flow out.\n\n16.10.2023 V3: Rear hull with interface for M-Jet 30 was added. Battery mount added. TPU lid for 220x220 print beds added. Increased size of the rear wing. Added mounting frame for the upcoming rollcage, pilots and engine.\n\n20.10.2023 V4: Whole new rollcage was added. Rollcage gets printed in 4 pieces with no supports. Maximum strength is utilised thanks to all \"pipes\" lying in XY and not Z axis on the print bed. Geometry of the deck frame was changed a little bit, and the rear locks were changed to use M5x20 grub screw with locking nut, similarly to Valkyrie. However, the frame should be still 90% compatible with the Ragnarok V3.\n\n26.10.2023 V5: \nBased on discussion with Sandro Flöry, the flood chamber size was increased by around 2mm. \nBig set of turn fins of various sizes was added. \nNew receiver drybox with mount. \n\n02.11.2023 V6:\nBig set of trim tabs.\nInfinitely stackable hull armour.\nNew zip tie ESC mount.\nNew bilge pump mount.\nFile organization, fastener list. STEP file with colours:)\n\n12.11.2023 V7: Turbocharged four rotor rotary engine inspired by Mazda 26B.\nThe engine can be printed with no supports. The only part that got changed compared to V6 is the Rollcage_base, other than that, the engine is ready to be dropped in. There is a drawing showing which fasteners to use for the engine assembly.\n\n26.11.2023 V8: Hull without flood chamber requested not only by Kai Reckleben was added. In conditions, where you don't need the self-righting at all, this only brings you advantages.\nFront bumper suggested by Ryan Frair was added, which can be mounted using a single M2x10. A helpful drawing showing assembly of the hull and fasteners used was added. Bilge pump mount was redesigned after discussion with Niklas Rösner. Two little holes to guide water out of the \"lid pool\" suggested by Joel Anderson were added.\n\n5.1.2024 V9: Pilots were added. \nThe hull was changed based on the idea of Ryan Frair and testing by Ryan and Lucygup Tham - the V-keel was extended, which has proven to provide better performance. Big thanks for your extensive testing work.\nThe ESC and drybox mounts were removed, now there are glue-on mounts available instead. This enables you to use different mounting positions, and to mount the ESC to the back for possibly better CG balance.\nFlotation cutting template was added.\n\n30.1.2024 V9.1: The screw alignment on the hull without flood chamber between the hull middle and hull rear was 1mm off. Thanks Joel Anderson for reporting this. The update 9.1 fixes this issue and changes the screw placement on both hull middle and hull rear of the floodchamber-less version. The floodchamber-less STEP file is updated too. No other files are changed.\n\n15.02.2024: Upon a request, a rear wing without \"RAGNAROK\" text was added into the rear wing folder in V9.1.\n\n08.03.2024 V10: Some people reported problems with self righting. To improve the self righting, height of the hull with flood chamber was increased by 6mm. This increases buyoancy on the top.\nAfter a discussion with Tom Hui Young, the area where trim tabs get mounted was beefed up to prevent cracks.\nBased on a suggestion from Michael Fre, the driver pilot was slightly modified to improve printability. Thanks everyone for your feedback!\n\n13.04.2024 V10.1: Based on a kind suggestion by rc3dprinter, the issue with a mirrored drybox base was corrected. The O-ring for the drybox was added to the excel part list. The STEP file was updated with the corrected drybox. No other files were changed. Thanks for your feedback.\n\n12.05.2024 V10.2: The lid files were all rotated and placed on the build plate, to make it clear how they should be printed. No geometry was changed.\n\n05.08.2024 V10.3: A little issue with the Drybox base, where the pin was placed on the wrong side, was corrected. Thanks for reporting the issue.\n\n05.09.2024 V10.4: A new Hull_rear compatible with the newest update of the M-Jet 30 has been added to the files. A modified deck knob for easier use by Sascha has been added too, thanks for sharing!\n\n20.11.2024 New photos were uploaded to CGTrader, there are no changes to the files.\n\n01.12.2024 V11: Highly improved documentation and full build video. Changed system of hull assembly, which removes majority of the issues caused by warping. This is achieved by flipping printing orientation of Hull front and introducing versions of Hull front with active warping compensation, which compensate for warping of Hull middle. Reworked turn fin mount in the style of Supersprint with one more (4th) slot. Mega turn fin set. Reduced printing overhang on the upper rear 45° plate of Hull rear.\n\n17.12.2024 V11.1: There was an issue that the hull rear without flood chamber was missing holes for trim tab mounts. This is now fixed. The following files have been corrected: Nochamber_hull_rear_for_M-Jet_30, Nochamber_hull_rear_for_M-Jet_35, Nochamber_hull_STEP. Thanks Peno for reporting the issue!\n\n14.05.2025 V11.2: The part list and manual was corrected to show part count of 16x M3x8 flat head instead of 12. 16x is necessary for the hull without flood chamber. Thanks Dan for reporting the issue. In the drawing on page 8, the M3x8 screws which mount the pilots should be flat head too - this was corrected in the drawing. There were no changes to any actual parts.\n","imageAlt":"jetsprint Ragnarok - 3D Printable RC Jetsprint Boat","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/ragnarok-3d-printable-rc-jetsprint-boat","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/tEEwnykkKWeseTYNiLt6crhj/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/P1150798.jpg","gridUrl":"https://media.cgtrader.com/variants/tEEwnykkKWeseTYNiLt6crhj/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/P1150798.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/ragnarok-3d-printable-rc-jetsprint-boat","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":215,"name":".png","is_native":false},{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/4823701/3cde511246/ragnarok-3d-printable-rc-jetsprint-boat-3d-model-3cde511246.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6765873","type":"listingItem","attributes":{"id":6765873,"title":"Yellowfin 39 Rc  Boat  Unoff Replica Split version","price":99.0,"description":"Here you will find the Yellowfin 39 replica model, ready to be 3D printed in separate sections and assembled.The model does not include the engines or the electronic components, which must be installed separately.\nThe construction method involves the use of brass heat-set inserts and screws.Additionally, to make the hull waterproof, it is recommended to use epoxy resin to bond and seal the joints.\nThis versione for 3D printer with build plate about 256x256 (like X1C Bambulab)\n\nOverall model dimension: 110 cm x 33 cm (without motors)","imageAlt":"Yellowfin 39 Rc Boat Unoff Replica 3D printable model 1","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/yellowfin-39-rc-boat-unoff-replica-split-version","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/rau1il9qjh7e5t464gbsbqyrmzlh/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/WhatsApp%20Image%202026-01-18%20at%2016.30.12.jpg","gridUrl":"https://media.cgtrader.com/variants/rau1il9qjh7e5t464gbsbqyrmzlh/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/WhatsApp%20Image%202026-01-18%20at%2016.30.12.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/yellowfin-39-rc-boat-unoff-replica-split-version","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6765873/3c13780943/yellowfin-39-rc-boat-unoff-replica-split-version-3d-model-3c13780943.webp","saleOffDiscount":70,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"7302733","type":"listingItem","attributes":{"id":7302733,"title":"RC Battleship Georgios Averof Instructions","price":0.0,"description":"These are a free set of instructions to build a 1/96th scale working RC model of the Greek Armoured Cruiser Georgios Averof, the files are available to purchase on CGTrader via this link  https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/rc-battleship-hn-georgios-averof-3d-model\n\nThe Hellenic Navy Armoured Cruiser, Georgios Averof, was built in Italy in 1909, bought by Greece in 1910 as the flagship of the Greek Navy and served in 2 world wars before being retired and preserved as a museum ship one can visit on the outskirts of Athens.\n\nThe model is fully working, with electric motors and Radio Control and was built on a 3D filament printer with a bed of at least 220mm cubed.  The model is 1/96th scale creating approximately a boat 1500mm long by 220mm wide.  It's an unusual subject as few model-makers build models of pre WW1, pre-Dreadnought battleships, and yet she is an impressive model to see pondside because of the wealth of scale detail modelled.","imageAlt":"RC Battleship Georgios Averof Instructions","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/rc-battleship-georgios-averof-instructions","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/5pvqkgod9pqxof2t2uu949x6rfk4/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/20260628_125718.jpg","gridUrl":"https://media.cgtrader.com/variants/5pvqkgod9pqxof2t2uu949x6rfk4/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/20260628_125718.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/rc-battleship-georgios-averof-instructions","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/7302733/6ad4953f75/rc-battleship-georgios-averof-instructions-3d-model-6ad4953f75.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"4949954","type":"listingItem","attributes":{"id":4949954,"title":"3D Print RC Boat Collection","price":40.0,"description":"**Overview**:\n\n- 2 RC yacht designed with 3d printing in mind. \n- Easy to print and little to none support material needed.\n- All parts connect easily with keys.\n- Dimensions: 750mm, 900mm, 800mm\n\n**What You Need (per boat)**:\n- A 3d printer with build volume at least 250mm x 210mm x 250mm.\n- About 2-3kg of PLA or PETG filament.\n- 2 x RC boat driveshaft (250mm / 200mm x 8mm).\n- 2 x A2212 brushless motor or any motor that can fit.\n- 2 x Bidirectional ESCs.\n- 2s or 3s LiPo battery.\n- A receiver for your RC controller.\n- A RC controller with differential thrust settings. \n\n**What’s Included**:\n- STL files compatible with most of slicer or 3d softwares.\n- 3MF files for Bambu Studio, all the printing parameter has been setup.\n- Installation instructions video.\n- PDF file for user guide.","imageAlt":"3D Print RC Boat Collection","url":"https://www.cgtrader.com/3d-model-packs/3d-print-rc-boat-collection","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/7MtNuFCdn35e7eJKpqpc5Hd7/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/3d-print-rc-boat-collection-3d-model-9c24655952.jpg","gridUrl":"https://media.cgtrader.com/variants/7MtNuFCdn35e7eJKpqpc5Hd7/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/3d-print-rc-boat-collection-3d-model-9c24655952.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-model-packs/3d-print-rc-boat-collection","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[],"categorySlug":"hobby-diy","subcategorySlug":"automotive","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Automotive \u0026 Car parts","schemaImageUrl":"https://img-new.cgtrader.com/items/4949954/9c24655952/3d-print-rc-boat-collection-3d-model-9c24655952.webp","saleOffDiscount":50,"eligibleForSubscription":false,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"7274236","type":"listingItem","attributes":{"id":7274236,"title":"RC  Tug     Flying Phantom    building instructions","price":0.0,"description":"These are the  instructions to build a scale 3D radio-controlled model tugboat with a link to the stl files that you can purchase through cgtrader.  \n\nThe tug was built in Glasgow on the River Clyde in 1981, for moving large ships in and out of the river, including some of the greatest ocean liners such as the QE2.  \n\nAs a model she is interesting because of the unusually tall fire monitor platforms that she was built with and these are designed to work in the model.  Despite these the model has proved extremely stable, and with single large propellor and Kort nozzle to steer (provided with the stl files), she is a fun and manouevrable model in both forwards and reverse.  She is excellent for competitive steering and docking competitions.  She is 1/48th scale but could be built larger or smaller as required.\n\nThe model was built totally on a filament printer.  The largest parts fit within a 220mm cube.\n\nAs a model this is a reasonably good starter model if new to 3D printing or model making.  There are approximately 50 parts to print and attach together.  Though there is considerable detail, most is built into the prints.  \n\nThis instruction book provides 25 pages of detail on the putting together as well as the mechanical parts required.\n\nAs always I am available through the messaging on cgtrader  to give help or advice.\n\nHere is the link the model to purchase   https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/rc-tug-flying-phantom-3d-print\n\n","imageAlt":"RC Tug Flying Phantom building instruc...","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/rc-tug-flying-phantom-building-instructions","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/91p9glrh1lzvbn6jomt4k56ox07b/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/25.jpg","gridUrl":"https://media.cgtrader.com/variants/91p9glrh1lzvbn6jomt4k56ox07b/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/25.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/rc-tug-flying-phantom-building-instructions","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/7274236/89000c3972/rc-tug-flying-phantom-building-instructions-3d-model-89000c3972.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"4374742","type":"listingItem","attributes":{"id":4374742,"title":"RC Boat Outboard Motor","price":25.0,"description":"assembly guid https://www.youtube.com/watch?v=2DaOoQ1ST14\n\nhttps://youtube.com/shorts/yOa6N4FIXxI\n\nhttps://youtube.com/shorts/YeKG-NVG5gs\n\ndimensions: 236x116x82\n\nparts list:\n- bearings - F604zz - 4 piece\n- shaft - diameter 4мм, length 80mm - 1 pcs\n- shaft - diameter 4мм, length 50mm - 1 pcs\n- Bevel gear 0.8M 15T (4мм hole) - 2 pcs\nhttps://www.aliexpress.com/item/1005003235943648.html?spm=a2g0o.order_list.order_list_main.10.5b661802jMDNuQ\n- motor 4082 1900kv\n- nut M2.5 - 2 pcs\n- nut M3 - 7 pcs\n- countersink screws M2.5x8 - 2 pcs\n- countersink screws M3x16 - 1 pcs\n- countersink screws M3x10 - 3 pcs\n- countersink screws M3x25(30) - 1 pcs\n- socket head screw M3x50 - 1 pcs\n- socket head screw M3x12(16) - 4 pcs\n- plastic washers 4mm (as gear shims) - 6 pcs\n- rc boat coupling 4mm to 5mm\nhttps://www.aliexpress.com/item/1005005956076956.html?spm=a2g0o.cart.shoppingCartRecommend.5.1edd38davfQjkQ\u0026gps-id=shoppingCartRecommend\u0026scm=1007.13440.311564.0\u0026scm_id=1007.13440.311564.0\u0026scm-url=1007.13440.311564.0\u0026pvid=b3e1c8a9-802f-4ac1-bb1a-e187c3d29892\u0026_t=gps-id:shoppingCartRecommend,scm-url:1007.13440.311564.0,pvid:b3e1c8a9-802f-4ac1-bb1a-e187c3d29892,tpp_buckets:668%232846%238111%231996\u0026pdp_npi=4%40dis%21USD%213.75%213.75%21%21%2126.44%2126.44%21%402103919917286766350912377e027e%2112000035017481467%21rec%21UA%21168665516%21XZ\u0026utparam-url=scene%3AshoppingCartRecommend%7Cquery_from%3A#nav-specification\n\nhttps://www.aliexpress.com/item/1005007008011409.html?spm=a2g0o.order_list.order_list_main.22.1bbd1802OFJP28\n\nmaximum prop diameter 50mm\n\n3D printing settings\nAll parts except the CAP were printed with PETG plastic.\nOrganic supports were used for the СAP and LEG parts\nlayer height - 0,15mm","imageAlt":"RC Boat Outboard Motor 3D print model","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/automotive/rc-boat-outboard-motor","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/sbhS8znUxLNdon8i68szNCZT/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/untitled.587.jpg","gridUrl":"https://media.cgtrader.com/variants/sbhS8znUxLNdon8i68szNCZT/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/untitled.587.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/automotive/rc-boat-outboard-motor","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"automotive","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Automotive \u0026 Car parts","schemaImageUrl":"https://img-new.cgtrader.com/items/4374742/fbe5ee9635/rc-boat-outboard-motor-3d-model-fbe5ee9635.webp","saleOffDiscount":70,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"premium"}},{"id":"7000790","type":"listingItem","attributes":{"id":7000790,"title":"HMS Belfast 3D printed rc working model Build Instructions","price":0.0,"description":"These are the the free building instructions for how to put together the stl files to build this model of the HMS Belfast cruiser warship.\n\nClick here to go to the model to purchase   https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/hms-belfast-3d-printed-rc-working-model-battleship","imageAlt":null,"url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/hms-belfast-3d-printed-rc-working-model-build-instructions","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/dakp1rlinr4ddxgjvmak3xnls625/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/0dbaa223-2b1c-4bd3-bc7f-4c7e1f4757fb.jpg","gridUrl":"https://media.cgtrader.com/variants/dakp1rlinr4ddxgjvmak3xnls625/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/0dbaa223-2b1c-4bd3-bc7f-4c7e1f4757fb.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/hms-belfast-3d-printed-rc-working-model-build-instructions","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/7000790/de1479aad8/hms-belfast-3d-printed-rc-working-model-build-instructions-3d-model-de1479aad8.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"4687525","type":"listingItem","attributes":{"id":4687525,"title":"Fast 82cm Mono Hull 80kmh Rc Boat","price":15.0,"description":"THIS PRODUCT ONLY INCLUDES DIGITAL FILES FOR 3D PRINTING\n\nThis is a improved version from scratch of my previous 3d printed rc boat. It has been designed for speed and is a lot faster than my last 3d printed rc boat despite that I used the exact same electronics and hardware. The main inspiration is the Pursuit from TFL hobby. My top speed record is 83,2kmh using the setup down below. Biggest hull section part is 205mm high and 240mm wide, which makes the boat ideal to be printed on a Prusa MK3S+/MK4 or anything similar in size. I have designed it to fit a TFL carbon motor mount at the rear, and a rc boat metal hardware kit from ebay at the transom. An optional transom without pre-printed holes is included for those who wish to put their own parts. \n\nI have printed my boat in white PLA, super glued the hull sections together, and then fiberglass reinforced it using 110g/m^2 glass weave and laminating epoxy. I did this because the hull thickness is decreased to 50% of my previous boat. Now it is 1.75mm thick. I wanted a lighter boat for more speed. Then I spray painted it and applied clear laquer.\n\nA nice feature with this boat is that you can modify and remove the bolt-on transom if your specific parts does not fit. This also makes it easier to fix your boat if for example something hits the rudder at high speeds and the rudder mount breaks.\n\nHere is the link for a look in Fusion 360:\nhttps://www.youtube.com/shorts/yV9BPqB-5R4\n\n**Print settings**:\n- 4 perimeters/walls\n- 50% infill\n- 0.4 mm nozzle (a bigger one can be used to reduce print times)\n- 0.2 mm layer height\n- No supports except for the \"Transom alt1\" part\n\n**My Electronics setup**: \n- **Motor**: Leopard 4074 1750kv \n- **ESC**: HW Seaking 180A \n- **Prop**: eBay CNC X445 \n- **Servo**: PowerHD 20kg waterproof \n- **Batteries**: 2x VP-Flight 3s 25c 4000mAh in series (6S) \n- **Connectors**: XT90, 6mm bullets \n- **Battery straps**: Hacker motors \n- **Transmitter and receiver**: Flysky GT3C and Flysky GR3E\n\n**Hardware**: I used a rc boat hardware kit from eBay that included rudder, propeller, flexshaft, strut, turn fins and trim tabs. You will also need 4x M4 screws, 4x M4 3d printer inserts and some window trim for the lid. A water cooling tubing will also be needed.","imageAlt":"3D printable model Fast 82cm Mono Hull 80kmh Rc Boat","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/fast-82cm-mono-hull-80kmh-rc-boat","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/67cETj2NdV85bYSSrhStCqW4/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Preview1.jpg","gridUrl":"https://media.cgtrader.com/variants/67cETj2NdV85bYSSrhStCqW4/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Preview1.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/fast-82cm-mono-hull-80kmh-rc-boat","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":129,"name":".3mf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/4687525/d87fb861e3/fast-82cm-mono-hull-80kmh-rc-boat-3d-model-d87fb861e3.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"4684315","type":"listingItem","attributes":{"id":4684315,"title":"Valkyrie - 3D Printable RC Jetski","price":0.0,"description":"If your CGTrader download does not work (CGTrader problem with free models): \nhttps://drive.google.com/drive/folders/1styB4QI2GaHHA3whyvMPpG5d6PbqVlBh?usp=sharing\n\nThe Valkyrie RC Jetski is a result of a collaboration between M-Jet Development and Pascal Robert RC Creations.\nM-Jet Development YT channel: https://www.youtube.com/@mjetdevelopment \nPascal Robert RC Creations YT channel: https://www.youtube.com/@Pascal_Robert--Rc_Creations\n\nThe Valkyrie is compatible with the M-Jet 35 and newly also with the M-Jet 30. \nM-Jet 35: https://www.cgtrader.com/3d-print-models/hobby-diy/other/m-jet-35-3d-printable-jet-pump-for-rc-boats \nM-Jet 30: https://www.cgtrader.com/3d-print-models/hobby-diy/other/m-jet-3d-printable-jet-drive-for-rc-boats\n\nRequired 3D printer size to print the Valkyrie: Minimum build volume 245mm x 170mm build plate x 180mm height. Fits on a Prusa MK3.\n\nPlease read all important information in the Valkyrie brief manual.\nValkyrie brief manual: https://drive.google.com/file/d/1By05K_l5u-2NC5qZtfhret04H_sKYanm/view?usp=sharing\nValkyrie part list: https://docs.google.com/spreadsheets/d/12Jrfg9lKi8mDH0SsEMxIWp57bXUV5gir/edit?usp=sharing\u0026ouid=114321917833490201706\u0026rtpof=true\u0026sd=true\n\nUpdate 11.9.2023: For convenience, all files in the Valkyrie_electric folder were rotated to ensure correct orientation on the printer build plate. This also applies to the folder Accessories in the Valkyrie_nitro folder. Other files of the nitro version were not modified.\n\nUpdate 28.9.2023: Link to a nitro version build tutorial by Pascal Robert was added to the manual!\n\nUpdate 5.10.2023: For the electric version, two more softer TPU lid versions were added to allow using harder TPU. Higher stiffness / hardness of the TPU can be compensated by thinner walls of the lid by design. Read explanation in the folder \"Valkyrie_electric / Lid\".\n\nUpdate 11.10.2023: All folders were moved into one zip file to reduce the amount of CGTrader download errors. This is due to the model being free, there is a weird free download limit which I unfortunately cannot do anything about.\n\nUpdate 10.02.2024: Full STEP files for both the electric and nitro version were added.\n\nUpdate 8.3.2024: An issue with Valkyrie electric \"valkyrie_seat_rear\" where the surface on the build plate was not straight has been fixed. \n\nUpdate 5.5.2024: A lid mod for a 220x220 print bed size, ported from the Ragnarok, was added into the Valkyrie electric lid folder.\n\nUpdate 05.09.2024 V1.1: A new hull_rear for the electric Valkyrie version compatible with the newest update for the M-Jet 30 has been added. Some misleading duplicit folders have been fixed.\n\nUpdate 07.11.2024 V1.2: A new front bumper mod by Kristof has been added into the mods folder. Thanks for sharing!\n\nUpdate 18.07.2025 V1.3: A new hull rear with integrated housing of the M-Jet 30 by Kristof was added, thank you!","imageAlt":"Valkyrie - 3D Printable RC Jetski","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/valkyrie-3d-printable-rc-jetski","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/PJkYmRFZ6FrGBJc1NMTMxh3x/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/P1150082.jpg","gridUrl":"https://media.cgtrader.com/variants/PJkYmRFZ6FrGBJc1NMTMxh3x/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/P1150082.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/valkyrie-3d-printable-rc-jetski","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":100,"name":".pdf","is_native":false},{"id":51,"name":".stl","is_native":false},{"id":129,"name":".3mf","is_native":false},{"id":216,"name":".jpg","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/4684315/8bc1db07f7/valkyrie-3d-printable-rc-jetski-3d-model-8bc1db07f7.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"2482040","type":"listingItem","attributes":{"id":2482040,"title":"8th Scale 1940 Chris Craft Barrell Back RC Boat Model","price":19.95,"description":"3D Print your own 1/8th scale R/C boat model replica of a 1940 Chris Craft Barrell-Back Mahogany Runabout using these digital files and instructions. \nFiles provided: \n- 37 Page photo illustrated instructions including tools list and material list including RC components and running hardware\n- G-Code files for every component\n- STL files for every component \n- PDF drawings, templates, gauges, and flags\n\nA store bought model kit of this boat costs upwards of $400. With these plans; you can make your own for less than $50 in materials! And, you can make one for your friends and family as well!\n\nThe final dimensions of this boat are: 29-1/2\" long x 9-1/2\" wide x 5-1/2\" tall.\n\nThis is a solid model that will provide hours of enjoyment in building and running. The veneer laminated finish provides the authentic look of a traditional wood model but, with the added durability of a plastic structure. \n\nUpon receipt of payment; you will be able to download the five zip. files directly from CG Trader that contain the items listed above.\n\nAs always; please feel free to message me if you have any questions. Thank you!","imageAlt":"8th Scale 1940 Chris Craft Barrell Back RC Boat","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/8th-scale-1940-chris-craft-barrell-back-rc-boat-model","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/TZd6q1hJFVkJ8tZ5Ws7FqeGF/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/1940%20CC%20Barrel%20Back%20Assembly%20Instructions%2C%20Cover.jpg","gridUrl":"https://media.cgtrader.com/variants/TZd6q1hJFVkJ8tZ5Ws7FqeGF/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/1940%20CC%20Barrel%20Back%20Assembly%20Instructions%2C%20Cover.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/8th-scale-1940-chris-craft-barrell-back-rc-boat-model","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":100,"name":".pdf","is_native":false},{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/2482040/0152ac166a/8th-scale-1940-chris-craft-barrell-back-rc-boat-model-3d-model-0152ac166a.webp","saleOffDiscount":30,"eligibleForSubscription":true,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":"premium"}},{"id":"3570377","type":"listingItem","attributes":{"id":3570377,"title":"1 100 Fishing boat RC Model Ship Instructions 3D print model","price":0.0,"description":"This is the instruction manual and interactive 3D PDF files for the 3D Printed 1:100 scale Fishing boat RC Model that can be downloaded for free. This information is included in the purchased package containing the STL files for 3D Prining the model.","imageAlt":"1 100 Fishing boat RC Model Ship Instructions 3D print 1","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/1-100-fishing-boat-rc-model-ship-instructions-3d-print-model","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/T8JQDKgazbCuesAdfNsKbUMF/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Catturas.jpg","gridUrl":"https://media.cgtrader.com/variants/T8JQDKgazbCuesAdfNsKbUMF/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Catturas.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/1-100-fishing-boat-rc-model-ship-instructions-3d-print-model","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/3570377/53ebfdc943/1-100-fishing-boat-rc-model-ship-instructions-3d-print-model-3d-model-53ebfdc943.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"4520548","type":"listingItem","attributes":{"id":4520548,"title":"8th Scale 1955 Chris Craft Cobra RC Boat 3D Print files and Inst","price":19.99,"description":"3D Print your own 1/8th scale R/C boat model replica of a 1955 Chris Craft Cobra Runabout using these digital files and instructions. \nFiles provided: \n- Photo illustrated instructions including tools list and material list including RC components and running hardware\n- STL files for every component \n- PDF drawings, templates, gauges, and flags\n\nA store bought model kit of this boat costs upwards of $400. With these plans; you can make your own for less than $50 in materials! And, you can make one for your friends and family as well!\n\nThe final dimensions of this boat are: 26-1/2\" long x 9-3/4\" wide x 8\" tall.\n\nThis is a solid model that will provide hours of enjoyment in building and running. The veneer laminated finish provides the authentic look of a traditional wood model but, with the added durability of a plastic structure. \n\nAs always; please feel free to message me if you have any questions. Thank you!","imageAlt":"8th Scale 1955 Chris Craft Cobra RC Boat 3D Print files 2","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/8th-scale-1955-chris-craft-cobra-rc-boat-3d-print-files-and-inst","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/AJtHhhFUbHkHYJqDwHgMDyKz/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Pages%20from%20Chris%20Craft%20Cobra%20Assembly%20Instructions%20%26%20patterns_Page_1.jpg","gridUrl":"https://media.cgtrader.com/variants/AJtHhhFUbHkHYJqDwHgMDyKz/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Pages%20from%20Chris%20Craft%20Cobra%20Assembly%20Instructions%20%26%20patterns_Page_1.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/8th-scale-1955-chris-craft-cobra-rc-boat-3d-print-files-and-inst","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":100,"name":".pdf","is_native":false},{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/4520548/a08f0b8afe/8th-scale-1955-chris-craft-cobra-rc-boat-3d-print-files-and-inst-3d-model-a08f0b8afe.webp","saleOffDiscount":30,"eligibleForSubscription":true,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":"premium"}},{"id":"6872283","type":"listingItem","attributes":{"id":6872283,"title":"HMS Amazon Type 21 Build Instructions for 3D Printed Frigate","price":0.0,"description":"This is the instruction booklet to build a working radio controlled 3D model of the Type 21 Royal Navy Frigate HMS Amazon or her 7 sisterships at 1/72nd scale. \n\nThe Type 21 frigates were the first totally gas turbined frigates of the Royal Navy, built through the 1970's and used until the 1990's before being sold to the Pakistan Navy and used by them until very recently.\n\nThe ships could do a burst of speed of 37 knots though ordinary cruising speed was a speedy 18.\n\nThey fought with distinction in the Falklands War.  Two of the class were lost to enemy action.\n\nThe model can make any of the class, with the weaponry and fittings used throughout its service in the Royal Navy. \n\nThe illustrated instruction booklet will show you what is involved in building the model as well as giving details of the extra mechanical parts required to make the working model.  Though some fittings are moulded into the prints much has to be constructed from the detailed stl files provided.  It is a complex kit of some 200  parts which when complete makes an attractive and exciting model for display or sailing.\n\nThe parts are designed for a filament printer with a 220mm cubed bed.  I used a Creality K1 Max printer to print all parts, though some parts might show better detail using a resin printer.\n\nThe whole model has been successully printed at 1/72nd scale but is designed so that it can be printed at up to half that size.  However it has not yet been tested at smaller scales and a working model may be more difficulty too much smaller.\n\nAs always with my models I am very ready to respond to any queries about construction and am ready to design components for different size tubing for rudders and shafts. etc.\n\nHere is a link to the model to purchase  https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/hms-amazon-type-21-frigate-radio-controlled-model","imageAlt":"HMS Amazon Type 21 Build Instructions for 3D Printed 1","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/hms-amazon-type-21-build-instructions-for-3d-printed-frigate","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/qkhjg2cmwdt9n6zp8tqmuylhqqfg/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/20260301_112739.jpg","gridUrl":"https://media.cgtrader.com/variants/qkhjg2cmwdt9n6zp8tqmuylhqqfg/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/20260301_112739.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/hms-amazon-type-21-build-instructions-for-3d-printed-frigate","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6872283/38fdce64e5/hms-amazon-type-21-build-instructions-for-3d-printed-frigate-3d-model-38fdce64e5.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"2226940","type":"listingItem","attributes":{"id":2226940,"title":"RC BOAT MYSTIC CATAMARAN","price":20.0,"description":"870x215x120мм\n\nmotor mount for 3660, 3650, 3674 motors\n\nshaft\nhttps://www.ebay.com/itm/4mm-Right-Flexible-Axle-Flex-Cable-Adjustable-Strut-Prop-Drive-Dog-for-Rc-Boat/113768034291?hash=item1a7d1a6ff3:g:1nIAAOSwYi5b4TMG","imageAlt":"3D printable model RC BOAT MYSTIC CATAMARAN","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/rc-boat-mystic-catamaran","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/4ccbui2R3VBPHnqhQg5tjdJq/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/DSC_0372.jpg","gridUrl":"https://media.cgtrader.com/variants/4ccbui2R3VBPHnqhQg5tjdJq/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/DSC_0372.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/rc-boat-mystic-catamaran","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/2226940/4c91bf295d/rc-boat-mystic-catamaran-3d-model-4c91bf295d.webp","saleOffDiscount":70,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"3914276","type":"listingItem","attributes":{"id":3914276,"title":"4G Sprint Hull for RC Boats 2022","price":0.0,"description":"If your download on CGTrader does not work (CGTrader problem with free models):\nhttps://drive.google.com/drive/folders/1Cs3RVnAJXVN2GNslU-_rHyk-QtuGCFWe?usp=drive_link\n\nJoin the official M-Jet facebook group! https://www.facebook.com/groups/623045356071128\n\nThis is the new version of my 50cm jetsprint hull. You get all files I used to build my hull. It can be made using fibreglass or carbon fiber.\n\nThe hull will work very well with the M-Jet 30 or M-Jet 35.\nFull build playlist:\nhttps://www.youtube.com/playlist?list=PLiFskGz_svvQw7cqP4VM8fh8YDrXtK8r6\n\nUpdate 16.8.2022: Template for cutting the flood chamber hole was added to the Hull folder.\n\nUpdate 18.11.2022: STEP files for the cover lid assembly were added to the \"Cover lid\" folder.\n\nUpdate 19.11.2022: File for the rear wing was missing, now it was added into the \"Rear_wing\" folder.\n\nUpdate 28.12.2022: A DXF file for cutting the cover lid hull cut was added into the \"Hull\" folder.\n\nUpdate 4.1.2023: Two DXF files for cutting the flood chamber wall, and the rear flood chamber hole were added into the \"Hull\" folder. Please keep in mind that even after accurate CNC cut, the flood chamber wall will need a lot of sanding and tweaking to fit the inaccurate inner hull shape properly. \nAlso, STL and STEP files for a pipe bender to bend the rollcage were added into the \"Rollcage\" folder. \n\nUpdate 4.7.2023: A STEP file for the whole 4G hull, as well as a simplified STEP file of the hull shape, were added to the files. \n\nUpdate 25.8.2023: A new MODS_for_4G_Sprint_Hull folder was added. It contains a bottom mould file with the spray rails included in the mould. This might make the moulding process more difficult, but does not require glueing the spray rails on later.\n\nUpdate 11.10.2023: All folders were moved into one zip file to reduce the amount of CGTrader download errors. This is due to the model being free, there is a weird free download limit which I unfortunately cannot do anything about.\n\nUpdate 19.10.2023: New softer versions of the TPU lid with thinner walls for more flexibility and easier operation were added into the \"Cover Lid\" folder.\n\nUpdate 29.03.2024: Upon a request, the hull as a solid and also the hull splitted into top and bottom halves were uploaded in the STL file format into the \"Hull_solid_STL\" folder.","imageAlt":"4G Sprint Hull for RC Boats 3D printable model","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/4g-sprint-hull-for-rc-boats-2022","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/aVVsFnyAoJq7Bd19Ceza3x7j/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/4G%20Sprint%20Boat%20Build%20Part%201%20Carbon%20Fiber%20Hull_Moment2.jpg","gridUrl":"https://media.cgtrader.com/variants/aVVsFnyAoJq7Bd19Ceza3x7j/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/4G%20Sprint%20Boat%20Build%20Part%201%20Carbon%20Fiber%20Hull_Moment2.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/4g-sprint-hull-for-rc-boats-2022","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":129,"name":".3mf","is_native":false},{"id":100,"name":".pdf","is_native":false},{"id":7,"name":".dxf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"automotive","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Automotive \u0026 Car parts","schemaImageUrl":"https://img-new.cgtrader.com/items/3914276/ab3b824d17/4g-sprint-hull-for-rc-boats-2022-3d-model-ab3b824d17.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"875713","type":"listingItem","attributes":{"id":875713,"title":"Carp Fishing rc boat","price":29.0,"description":"Fishing rc boat, ideal for carp fishing!\n\nAbout 1.3 kg of PLA and 40 hours \n\nPayload ---- 4,5 kg !!!","imageAlt":"Carp Fishing rc boat 3D print model","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/fishing-rc-boat","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/RvTPQ8etCLUsNaKKRLosW6gG/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/fishing-rc-boat-3d-model-stl.jpg","gridUrl":"https://media.cgtrader.com/variants/RvTPQ8etCLUsNaKKRLosW6gG/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/fishing-rc-boat-3d-model-stl.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/fishing-rc-boat","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/875713/ae6eed229a/carp-fishing-rc-boat-3d-model-ae6eed229a.webp","saleOffDiscount":70,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6646150","type":"listingItem","attributes":{"id":6646150,"title":"Europic Ferry radio controlled model ship Building Instructions","price":0.0,"description":"This is the instruction booklet for a radio controlled model at 1/96th scale of the MV Europic Ferry.\n\nEuropic Ferry was a car ferry built in 1967 in Newcastle by Swan Hunter.  It sailed in the North Sea for Townsend Thoresen.  In 1982 it was requistioned by the British Government as a transport ship to the Falklands.  Later it sailed for P \u0026 O Ferries.\n\nAs a radio controlled model it is around 1370mm long with twin motors and provides an unusual subject that will impress at the model boat pond!  \n\nThe  whole can be printed on a filament printer with a bed 220mm square, using PETG filament.  It would be possible to print the model smaller at 1/144th scale.\n\nThese instructions are provided free so that you can see what is involved in the creation of the model before purchase.\n\nHere is a link to the model for purchase on cgtrader....   https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/mv-europic-ferry-rc-ship-boat","imageAlt":"Europic Ferry radio controlled model ship Building","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/europic-ferry-radio-controlled-model-ship-building-instructions","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/wmoytqr6kml3g0lmvtopel41hrkv/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/20251130_111418.jpg","gridUrl":"https://media.cgtrader.com/variants/wmoytqr6kml3g0lmvtopel41hrkv/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/20251130_111418.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/europic-ferry-radio-controlled-model-ship-building-instructions","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6646150/009fd6c3f8/europic-ferry-radio-controlled-model-ship-building-instructions-3d-model-009fd6c3f8.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"4834557","type":"listingItem","attributes":{"id":4834557,"title":"RC Superyacht","price":25.0,"description":"**If you have any questions about the model, send me a message by clicking the email icon on the right side of my avatar, I'll get back to you as soon as possible!**\n\n**Recommend printing from the 3MF files, as most modern slicers support them. STL files do not contain unit information, so their scale can be interpreted differently by the software, especially for very small parts, which may lead to incorrect sizing.**\n\n**12.28.2024**:   MRSD_Separated_Windows.3mf / stl -  Updated parts with windows separated so you can easily print different colors.\n\n**01.16.2024**:   Mrs-D-V2.step added for anyone who wants to modify it.\n\n**01.03.2024**:   Bathtub and rearplatform updated.\n\u003e Bathtub.stl - Bathtub has been updated with water block and observation window.\n\n\u003e RearPlatform.stl - Teak effect for the rear platform added.\n\n**12.30.2023**:   StepTreads.stl - Step treads for the upper deck has been added.\n\n**12.27.2023**:   Whole model STL files added. \n\n\u003e MRS_D_Sliced.STL - V2 version in one file.\n\n\u003e MRS_D_V0_Separated.STL - An older design with most color in separated parts.\n\n**10.18.2023**:   V2 has been added with updated fins on the bottom of the ship and lower the battery position.\n\n\n**Note**:  This is the 3d printable version of the yacht, you can get the render version here: \n\n\u003e https://www.cgtrader.com/3d-models/watercraft/recreational-watercraft/next-superyacht-mrs-d\n\n**Overview**:\n\n- A RC superyacht designed with 3d printing in mind. \n- Easy to print and minimize the support material needed.\n- All parts connect easily with keys.\n- Dimensions: 900mm x 184mm x 274mm\n\n**What You Need**:\n- A 3d printer with build volume at least 250mm x 210mm x 210mm.\n- About 3kg of PLA or PETG filament.\n- 2 x RC boat driveshaft with universal coupling (250mm x 3mm inner core, 200mm x 8mm outer tube, 30mm propeller).\n- 2 x A2212 brushless motor or any motor that’s smaller then 39mm \ndiameter.\n- 2 x Bidirectional ESCs.\n- 2s or 3s LiPo battery.\n- A receiver for your RC controller.\n- A RC controller with differential thrust settings. \n\n**What’s Included**:\n- STL files compatible with most of slicer or 3d softwares.\n- 3MF files for Bambu Studio, all the printing parameter has been setup.\n- Installation instructions video: \n\n\u003e https://youtu.be/Dt9MR2oC6qE\n\n- PDF file for user guide:  \n\n\u003e https://drive.google.com/file/d/1eBP3KlRyBQ1fqv3wGRGUg8IVm9f-4cvG/view?usp=sharing\n\n- **Related Models**: \n\nRC Jet Superyacht: \n\n\u003e https://www.cgtrader.com/3d-print-models/hobby-diy/automotive/rc-jet-superyacht\n\nRC Catamaran: \n\n\u003e https://www.cgtrader.com/3d-print-models/hobby-diy/automotive/3d-print-rc-catamaran\n","imageAlt":"3D print model RC Superyacht","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/rc-superyacht-mrs-d","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/JWmqL6u1CQAq3DdK9euzBSEz/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/3dprint1.jpg","gridUrl":"https://media.cgtrader.com/variants/JWmqL6u1CQAq3DdK9euzBSEz/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/3dprint1.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/rc-superyacht-mrs-d","isCgtVerified":true,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":129,"name":".3mf","is_native":false},{"id":51,"name":".stl","is_native":false},{"id":72,"name":".stp","is_native":false},{"id":null,"name":null,"is_native":false},{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/4834557/4825161b85/rc-superyacht-3d-model-4825161b85.webp","saleOffDiscount":50,"eligibleForSubscription":false,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"5492682","type":"listingItem","attributes":{"id":5492682,"title":"TPU Warrior - 3D printable RC jetboat for rapids","price":0.0,"description":"If your download doesn't work, use google drive: https://drive.google.com/drive/folders/1hOYvX5Z5XyFbGiKl3WwwpJka6ZQzHphw?usp=sharing\n\nTPU Warrior is a free 3D printable highly experimental jetboat hull, designed to be printed almost fully in TPU. \nThe purpose of such design is to achieve durability on rapids, which would not be possible with any standard stiff 3D printed material.\nTPU Warrior requires minimum printer volume of 250x250x230mm.\nIt does have some documentation but no full build video, you need to know what you are doing. \n\nTPU Warrior is compatible with M-Jet 35.\n\nM-Jet 35: https://www.cgtrader.com/3d-print-models/hobby-diy/other/m-jet-35-3d-printable-jet-pump-for-rc-boats","imageAlt":"TPU Warrior - 3D printable RC jetboat for","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/tpu-warrior-3d-printable-rc-jetboat-for-rapids","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/4fUhRRoEPNh1ciNbSbVyT1iG/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/TPU%20Warrior%20Failed%20Test%20-%20frame%20at%200m10s.jpg","gridUrl":"https://media.cgtrader.com/variants/4fUhRRoEPNh1ciNbSbVyT1iG/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/TPU%20Warrior%20Failed%20Test%20-%20frame%20at%200m10s.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/tpu-warrior-3d-printable-rc-jetboat-for-rapids","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/5492682/61da4c2660/tpu-warrior-3d-printable-rc-jetboat-for-rapids-3d-model-61da4c2660.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6967559","type":"listingItem","attributes":{"id":6967559,"title":"1958 Chris-Craft Silver Arrow RC Boat Model 3D Print Files","price":19.99,"description":"Bring one of Chris-Craft’s rarest late-1950s icons to your workbench with this highly detailed 3D printable RC boat model of the 1958 Silver Arrow, designed for 1/10 scale radio control or display. Inspired by the original 19 ft fiberglass-over-wood runabout with its dramatic fins and V8 power, this model captures the sleek lines, classic two-tone styling, and unique personality of the full-size Silver Arrow in a build you can print at home.\n\nWhat you’re getting\nDigital download only: STL files and PDFs (no physical boat or hardware included).\n​\nSTL files for every component needed to build the 1/8 scale hull, deck, interior, and detail parts of the Silver Arrow. (Trailer not included)\n\n20 page Photo-illustrated instructions (PDF) covering tools, recommended materials, 3D print settings, and step-by-step assembly.\n\nPrintable decal page with flags, cockpit gauges, Chris Craft logos, and dashboard badge\n\nScale and RC details:\nDesigned around a 1/8 scale interpretation of the 19 ft Silver Arrow (28-1/2\" in finished hull length).\n\nHull and structure are engineered for modern electric RC running gear: typical RS-540 or 28–36 mm brushless motor, LiPo pack, and standard servo (components not included).\n\nInternal framing, motor mount, and rudder/strut locations are laid out to support reliable performance on ponds and small lakes.\n\nCan be built as a fully functional RC boat or as a static display model for Chris-Craft and vintage runabout collectors.\n\nDesign features:\nClassic Silver Arrow styling with sculpted fins, wraparound windshield area, and flowing sheer line faithful to the original 1958 design.\n\nSeparate printable parts for deck trim, seats, and engine hatch so you can paint and detail them individually for a showroom finish.\n\nHull split into printer-friendly sections that can be joined for strength and accuracy.\n\nDesigned with FDM printing in mind (standard 0.4 mm nozzle), with wall thicknesses and fillets tuned for durability on the water.\n\nSkill level and who it’s for:\nIdeal for intermediate to advanced 3D printing and RC hobbyists who enjoy detailed projects and scale accuracy.\n\nGreat project for classic boat enthusiasts, Chris-Craft fans, and model builders who appreciate late-1950s fiberglass runabouts and want something unique at the pond.\n\nAlso well suited for display-only builders who want a striking mid-century Silver Arrow for office, shop, or boathouse decor.\n\nHow the digital download works:\nThis is an instant digital download; once your payment is confirmed, Etsy will provide links to download your STL and PDF files directly from your account.\n​\nFiles are delivered in one or more ZIP archives containing all STL parts and documentation; you can save, back up, and reprint them as often as you like for your own use.\n\nNo hardware, electronics, paint, or physical parts are included—photos of printed or finished models are examples of what you can build from these files.\n​\nIf you have questions about print settings, scaling, or RC setup before or after purchase, send a message anytime—I’m happy to help you get your Silver Arrow on the water and turning heads like the original 1958 classic.","imageAlt":"1958 Chris-Craft Silver Arrow RC Boat Model 3D Print","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/1958-chris-craft-silver-arrow-rc-boat-model-3d-print-files","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/3pqaisssi4lx410m54m2t8arq5l1/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Chris%20Craft%20Silver%20Arrow%20Assembly%20Instructions.jpg","gridUrl":"https://media.cgtrader.com/variants/3pqaisssi4lx410m54m2t8arq5l1/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Chris%20Craft%20Silver%20Arrow%20Assembly%20Instructions.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/1958-chris-craft-silver-arrow-rc-boat-model-3d-print-files","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":null,"name":null,"is_native":false},{"id":51,"name":".stl","is_native":false},{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6967559/97d85b77b8/1958-chris-craft-silver-arrow-rc-boat-model-3d-print-files-3d-model-97d85b77b8.webp","saleOffDiscount":30,"eligibleForSubscription":true,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":"premium"}},{"id":"5945138","type":"listingItem","attributes":{"id":5945138,"title":"KwikJet X Jetboat","price":0.0,"description":"This is KwikJet X V2, the successor of the beloved KwikJet X!\n\n\nRequirements:\n\n3D printer:\n– Minimum 3D printer build volume: 210 x 210 x 200mm\n\nAny standard slicing software (Cura, Simplify3D, Slic3r etc)\n\nplease visit our website https://protonrc.com for the printable files.","imageAlt":"KwikJet X Jetboat 3D printable model","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/kwikjet-x-jetboat","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/dtazm7tzajofbr3qymah19y2dr32/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/KwikJet-X-V2-main.jpg","gridUrl":"https://media.cgtrader.com/variants/dtazm7tzajofbr3qymah19y2dr32/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/KwikJet-X-V2-main.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/kwikjet-x-jetboat","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":100,"name":".pdf","is_native":false},{"id":129,"name":".3mf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/5945138/e5042a4ded/kwikjet-x-jetboat-3d-model-e5042a4ded.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"7281501","type":"listingItem","attributes":{"id":7281501,"title":"RC Boat 3D Printed 130 DC Motor","price":14.99,"description":"Welcome to my custom 3D-printed twin-motor RC boat project! Designed entirely from scratch in CAD, this sleek catamaran hull balances compact aesthetics with real, practical performance on the water.\n\nInside the hull, you will find a highly optimized layout engineered to keep the weight centered and the profile low. The internal compartment is pre-configured to cleanly seat a dual DC 130 motor setup alongside a dedicated motor driver and power assembly, powering a dual propeller shaft alignment. This design allows you to explore differential thrust mechanics without needing a complex hardware setup, making it an accessible and highly rewarding project for any hobbyist.\n\nThe files are split to print smoothly on standard 3D printer beds, requiring minimal support material while maintaining strong structural integrity. The removable canopy hatch offers easy access to the electronics bay for quick battery swaps and maintenance between runs.\n\nFrom the initial assembly on the workbench to hitting the water, this little boat is incredibly fun to build and steer. Download the files, drop in your electronics, and let me know how it performs on your first run!\n\nTERMS OF USE: This model is protected by copyright. Ownership and intellectual property rights remain with the author. You are not allowed to resell, distribute, or share this 3D model, or any modified version of it, on any marketplace or platform.","imageAlt":"RC Boat 3D Printed 130 DC Motor","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/rc-boat-3d-printed-130-dc-motor","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/wdmrb9urp7i6nojeay8o3wr1yp50/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Gemini_Generated_Image_jbkttljbkttljbkt.jpg","gridUrl":"https://media.cgtrader.com/variants/wdmrb9urp7i6nojeay8o3wr1yp50/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Gemini_Generated_Image_jbkttljbkttljbkt.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/rc-boat-3d-printed-130-dc-motor","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/7281501/4eed1d7442/rc-boat-3d-printed-130-dc-motor-3d-model-4eed1d7442.webp","saleOffDiscount":50,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":"premium"}},{"id":"6873204","type":"listingItem","attributes":{"id":6873204,"title":" 1 35 German S-100  Speedboat model free Building Instructions ","price":0.0,"description":"These are the Assembly Instructions for the 1/35th scale, 3D printable, radio controlled, German S-100 Class Schnellboot 3D model.\n\nPlease look through this to get an idea of how to build this 1000mm model ship. I've tried to explain the assembly process as clearly as possible to make it as simple as possible, \nbut if you have any questions, don't hesitate to contact me.\n\nThe instructions relate to a 1/35th scale model. The Hull is divided into 5 sections (200 mm each). The walls thickness is approximately 2 mm. The dimensions of the engines and\npropeller shafts are given for advisory purposes. \nModelers can install batteries and radio equipment at their own discretion.\n\nLink to the model visualization on YouTube is here: https://www.youtube.com/watch?v=htAdTxUze2s\n\nThe link to the model itself available for purchase is here: https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/german-s-100-class-schnellboot-3d-print-model","imageAlt":"1 35 German S-100 Speedboat model free Building","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/1-35-german-s-100-3d-print-model-building-instructions-free","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/58ryxhd3bb06mievzqdv13e2mhsx/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/01_KMS%20Schnellboot%20S100_Assembly%20Instructions.jpg","gridUrl":"https://media.cgtrader.com/variants/58ryxhd3bb06mievzqdv13e2mhsx/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/01_KMS%20Schnellboot%20S100_Assembly%20Instructions.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/1-35-german-s-100-3d-print-model-building-instructions-free","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6873204/6fa4ef0903/1-35-german-s-100-speedboat-model-free-building-instructions-3d-model-6fa4ef0903.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6784696","type":"listingItem","attributes":{"id":6784696,"title":"8TH SCALE RC BOAT TRAILER","price":9.99,"description":"This boat trailer was designed to display all of my 1:8 scale boat models and can be adapted in look and functionality. The fenders and wheels, with radial tires, were designed to coordinate with the retro styling of the Chris Craft boats of the late 1950's. However, the trailer takes on a more modern look without the fenders. The boat support planks are fully adjustable to conform to hulls of different shapes and the come-along and jack can also be moved to adjust for overall length. The wheels do roll if you intend to pull the trailer and I have added an optional carbon support rod to the spine for additional support. If using for a car; the wheelbase should be 7\". I have also included a step by step, photo illustarted, assembly guide with links to materials used.","imageAlt":"8TH SCALE RC BOAT TRAILER 3D print model","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/8th-scale-rc-boat-trailer","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/fdbpjbf8zsaetsm4ub3ggxohwxmf/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/IMG_3388.jpg","gridUrl":"https://media.cgtrader.com/variants/fdbpjbf8zsaetsm4ub3ggxohwxmf/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/IMG_3388.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/8th-scale-rc-boat-trailer","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6784696/a66e1df59a/8th-scale-rc-boat-trailer-3d-model-a66e1df59a.webp","saleOffDiscount":30,"eligibleForSubscription":true,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":"essentials"}},{"id":"6169610","type":"listingItem","attributes":{"id":6169610,"title":"1 48 Ton Class Minesweeper Building Instructions","price":0.0,"description":"These are the building instructions for the 1/48th scale, 3D printed, radio controlled, model of a Ton Class Minesweeper used by the British Royal Navy and other navies around the world\n\nPlease look through this to get an idea of how to build this 980mm model ship. I have tried to be as complete as possible in my description, to make the building experience as easy as possible.\n\nIt has been designed so that the model can be built in a variety of different scales from 1/72nd scale, 1/64th, 1/48th and 1/32nd scale, scaling the files.....  66%, 75%, 0%, 150%, to build the model at the size you wish.  However the instructions relate to a 1/48th scale model - sizes of motors and propellor shafts etc would need to be calculated for other scales.\n\nThe  link to the model itself available for purchase is here.....  https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/ton-class-minesweeper-radio-controlled-model","imageAlt":"1 48 Ton Class Minesweeper Building 3D printable model","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/1-48-ton-class-minesweeper-building-instructions","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/pwfajbmbm91ggtteplezrblggatl/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/20250527_172240.jpg","gridUrl":"https://media.cgtrader.com/variants/pwfajbmbm91ggtteplezrblggatl/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/20250527_172240.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/1-48-ton-class-minesweeper-building-instructions","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6169610/d918330e4b/1-48-ton-class-minesweeper-building-instructions-3d-model-d918330e4b.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6040007","type":"listingItem","attributes":{"id":6040007,"title":"Fast 3D Printed RC boat Deep Vee Mono Hull 27 Inch 680mm","price":18.5,"description":"3D model description\nThis is one of my best design and fast 3D printed rc boat. Hope you enjoy it!\n\nSpeed test video using 4S lipo battery:\nhttps://youtu.be/6s4yi1f_OfQ?si=57kSYJhyqW12kylF\n\nSpeed test using 4S and 6S:\nhttps://youtu.be/FOMpJd6Guk8?si=IKo6NEZiMBvPXn8K\n\nCompilation video:\nhttps://youtu.be/gOOV8KqAydU?si=ptAWumT2UO9CCQ8_\n\nUser guide sample:\nhttps://drive.google.com/file/d/1KNmYGVEBeXKmxIfAK6BqERhNwa6TXBgP/view?usp=sharing\n\nFile available on STL and 3MF Format\nFile include brushless motor mount, esc mount, battery tray and esc tray\nAll recommendation hardware, links and parts list available on Full Documentation’s File on downloads page\n\nSpecifications:\nLength: 27 inch\nWide: 8 inch\nMotor: 3674 2200kV\nESC: 150A\nHardware: TFL standard (stinger strut, trimtab, turn fins and rudder)\nShaft system: 4.76mm shafting system\n\nRecommendation:\nTo get the better hull performance on the water, you need to lining the boat using one layer fiberglass resin (without cloth) to get better waterproof and to increase the hull strength\n\nI don't allow a mass production for selling. If this is what you aim to do a contract with me is needed. Contact me at: 3dcreavity@gmail.com\nHow ever selling 1-2 boats a year to make room for new projects is ok\nIf you have any question feel free to contact me\n\n3D printing settings\n3D printer plate: 240x240mm (minimum)\nHull fillament: PLA+\nNozzle: 0.4mm","imageAlt":"Fast 3D Printed RC boat Deep Vee Mono Hull 27 Inch 680mm","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/fast-3d-printed-rc-boat-deep-vee-mono-hull-27-inch-680mm","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/4plp01uxibh3nd78ow65ylwjr9r4/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Fast%203D%20Printed%20Rc%20Boat_1.jpg","gridUrl":"https://media.cgtrader.com/variants/4plp01uxibh3nd78ow65ylwjr9r4/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Fast%203D%20Printed%20Rc%20Boat_1.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/fast-3d-printed-rc-boat-deep-vee-mono-hull-27-inch-680mm","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":129,"name":".3mf","is_native":false},{"id":51,"name":".stl","is_native":false},{"id":100,"name":".pdf","is_native":false},{"id":7,"name":".dxf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6040007/5f317bbbb8/fast-3d-printed-rc-boat-deep-vee-mono-hull-27-inch-680mm-3d-model-5f317bbbb8.webp","saleOffDiscount":0,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"premium"}},{"id":"6433436","type":"listingItem","attributes":{"id":6433436,"title":"North Carr lightship instruction booklet","price":0.0,"description":"Description\nThis is a free copy of the instruction booklet for the model of the North Carr lightship a link to the model is contained here https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/north-carr-light-ship-1-48th-scale\n\nThe North Carr lightship is the last remaining Scottish lightship. Built in 1933 she served off the coast of Fife in Scotland until 1975, then was a museum ship for many years. Now she is derelict and in the process of being de-constructed in Dundee.\n\nThe original was built in Glasgow in 1932 at the Pointhouse Shipyard. She was an unpowered ship designed to be towed out and anchored in place off Fife Ness to warn of the North Carr rocks which were a danger to shipping.\n\nIn December 1959 she was the subject of a tragic rescue mission. In a fierce storm the lightship broke her moorings and began to drift towards the shore with her crew. They put out a MayDay call which was responded to by the Broughty Ferry Lifeboat Mona. Unfortunately the lifeboat capsized during the rescue and its crew of eight were all lost. The lightship survived and was towed out to her moorings again with her crew safe.\n\nThe model is an accurate 1/48th scale model of the lightship, that floats on the water or can be used as a static model. The original ship is about to be lost for ever as she is about to be scrapped. The model is a small way of preserving the ship for posterity.\n\nAs indicated the model has no motor or propulsion, just like the original ship, but is designed to float as a working model. She can be fitted with a flashing light in the light tower - the access holes have been left for wiring.\n\nThe model at 1/48th scale is 700mm long, 160mm wide and stands to a height of 370mm tall. She is designed to be printed on a build plate of 200mm square. She can of course be printed either larger or smaller.\n\nThere is a detailed illustrated instruction booklet included giving a step by step set of instructions on how to put the mode;l together.\n\nAs with all my models I am very happy to respond to email requests for help if necessary while printing","imageAlt":"3D printable model North Carr lightship instruction","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/north-carr-lightship-instruction-booklet","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/z0jhzs4tac36cz8qisefws4av7cy/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/20250909_130031.jpg","gridUrl":"https://media.cgtrader.com/variants/z0jhzs4tac36cz8qisefws4av7cy/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/20250909_130031.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/north-carr-lightship-instruction-booklet","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6433436/8780fe299a/north-carr-lightship-instruction-booklet-3d-model-8780fe299a.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"2077575","type":"listingItem","attributes":{"id":2077575,"title":"rc boat RIVA","price":10.0,"description":"assembled hull length 617mm\n\nmotors:\n2212 1800...2200kv - 2 pieces\n\nservo:\nSG90 - 1 piece\nESC 30A - 2 pieces\n\nstainless shaft 3mm:\nL=245mm - 2 pieces\nL=60mm - 2 pieces\n\ncoupling 3x3.175 - 2 pieces\n\nteflon tube 6x3 as bearings","imageAlt":"rc boat RIVA toy 3D print model","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/rc-boat-riva","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/KCzJg2phNs7VfQ7USuaAjEhw/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/riva_002.jpg","gridUrl":"https://media.cgtrader.com/variants/KCzJg2phNs7VfQ7USuaAjEhw/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/riva_002.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/rc-boat-riva","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":29,"name":".ige","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/2077575/8f27df6b5a/rc-boat-riva-3d-model-8f27df6b5a.webp","saleOffDiscount":50,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6203737","type":"listingItem","attributes":{"id":6203737,"title":"MV Lochmor - Caledonian MacBrayne - instructions only","price":0.0,"description":"This file is the free **instructions only** for my **Lochmor** 3D print model, to allow buyers to see details of the build before purchase.\n\nThe full 3D print model is at **https://www.cgtrader.com/3d-print-models/miniatures/vehicles/mv-lochmor-caledonian-macbrayne-passenger-ferry-1979**\n\nThe **Lochmor** was built by Ailsa Shipbuilders of Troon for Caledonian MacBrayne’s passenger-only service from Mallaig to the Small Isles (Rum, Eigg, Canna and Muck). She was launched on 11th June 1979. Cargo could be carried on the open quarterdeck, including two cars. She was replaced by the larger car ferry **Lochnevis** in 2001, and after modification for tourist cruising in England, she moved to Iceland in 2015, being renamed **Sailor** in 2017; she appears to have been laid up there since 2023.\n\nThe model was designed at **1/72nd scale** giving a length of 43cm and beam 11cm. The prototype was designed to use the radio, twin motors, propellers and steering gear from the **Tugboat 686** model, which is available from AliExpress and many vendors on eBay etc. If you wish to use conventional propellers and rudders, you can print the two alternative hull parts included and sort out the motor and steering servo fittings yourself.","imageAlt":"MV Lochmor - Caledonian MacBrayne - 3D print model 1","url":"https://www.cgtrader.com/free-3d-print-models/miniatures/vehicles/mv-lochmor-caledonian-macbrayne-instructions-only","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/a86pcamavnp1y91htjcqoemib54r/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Preview1.jpg","gridUrl":"https://media.cgtrader.com/variants/a86pcamavnp1y91htjcqoemib54r/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Preview1.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/miniatures/vehicles/mv-lochmor-caledonian-macbrayne-instructions-only","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":100,"name":".pdf","is_native":false}],"categorySlug":"miniatures","subcategorySlug":"vehicles","categoryTitle":"Miniatures","subcategoryTitle":"Cars \u0026 Vehicles","schemaImageUrl":"https://img-new.cgtrader.com/items/6203737/d209f34b17/mv-lochmor-caledonian-macbrayne-instructions-only-3d-model-d209f34b17.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6315521","type":"listingItem","attributes":{"id":6315521,"title":"RC Boat Rudder","price":20.0,"description":"RC Boat Rudder Mount Assembly – 3D Model\n\nHigh-quality 3D model of a rudder mount system for RC boats, designed for realistic mechanical accuracy and smooth steering control.\nThe model includes detailed components such as the rudder blade, mounting bracket, bolts, and linkage arm.\n\nFeatures:\n\nClean and precise geometry\n\nRealistic mechanical design\n\nIdeal for rendering, simulation, or 3D printing\n\nAvailable in STL, STEP, OBJ, and other common 3D formats\n\nPerfect for RC boat designers, 3D hobbyists, and mechanical visualization projects.","imageAlt":"3D printable model RC Boat Rudder","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/rc-boat-rudder","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/losugsoy0dnnlfhhtfjxr7slwvdk/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Screenshot%202025-11-07%20153706.jpg","gridUrl":"https://media.cgtrader.com/variants/losugsoy0dnnlfhhtfjxr7slwvdk/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Screenshot%202025-11-07%20153706.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/rc-boat-rudder","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":59,"name":".sldprt","is_native":false},{"id":17,"name":".max","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6315521/9e9589507d/rc-boat-rudder-3d-model-9e9589507d.webp","saleOffDiscount":0,"eligibleForSubscription":true,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":"premium"}},{"id":"6002685","type":"listingItem","attributes":{"id":6002685,"title":"HMS Amethyst  Black Swan Sloop radio controlled Instructions","price":0.0,"description":"These are the building instructions for the 1/48th scale, 3D printed, radio controlled, model of HMS Amethyst.\n\nPlease look through this to get an idea of how to build this 1600mm model ship.  I have tried to be as complete as possible in my descriptionm, to make the building experience as easy as possible.\n\nHere is the link to the model itself available for purchase on CGTrader  https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/hms-amethyst-black-swan-sloop-radio-controlled-working-model\n\n****","imageAlt":"3D print model HMS Amethyst Black Swan Sloop radio 2","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/hms-amethyst-black-swan-sloop-radio-controlled-instructions","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/dknpgurcopeawkgpxvu5kfb3mu06/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/20250325_171412.jpg","gridUrl":"https://media.cgtrader.com/variants/dknpgurcopeawkgpxvu5kfb3mu06/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/20250325_171412.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/hms-amethyst-black-swan-sloop-radio-controlled-instructions","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6002685/0979699513/hms-amethyst-black-swan-sloop-radio-controlled-instructions-3d-model-0979699513.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"5677934","type":"listingItem","attributes":{"id":5677934,"title":"RC Jet Superyacht","price":25.0,"description":"**If you have any questions about the model, send me a message by clicking the email icon on the right side of my avatar, I'll get back to you as soon as possible!**\n\n**Overview**:\n\n- A jet powered RC trimaran superyacht designed with 3d printing in mind. \n- Easy to print and no support material needed.\n- All parts fit together easily with keys.\n- Dimensions: 915mm x 220mm x 258mm\n\n**What You Need**:\n\n- A 3d printer with build volume at least 220mm x 180mm x 200mm(Height).\n- About 2.2kg of PLA or PETG filament.\n\nPropulsion System: \n- 2 x 28mm water jet thruster with reverse bucket\n- 2 x 4mm shaft coupling for motors\n- 2 x 2835 brushless motor\n- 2 x 40A ESCs\n- 11.1v 3s LiPo battery\n\nControl System: \n- 4 x 9g servos\n- 4 x 150mm pushrod with ball head linkage\n- 4 x pushrod linkage stopper\n- 4 x 32mm waterproof rubber sleeve\n- 6-channel RC receiver and controller\n\nOptional Ornament\n- Model ship anchor chain\n- LED light strip for interior illumination\n\n**What’s Included**:\n- STL files compatible with most of slicer or 3d softwares.\n- 3MF files for Bambu Studio, all the printing parameter has been setup.\n- Engine bay STEP file, you can customize the engine bay for different motors and jet thrusters if you know about surface modeling.\n\n- Demo video: \n\n\u003e https://youtu.be/Mv7dE4quqv8\n\n- Assembly guide video: \n\n\u003e https://youtu.be/6TZWRlhI8qI\n\n- PDF file for user guide: \n\n\u003e https://drive.google.com/file/d/1oPdkKi12iG_eqEwpJ2E2Yo67EuDUYrov/view?usp=sharing\n\n\n**Related Models**: \n\nRC Superyacht: \n\n\u003e https://www.cgtrader.com/3d-print-models/hobby-diy/automotive/rc-superyacht-mrs-d\n\nRC Catamaran: \n\n\u003e https://www.cgtrader.com/3d-print-models/hobby-diy/automotive/3d-print-rc-catamaran\n","imageAlt":"RC Jet Superyacht 3D print model","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/rc-jet-superyacht","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/HsrjmNTeLtNWyZ6ehQuAKUeG/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/preview06.jpg","gridUrl":"https://media.cgtrader.com/variants/HsrjmNTeLtNWyZ6ehQuAKUeG/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/preview06.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/rc-jet-superyacht","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":129,"name":".3mf","is_native":false},{"id":51,"name":".stl","is_native":false},{"id":72,"name":".stp","is_native":false},{"id":null,"name":null,"is_native":false},{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/5677934/2ed60c3b51/rc-jet-superyacht-3d-model-2ed60c3b51.webp","saleOffDiscount":50,"eligibleForSubscription":false,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"2375339","type":"listingItem","attributes":{"id":2375339,"title":"Sprint Hull for RC Boats 2020","price":0.0,"description":"Join the official M-Jet facebook group! https://www.facebook.com/groups/623045356071128\n\nIf your download doesn't work, use google drive:\nhttps://drive.google.com/file/d/1z_gDTDkzWbjaS9WieeWjnbv0zp7MsGGD/view?usp=sharing\n\nSome people requested the 50cm hull files from my M-Jet 30 video. Here it is, but **keep in mind:** The design of the mould is by far not the best way to make a mould. My final hull works great, but do not except the mould design to be as refined and tested as the M-Jet pump. There is no manual included, only the video about making the hull.\n\nUpdate 23.11.2020: Step files for the hull and mould together with a pdf drawing were added.","imageAlt":"Sprint Hull for RC Boats 2020","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/jetsprint-hull-for-rc-boats","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/dmPvP3aygfJHge2NFU2yjjgu/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Hull_Thumbnail.jpg","gridUrl":"https://media.cgtrader.com/variants/dmPvP3aygfJHge2NFU2yjjgu/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Hull_Thumbnail.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/jetsprint-hull-for-rc-boats","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":72,"name":".stp","is_native":false},{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/2375339/9bd738007e/sprint-hull-for-rc-boats-2020-3d-model-9bd738007e.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"4885817","type":"listingItem","attributes":{"id":4885817,"title":"3D Print RC Catamaran","price":20.0,"description":"**Overview**:\n\n- A catamaran style RC yacht designed with 3d printing in mind. \n- Easy to print and no support material needed.\n- All parts connect easily with keys.\n- 3 mounting points for attaching any accessory\n- Dimensions: 750mm x 302mm x 208mm\n\n**What You Need**:\n- A 3d printer with build volume at least 210mm x 210mm x 250mm(height).\n- About 2.6kg of PLA or PETG filament.\n- 2 x RC boat driveshaft with universal coupling (250mm x 3mm inner core, 200mm x 8mm outer tube, 30mm propeller).\n- 2 x A2212 brushless motor or any motor that’s smaller then 60mm diameter.\n- 2 x Bidirectional ESCs.\n- 2s or 3s LiPo battery.\n- A receiver for your RC controller.\n- A RC controller with differential thrust settings. \n\n**What’s Included**:\n- STL files compatible with most of slicer or 3d softwares.\n- 3MF files for Bambu Studio, all the printing parameter has been setup.\n- STEP file for customizion.\n- Installation instructions video: https://youtu.be/aNSiPxIte-s\n- PDF file for user guide: https://drive.google.com/file/d/1XcthJ7xUsNTidrc4DEETYcru17O6kNiH/view?usp=sharing\n\n- **Related Models**: \n\nRC Superyacht: \n\n\u003e https://www.cgtrader.com/3d-print-models/hobby-diy/automotive/rc-superyacht-mrs-d\n\nRC Jet Superyacht: \n\n\u003e https://www.cgtrader.com/3d-print-models/hobby-diy/automotive/rc-jet-superyacht","imageAlt":"3D Print RC Catamaran","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/3d-print-rc-catamaran","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/dvnwyBn8h7Un3nU41QzThK8W/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/preview4.jpg","gridUrl":"https://media.cgtrader.com/variants/dvnwyBn8h7Un3nU41QzThK8W/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/preview4.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/3d-print-rc-catamaran","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":100,"name":".pdf","is_native":false},{"id":51,"name":".stl","is_native":false},{"id":129,"name":".3mf","is_native":false},{"id":null,"name":null,"is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/4885817/d093649c10/3d-print-rc-catamaran-3d-model-d093649c10.webp","saleOffDiscount":50,"eligibleForSubscription":false,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"4095910","type":"listingItem","attributes":{"id":4095910,"title":"Life raft with raft bed for rc models ","price":0.0,"description":"The set includes a raft bed and a raft half - to get a full model, you need to print two raft halves and a raft bed.\n\nDas Set enthält ein Floßbett und eine Floßhälfte - um ein vollständiges Modell zu erhalten, müssen Sie zwei Floßhälften und ein Floßbett drucken.","imageAlt":"Life raft with raft bed for rc models","url":"https://www.cgtrader.com/free-3d-print-models/miniatures/vehicles/life-raft-with-raft-bed-for-rc-models","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/XUupacibgwExxzGpqBAXBFLW/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/tratwa1.jpg","gridUrl":"https://media.cgtrader.com/variants/XUupacibgwExxzGpqBAXBFLW/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/tratwa1.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/miniatures/vehicles/life-raft-with-raft-bed-for-rc-models","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"miniatures","subcategorySlug":"vehicles","categoryTitle":"Miniatures","subcategoryTitle":"Cars \u0026 Vehicles","schemaImageUrl":"https://img-new.cgtrader.com/items/4095910/f03d7c3cb8/life-raft-with-raft-bed-for-rc-models-3d-model-f03d7c3cb8.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"2886336","type":"listingItem","attributes":{"id":2886336,"title":"RC Boat  ","price":21.99,"description":"Dimension RC boat model scale\n\n120 mm length over all\n20 mm height \n30 mm breadth\n","imageAlt":"navigation RC Boat 3D print model","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/automotive/rc-boat-14677cc8-b86a-44f3-a55d-149946cbf479","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/AbzRgCRXg5K6mPQuitocGogF/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/untitled.11.jpg","gridUrl":"https://media.cgtrader.com/variants/AbzRgCRXg5K6mPQuitocGogF/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/untitled.11.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/automotive/rc-boat-14677cc8-b86a-44f3-a55d-149946cbf479","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":12,"name":".obj","is_native":false},{"id":5,"name":".fbx","is_native":false},{"id":2,"name":".3ds","is_native":false},{"id":14,"name":".skp","is_native":false},{"id":140,"name":".zpac","is_native":false},{"id":117,"name":".gltf","is_native":false},{"id":149,"name":".bip","is_native":false},{"id":4,"name":".dwg","is_native":false},{"id":7,"name":".dxf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"automotive","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Automotive \u0026 Car parts","schemaImageUrl":"https://img-new.cgtrader.com/items/2886336/054757dc5b/rc-boat-3d-model-054757dc5b.webp","saleOffDiscount":70,"eligibleForSubscription":true,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":"premium"}},{"id":"3424516","type":"listingItem","attributes":{"id":3424516,"title":"1-72nd Titanic - PART 13 - MUST READ DESCRIPTION","price":0.0,"description":"This is the 13th piece to print and build the giant 1/72nd RMS Titanic model. \nYou will need to purchase and print all other files to complete the project as you go.\n\nYou will require a 3d printer with a minimum build volume of 300mm wide, 300mm deep, and 400mm tall. \n\nThis part does not require support structure.\nRecommend 3x shell layering with 15% infill, and a 0.8mm nozzle with 0.3mm layer height.\n\nAll STL files with an \"M\" in the name are to be printed twice (the second to be mirrored in your slicer along the X or Y axis).\nAssembly is pretty straightforward if you purchase and print each component in order. Instructions will be uploaded at the end.\nOnly dry-fit the model together until all components have been printed. \n\nHappy to help answer any questions along your build, but I only get online once every few months. \n\nHope you enjoy this build!\nBernie","imageAlt":"1-72nd Titanic - PART 13 - MUST READ 3D printable model","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/1-72nd-titanic-part-13-must-read-description","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/6a2f2Nzko27DXejb2mcyVLXd/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/20170927_150236.jpg","gridUrl":"https://media.cgtrader.com/variants/6a2f2Nzko27DXejb2mcyVLXd/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/20170927_150236.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/1-72nd-titanic-part-13-must-read-description","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/3424516/317a2b085b/1-72nd-titanic-part-13-must-read-description-3d-model-317a2b085b.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"4233859","type":"listingItem","attributes":{"id":4233859,"title":"Deep-V RC Boat 80cm for Rough Water","price":14.0,"description":"THIS ONLY INCLUDES FILES FOR 3D PRINTING\n\nThis is a remote controlled watercooled brushless rc boat that i have designed in Autodesk Fusion 360. It is a sharp deep v-hull for high speed racing in rough water. I have achieved over 55km/h with my current setup, but i know that it can go faster. The boat can be printed on a Prusa MK3S+ or anything similar. I have designed it to fit a TFL carbon motor mount and a rc boat metal hardware kit from ebay. It is watercooled and the batteries can be mounted on the sides of the hull. One good feature with this boat is that you can modify and remove the bolt-on transom if your specific parts does not fit. This makes it easier to fix your boat if for example something hits the rudder in high speeds and the rudder mount breaks. \n\nI have printed my boat in white PLA and painted it. \n\nPrint settings:\n- 6 perimeters/walls\n- 50% infill\n- 0.4 mm nozzle (a bigger one can be used to reduce print times)\n- 0.2 mm layer height\n-  No supports except for the \"Hull3\" and Battery holder parts\n\nMy Electronics setup:\n**Motor**: Leopard 4074 1750kv\n**ESC**: Seaking 180A \n**Prop**: eBay CNC X445 \n**Servo**: PowerHD 20kg waterproof \n**Batteries**: 2x VP-Flight 3s 25c 4000mAh in series (6S) \n**Connectors**: XT90, 6mm bullets \n**Battery** **straps**: Hacker motors \n**Transmitter** **and** **receiver**: Flysky GT3C and Flysky GR3E\n\nHardware:\nI used a rc boat hardware kit from eBay that included rudder, propeller shaft and strut, turn fins and trim tabs. You will also need 4x M4 screws, 4x M4 3d printer inserts and some window trim for the lid. A good rc boat watercooling tube is Traxxas 5759.\n\n","imageAlt":"Deep-V RC Boat 80cm for Rough 3D print model","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/fast-rc-boat-80cm","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/8GnZymGgPotW7Xwgmp3K826T/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/3B3F9547-E3B1-4DD4-B662-3358D36253C3_1_105_c.jpg","gridUrl":"https://media.cgtrader.com/variants/8GnZymGgPotW7Xwgmp3K826T/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/3B3F9547-E3B1-4DD4-B662-3358D36253C3_1_105_c.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/fast-rc-boat-80cm","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":129,"name":".3mf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/4233859/96c3e9ccab/deep-v-rc-boat-80cm-for-rough-water-3d-model-96c3e9ccab.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"3426484","type":"listingItem","attributes":{"id":3426484,"title":"1-72nd Titanic - PART 26 - MUST READ DESCRIPTION","price":0.0,"description":"This is the 26th piece to print and build the giant 1/72nd RMS Titanic model. \nYou will need to purchase and print all other files to complete the project as you go.\n\nYou will require a 3d printer with a minimum build volume of 300mm wide, 300mm deep, and 400mm tall. \n\nThis part does not require support structure.\nRecommend 3x shell layering with 15% infill, and a 0.8mm nozzle with 0.3mm layer height.\n\nAll STL files with an \"M\" in the name are to be printed twice (the second to be mirrored in your slicer along the X or Y axis).\nAssembly is pretty straightforward if you purchase and print each component in order. Instructions will be uploaded at the end.\nOnly dry-fit the model together until all components have been printed. \n\nHappy to help answer any questions along your build, but I only get online once every few months. \n\nHope you enjoy this build!\nBernie","imageAlt":"3D print model 1-72nd Titanic - PART 26 - MUST READ","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/1-72nd-titanic-part-26-must-read-description","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/BabsPGUMj8Woz2Av3CYdojsK/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/20170927_150236.jpg","gridUrl":"https://media.cgtrader.com/variants/BabsPGUMj8Woz2Av3CYdojsK/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/20170927_150236.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/1-72nd-titanic-part-26-must-read-description","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/3426484/f81d930af6/1-72nd-titanic-part-26-must-read-description-3d-model-f81d930af6.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"5823225","type":"listingItem","attributes":{"id":5823225,"title":"RC boat 400 mm","price":12.0,"description":"\u003e Introducing a 3D model of an RC boat\n\n\u003e The model has an aerodynamic profile for high speed and stability on the water.\n\n\u003e Length: 400 mm\n\n\u003e Housing type: monohull\n\n\n\u003e Представляем3D-модель радиоуправляемой лодки\n\n\u003e Модельобладает аэродинамическим профилем для высокой скорости и устойчивости на воде.\n\n\u003e Длина: 400 мм\n\n\u003e Тип корпуса: моногул\n \n\u003e Применение:для любителей RC-гонок, кастомизации и соревнований","imageAlt":"RC boat 400 mm 3D print model","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/rc-boat-400-mm","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/B12Lr7AtUehKowbyYpjhMdoF/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/photo_5246858308403457809_y.jpg","gridUrl":"https://media.cgtrader.com/variants/B12Lr7AtUehKowbyYpjhMdoF/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/photo_5246858308403457809_y.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/rc-boat-400-mm","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":129,"name":".3mf","is_native":false},{"id":51,"name":".stl","is_native":false},{"id":12,"name":".obj","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/5823225/c91a01551c/rc-boat-400-mm-3d-model-c91a01551c.webp","saleOffDiscount":50,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"premium"}},{"id":"5526022","type":"listingItem","attributes":{"id":5526022,"title":"Squid Bait","price":0.0,"description":"Description: 3D printable squid trolling fishing bait. Extremely effective in saltwater fishing, especially when fishing for groupers, snappers, and salmon.\n3D printing: Print with at least 15% infill, use at least two wall layers and print with supports","imageAlt":"3D print model Squid Bait","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/squid-bait","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/8J5s9nZmyt8gYqeRLYRb3Ngr/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/untitled.jpg","gridUrl":"https://media.cgtrader.com/variants/8J5s9nZmyt8gYqeRLYRb3Ngr/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/untitled.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/squid-bait","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":21,"name":".blend","is_native":true},{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/5526022/8a2db14ef5/squid-bait-3d-model-8a2db14ef5.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"2868115","type":"listingItem","attributes":{"id":2868115,"title":"RC boat Yacht","price":19.99,"description":"this rc modelling or yacht model with 80cm dimension Length of all","imageAlt":"3D printable model RC boat Yacht","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/automotive/rc-boat-yacht","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/BPbNGX9b893HjRYHLcRsydSm/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/untitled.685.jpg","gridUrl":"https://media.cgtrader.com/variants/BPbNGX9b893HjRYHLcRsydSm/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/untitled.685.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/automotive/rc-boat-yacht","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":12,"name":".obj","is_native":false},{"id":2,"name":".3ds","is_native":false},{"id":5,"name":".fbx","is_native":false},{"id":14,"name":".skp","is_native":false},{"id":149,"name":".bip","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"automotive","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Automotive \u0026 Car parts","schemaImageUrl":"https://img-new.cgtrader.com/items/2868115/ed81dfb00b/rc-boat-yacht-3d-model-ed81dfb00b.webp","saleOffDiscount":30,"eligibleForSubscription":true,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":"premium"}},{"id":"6458602","type":"listingItem","attributes":{"id":6458602,"title":"La Fayette Class Frigate class inspired battleship","price":0.0,"description":"This 3D model is inspired by the French La Fayette class frigate (you can see the difference in the haul and other section of the ship), reimagined as a futuristic battleship. Designed with clean geometry and naval-inspired details, the model is perfect for anyone interested in modern warship aesthetics, naval enthusiasts, or hobbyists looking for unique 3D prints.","imageAlt":"3D printable model La Fayette Class Frigate class inspired","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/la-fayette-class-frigate-class-inspired-battleship","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/7sq1vr7wd1qmb1m52df9oxun4qt7/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/PXL_20250921_011618742~2.jpg","gridUrl":"https://media.cgtrader.com/variants/7sq1vr7wd1qmb1m52df9oxun4qt7/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/PXL_20250921_011618742~2.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/la-fayette-class-frigate-class-inspired-battleship","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":null,"name":null,"is_native":false},{"id":129,"name":".3mf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6458602/fa5da39db8/la-fayette-class-frigate-class-inspired-battleship-3d-model-fa5da39db8.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"5823426","type":"listingItem","attributes":{"id":5823426,"title":"3D model Rc Boat 850 mm","price":3.0,"description":"\u003e Представляем3D-модель радиоуправляемой лодки\n\n\u003e Модельобладает аэродинамическим профилем для высокой скорости и устойчивости на воде.\n\n\u003e Длина: 850 мм\n\n\u003e Тип корпуса: моногул\n\n\n\u003e Introducing a 3D model of an RC boat\n\n\u003e The model has an aerodynamic profile for high speed and stability on the water.\n\n\u003e Length: 850 mm\n\n\u003e Housing type: monohull","imageAlt":"3D model Rc Boat 850 mm","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/3d-model-boat-900-mm","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/zPUma9UHhGVftQiWJvfuEmPK/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/%D0%A1%D0%BD%D0%B8%D0%BC%D0%BE%D0%BA%20%D1%8D%D0%BA%D1%80%D0%B0%D0%BD%D0%B0%202025-01-29%20153233.jpg","gridUrl":"https://media.cgtrader.com/variants/zPUma9UHhGVftQiWJvfuEmPK/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/%D0%A1%D0%BD%D0%B8%D0%BC%D0%BE%D0%BA%20%D1%8D%D0%BA%D1%80%D0%B0%D0%BD%D0%B0%202025-01-29%20153233.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/3d-model-boat-900-mm","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/5823426/9db88fb840/3d-model-rc-boat-850-mm-3d-model-9db88fb840.webp","saleOffDiscount":50,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"essentials"}},{"id":"3241711","type":"listingItem","attributes":{"id":3241711,"title":"FIN FOR BOAT","price":0.0,"description":"\nRudder for RC boat.\nSTL file. PLA material, 100% infill, layer height 0.2 mm, truss diameter 0.4 mm.","imageAlt":"FIN FOR BOAT rcboat 3D printable model","url":"https://www.cgtrader.com/free-3d-print-models/games-toys/other/fin-for-boat","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/D8L4LTEYVnxmGXQ4GUf8DRaT/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/FIN.jpg","gridUrl":"https://media.cgtrader.com/variants/D8L4LTEYVnxmGXQ4GUf8DRaT/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/FIN.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/games-toys/other/fin-for-boat","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"games-toys","subcategorySlug":"other","categoryTitle":"Games \u0026 Toys","subcategoryTitle":"Other","schemaImageUrl":"https://img-new.cgtrader.com/items/3241711/39f3fd74f4/fin-for-boat-3d-model-39f3fd74f4.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"3294504","type":"listingItem","attributes":{"id":3294504,"title":"Lobster Boat ","price":20.0,"description":"**Please read the whole article**\n\nThis is a 61cm or 2 feet long 3d model of a customizable lobster boat(customized for 3d printing). This contains only .stl file. So. you can 3d print the boat and use it in your RC projects. This boat has a total of 10 3d printable parts. 4 parts for the hull and four for the bridge. And remaining two parts are the rudder and rudder shaft. The maximum height of any part is less than 25cm. So, if you have a 3d printer that can print a maximum of 25cm on the Z axis, there will be no problem. I said that it is a customizable boat because it has no fixed position for batteries, servos, and other electronics. you can put them wherever you want and make a perfect balance. So, you can use any motor, servo, or battery that fits on the boat. The turbine shaft diameter is  3.2mm and the rudder shaft diameter is 2.2mm.\n\n\n**Some guide for 3d printing that you must follow:**\n\n- This boat hull is solid inside. So, to create a hollow structure, you must print this boat with zero(0%) infill and reset the wall thickness(according to your need, 2mm wall thickness is recomended) in your slicer software. This gives you the control to set your own custom hull thickness, though it is a little bit complicated. But you can get your preferred thickness. Print other parts with 100% infill. \n\nIf you find difficulties for this setting, I am attaching an extra zip file named  \"LobsterHull(100%infill)\". You can print the hull from here by just setting the infill rate 100%. It has a default hull thickness of 2mm.  \n\n- Minimize the layer height to ensure a good surface finish.\n \nPlease contact me if certain thing needs to be upgraded or added or you face any dificulties during the 3d printing.\nThank You.\nHappy 3d printing.\n","imageAlt":"Lobster Boat 3D print model","url":"https://www.cgtrader.com/3d-print-models/miniatures/vehicles/lobster-boat-6f8e28b7-1274-40ff-84b8-566a4fc6911c","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/s8SCQX6yhPEZ5oUMEdxwiAwa/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Lobster_Boat.jpg","gridUrl":"https://media.cgtrader.com/variants/s8SCQX6yhPEZ5oUMEdxwiAwa/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Lobster_Boat.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/miniatures/vehicles/lobster-boat-6f8e28b7-1274-40ff-84b8-566a4fc6911c","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"miniatures","subcategorySlug":"vehicles","categoryTitle":"Miniatures","subcategoryTitle":"Cars \u0026 Vehicles","schemaImageUrl":"https://img-new.cgtrader.com/items/3294504/6edcaa3916/lobster-boat-3d-model-6edcaa3916.webp","saleOffDiscount":70,"eligibleForSubscription":false,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"3996941","type":"listingItem","attributes":{"id":3996941,"title":"Steering Nozzle for 60mm jet unit","price":0.0,"description":"A little streering nozzle for 60mm jet unit I explane it in the video probly good for small boats or rc boats has two mounting points for a servo or a steering rod , the base has two more holes for mounting a reverse bucket which i will upload soon","imageAlt":null,"url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/mechanical-parts/steering-nozzle-for-60mm-jet-unit","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/bWJ2TMcacBUqSoj8JdN2s5Am/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/IMG_2747.jpg","gridUrl":"https://media.cgtrader.com/variants/bWJ2TMcacBUqSoj8JdN2s5Am/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/IMG_2747.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/mechanical-parts/steering-nozzle-for-60mm-jet-unit","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":12,"name":".obj","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"mechanical-parts","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Mechanical parts","schemaImageUrl":"https://img-new.cgtrader.com/items/3996941/68344834d6/steering-nozzle-for-60mm-jet-unit-3d-model-68344834d6.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6595668","type":"listingItem","attributes":{"id":6595668,"title":"rc car stand or rc truck or rc boat","price":3.0,"description":"rc car work stand you will need  6mm balls and a 1/4 x 20 x 2 inch bolt and nut","imageAlt":"3D print model rc car stand or rc truck or rc boat","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/rc-car-stand-or-rc-truck-or-rc-boat","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/zdfc98sgqocwkon8eoh0myv6ss5h/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/1000001891.jpg","gridUrl":"https://media.cgtrader.com/variants/zdfc98sgqocwkon8eoh0myv6ss5h/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/1000001891.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/rc-car-stand-or-rc-truck-or-rc-boat","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":null,"name":null,"is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/6595668/fe9b1a4bb2/rc-car-stand-or-rc-truck-or-rc-boat-3d-model-fe9b1a4bb2.webp","saleOffDiscount":50,"eligibleForSubscription":true,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":"essentials"}},{"id":"256739","type":"listingItem","attributes":{"id":256739,"title":"Tiny RC Tugboat","price":0.0,"description":"\u003cp\u003eThe original model is free at thingyverse but it was a solid piece, i made some changes to make it as a RC boat.\u003c/p\u003e","imageAlt":"Tiny RC Tugboat 3D print model","url":"https://www.cgtrader.com/free-3d-print-models/games-toys/other/tiny-rc-tugboat","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/ZYndgW5Db2U1yKmWAWZ5xaxk/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/tiny-rc-tugboat-3d-model-stl.jpg","gridUrl":"https://media.cgtrader.com/variants/ZYndgW5Db2U1yKmWAWZ5xaxk/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/tiny-rc-tugboat-3d-model-stl.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/games-toys/other/tiny-rc-tugboat","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"games-toys","subcategorySlug":"other","categoryTitle":"Games \u0026 Toys","subcategoryTitle":"Other","schemaImageUrl":"https://img-new.cgtrader.com/items/256739/efdaa6601d/tiny-rc-tugboat-3d-model-efdaa6601d.png","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"2462917","type":"listingItem","attributes":{"id":2462917,"title":"1to10 RC Boat Steering Stand","price":3.0,"description":"1/10 RC Boat Steering Stand\n\nI use it in my RC Boat Dolly, but you can use it on any Project.\n\nYou can Print it or build it the usal way with Wood or anything that you have.\n\n\nIt is designed it in Fusion 360. The Model is ready to print with a FDM / DLP 3D printer.\n\nIf further cad formats or changes are required, please write a short message. And if a different scale is required, I can gladly provide it. On the other hand, you can also do it yourself in the CAD program or in the slicer if you want :)\n\nLook at the other Scale Stuff at my Profile!\n","imageAlt":"3D print model 1to10 RC Boat Steering Stand","url":"https://www.cgtrader.com/3d-print-models/miniatures/vehicles/1to10-rc-boat-steering-stand","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/6vyni1bbnKxdL41cFqF4szhP/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Preview%201.jpg","gridUrl":"https://media.cgtrader.com/variants/6vyni1bbnKxdL41cFqF4szhP/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Preview%201.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/miniatures/vehicles/1to10-rc-boat-steering-stand","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":107,"name":".f3d","is_native":true},{"id":29,"name":".ige","is_native":false},{"id":51,"name":".stl","is_native":false}],"categorySlug":"miniatures","subcategorySlug":"vehicles","categoryTitle":"Miniatures","subcategoryTitle":"Cars \u0026 Vehicles","schemaImageUrl":"https://img-new.cgtrader.com/items/2462917/56353b52f6/1to10-rc-boat-steering-stand-3d-model-56353b52f6.webp","saleOffDiscount":50,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6449185","type":"listingItem","attributes":{"id":6449185,"title":"Fishing boat","price":0.0,"description":"This is a fishing boat 3D model created specifically for 3D printing.\nThe model is provided in STL format and split into 12 separate parts, making it easier to print and assemble. A display stand is also included.\n\nThe propeller is provided as a separate part, so in theory you could even turn this into a radio-controlled model.\n\nModel details:\n\nFormat: STL\n\nNumber of parts: 12\n\nBoat length: ~40 cm\n\nLargest part: ~26 cm\n\nWall thickness: 1.5 mm\n\nAssembly gaps: 0.5 mm\n\nImportant note:\n\nI don’t have personal experience with 3D printing. That’s why this model is available as a free download — so you can print it, test it, and give me feedback.\n\nYour input will help me fix issues and improve future models.\nHere are a few things I’d love to know from you:\n\nDid you face any problems during printing or assembly?\n\nAre the parts positioned relative to each other in a way that’s convenient for printing?\n\nIs the 1.5 mm wall thickness good for your printer setup?\n\nDo the overall dimensions (40 cm boat length, 26 cm largest part) work for you?\n\nIs the 0.5 mm gap at the joints sufficient?\n\nWould you like interior details to be added in future versions?\n\nHow do you plan to use the model — as a radio-controlled boat or as a decorative piece?\n\n\nThis tugboat is designed in a clean, stylized look and works great as a collectible, display model, or hobby project.\n\nEnjoy this free STL and please share your feedback — it will really help me improve my future 3D print designs!","imageAlt":"Fishing boat 3D print model","url":"https://www.cgtrader.com/free-3d-print-models/miniatures/vehicles/fishing-boat-5c0f5629-3c68-43fb-84e1-08a4cba59474","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/pz6t4btvn8w19vxgppw7vmitsz6g/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/fishing_boat_prev01.jpg","gridUrl":"https://media.cgtrader.com/variants/pz6t4btvn8w19vxgppw7vmitsz6g/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/fishing_boat_prev01.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/miniatures/vehicles/fishing-boat-5c0f5629-3c68-43fb-84e1-08a4cba59474","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"miniatures","subcategorySlug":"vehicles","categoryTitle":"Miniatures","subcategoryTitle":"Cars \u0026 Vehicles","schemaImageUrl":"https://img-new.cgtrader.com/items/6449185/929a7937b3/fishing-boat-3d-model-929a7937b3.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"4791828","type":"listingItem","attributes":{"id":4791828,"title":"RC Catamaran Yacht","price":10.0,"description":"**Overview**\n\n- A catamaran style RC yacht designed with 3d printing in mind. \n- Easy to print and minimize the support material needed.\n- All parts connect easily with keys.\n- Dimensions: 800mm x 360mm x 182mm\n\n**What You Need**\n- A 3d printer with build volume at least 250mm x 210mm x 210mm.\n- About 2.3kg of PLA or PETG filament.\n- 2 x RC boat driveshaft (200mm x 8mm).\n- 2 x A2212 brushless motor or any motor that’s smaller then 39mm \ndiameter.\n- 2 x Bidirectional ESCs.\n- 2s or 3s LiPo battery.\n- A receiver for your RC controller.\n- A RC controller with differential thrust settings. \n\n**What’s Included**\n- STL files compatible with most of slicer or 3d softwares.\n- 3MF files for Bambu Studio, all the printing parameter has been setup.\n- Installation instructions video: https://youtu.be/WdNshlzVaMU\n- PDF file for user guide: https://drive.google.com/file/d/1EJAyyY3V9yOA66cGQGYm3C3oApRyWUBZ/view?usp=sharing","imageAlt":"3D print model RC Catamaran Yacht","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/rc-catamaran-yacht","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/n3WHEBtrorjVqt4d6KScLPPZ/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/thumbnail.jpg","gridUrl":"https://media.cgtrader.com/variants/n3WHEBtrorjVqt4d6KScLPPZ/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/thumbnail.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/rc-catamaran-yacht","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":100,"name":".pdf","is_native":false},{"id":129,"name":".3mf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/4791828/0019572407/rc-catamaran-yacht-3d-model-0019572407.webp","saleOffDiscount":30,"eligibleForSubscription":false,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"4675377","type":"listingItem","attributes":{"id":4675377,"title":"Boat Pendant","price":0.0,"description":"**this is a free model from me and i hope its usefull for you**\n\n- Weight :\n\n9K gold = 3.5 gr\n\n10k gold = 3.7 gr\n\n14k gold = 4.1 gr\n\n18k gold = 4.9 gr\n\n22k gold = 5.7 gr\n\nsilver 925 = 3 gr\n\n- Dimensions :\n\n23 X 18 mm\n\n- Height :\n\n4.5 mm\n\nAll the required dimensions are available in the pictures and you can see them in the pictures.\n\n**You can also download the non-mesh file, and use all the parts of the model separately or apply your own changes to the file.**\n\n.Suitable for any 3d printing\n\n.Designed with All the principles of Goldsmithing\n\n.Designed without problems in the Manufacturing Process.\n\n**All Work includes a Warranty and you can contact me in case of any problems**","imageAlt":"simple-boat 3D print model Boat Pendant","url":"https://www.cgtrader.com/free-3d-print-models/jewelry/pendant/boat-pendant-bc299e40-3540-40c2-b007-64b016fd1f6c","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/h6Ro7psddpmz6tC41qcPGNia/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/BP%203.jpg","gridUrl":"https://media.cgtrader.com/variants/h6Ro7psddpmz6tC41qcPGNia/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/BP%203.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/jewelry/pendant/boat-pendant-bc299e40-3540-40c2-b007-64b016fd1f6c","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":13,"name":".3dm","is_native":false},{"id":12,"name":".obj","is_native":false}],"categorySlug":"jewelry","subcategorySlug":"pendant","categoryTitle":"Jewelry","subcategoryTitle":"Pendants","schemaImageUrl":"https://img-new.cgtrader.com/items/4675377/5ffd240365/boat-pendant-3d-model-5ffd240365.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"5699869","type":"listingItem","attributes":{"id":5699869,"title":"Hull for a high speed RC boat  designed for 3D printing","price":3.0,"description":"3D model of a high-speed boat hull designed for remote-controlled projects and 3D printing. The design focuses on functionality and ease of use. Formats: STL, OBJ, FBX, compatible with most 3D printers","imageAlt":"Hull for a high speed RC boat designed for 3D printing","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/hull-for-a-high-speed-rc-boat-designed-for-3d-printing","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/JZqJ96PFnhN3YLdnZoiuxb1J/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/CGtrader7.jpg","gridUrl":"https://media.cgtrader.com/variants/JZqJ96PFnhN3YLdnZoiuxb1J/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/CGtrader7.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/hull-for-a-high-speed-rc-boat-designed-for-3d-printing","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":5,"name":".fbx","is_native":false},{"id":215,"name":".png","is_native":false},{"id":12,"name":".obj","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/5699869/4648ecacf9/hull-for-a-high-speed-rc-boat-designed-for-3d-printing-3d-model-4648ecacf9.webp","saleOffDiscount":50,"eligibleForSubscription":true,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":"essentials"}},{"id":"6883330","type":"listingItem","attributes":{"id":6883330,"title":"MV Isle of Arran rc model building instructions","price":0.0,"description":"These are the free building instructions of the 3D printed RC model of the MV Isle of Arran that can be read before purchase to see what is involved in the construction of the model\n\nHere is the link to the model to purchase https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/mv-isle-of-arran-3d-printed-rc-working-ferry-ship","imageAlt":"MV Isle of Arran rc model building","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/mv-isle-of-arran-rc-model-building-instructions","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/5qq6j8xtsox35cnl3gcc2eza6ln4/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/20260118_121502.jpg","gridUrl":"https://media.cgtrader.com/variants/5qq6j8xtsox35cnl3gcc2eza6ln4/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/20260118_121502.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/mv-isle-of-arran-rc-model-building-instructions","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6883330/ad93a4fcb8/mv-isle-of-arran-rc-model-building-instructions-3d-model-ad93a4fcb8.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"2887139","type":"listingItem","attributes":{"id":2887139,"title":"RC boat 800 mm lentgh","price":18.99,"description":"Dimension RC boat model scale\n\n800 mm length over all \n130 mm height \n170 mm breadth","imageAlt":"RC boat 800 mm lentgh 3D print model","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/mechanical-parts/rc-boat-800-mm-lentgh","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/pj4f5UWVA3zRAA3Y4abQgXBn/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/untitled.10.jpg","gridUrl":"https://media.cgtrader.com/variants/pj4f5UWVA3zRAA3Y4abQgXBn/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/untitled.10.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/mechanical-parts/rc-boat-800-mm-lentgh","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":14,"name":".skp","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"mechanical-parts","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Mechanical parts","schemaImageUrl":"https://img-new.cgtrader.com/items/2887139/d336f465a5/rc-boat-800-mm-lentgh-3d-model-d336f465a5.webp","saleOffDiscount":30,"eligibleForSubscription":true,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":"premium"}},{"id":"7099494","type":"listingItem","attributes":{"id":7099494,"title":"Weathered Green Canoe Boat AAA","price":0.0,"description":"ighly Detailed Traditional Wooden Canoe – Game-Ready Maritime Asset\n\nComplete your aquatic, lakeside, or wilderness environments with this photorealistic, high-quality traditional wooden canoe. This versatile rowing boat prop is meticulously optimized and perfectly tailored for open-world survival games, outdoor simulation projects, sports fishing scenes, or rustic waterfront interior and exterior renders.\n\nThe model showcases high structural fidelity, featuring traditional webbed seats, supporting wooden thwarts (braces), detailed rivets along the gunwales, and a sleek hydrodynamic hull. The textures deliver a beautiful, lived-in outdoor aesthetic, capturing a weathered forest green finish with yellow chevron decals, realistic surface scuffs, light mud accumulation on the bottom, and natural wood grain finishes on the interior components.\n\nKey Features:\n\nAuthentic Waterfront Realism: High-resolution PBR textures capturing aged coated paint, matte plastics, polished interior wood grain, and realistic riverbank grime.\n\nPerfect Match: Designed to perfectly pair with standard oars, life jackets, or fishing gear props for complete environmental setups.\n\nOptimization: Clean low-poly topology specifically engineered for modern real-time game engines (Unreal Engine, Unity) and digital environments.\n\nPBR Workflow: Standard PBR texture maps included to guarantee natural material reactions under dynamic outdoor sun and water shaders.\n\nUV Unwrapped: Clean, professional, and non-overlapping UV layout to maximize texel density for sharp close-up views.\n\nTechnical Specifications:\n\nFile Formats: .obj\n\nGeometry: Polygonal\n\nTextures: Complete PBR Texture Set (Base Color, Roughness, Metallic, Normal, Ambient Occlusion)","imageAlt":"3D printable model Realistic Sports Fishing Canoe 2","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/other/realistic-sports-fishing-canoe-wilderness-survival-lakehouse","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/8a2ynozyyi345t2dslc13oq67dbn/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/cover.jpg","gridUrl":"https://media.cgtrader.com/variants/8a2ynozyyi345t2dslc13oq67dbn/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/cover.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/other/realistic-sports-fishing-canoe-wilderness-survival-lakehouse","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":12,"name":".obj","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"other","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Other","schemaImageUrl":"https://img-new.cgtrader.com/items/7099494/0a9ed30fc4/realistic-sports-fishing-canoe-wilderness-survival-lakehouse-3d-model-0a9ed30fc4.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"2888904","type":"listingItem","attributes":{"id":2888904,"title":"RC boat catamaran ","price":17.99,"description":"dimension LOA 950mm\n\npart product hull\nwith 2 \u0026 3 blade propeller","imageAlt":"3D print model RC boat catamaran","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/automotive/rc-boat-catamaran","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/NgZQDJ5q4eaWwrbyVJGS7Y11/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/untitled.80.jpg","gridUrl":"https://media.cgtrader.com/variants/NgZQDJ5q4eaWwrbyVJGS7Y11/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/untitled.80.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/automotive/rc-boat-catamaran","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":5,"name":".fbx","is_native":false},{"id":14,"name":".skp","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"automotive","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Automotive \u0026 Car parts","schemaImageUrl":"https://img-new.cgtrader.com/items/2888904/2659b9bb9a/rc-boat-catamaran-3d-model-2659b9bb9a.webp","saleOffDiscount":30,"eligibleForSubscription":true,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":"premium"}},{"id":"3401914","type":"listingItem","attributes":{"id":3401914,"title":"3D Printable RC Tire for projects","price":0.0,"description":"Introducing a simple 3d printing tire model for you to use in your projects\nBasic model","imageAlt":"3D Printable RC Tire for projects","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/mechanical-parts/3d-printable-rc-tire","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/GEcCEkjmeSqymGJ7SzHef1D3/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Tire.jpg","gridUrl":"https://media.cgtrader.com/variants/GEcCEkjmeSqymGJ7SzHef1D3/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Tire.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/mechanical-parts/3d-printable-rc-tire","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"mechanical-parts","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Mechanical parts","schemaImageUrl":"https://img-new.cgtrader.com/items/3401914/832cb8f6fe/3d-printable-rc-tire-for-projects-3d-model-832cb8f6fe.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"1930327","type":"listingItem","attributes":{"id":1930327,"title":"RC Boat Motor Shaft unit","price":5.0,"description":"RC Boat Motor Shaft Unit for 3d print.\nRc boat motor shaft unit for diy.\nAvailable for 6mm, 8mm, 10mm and 12mm shafts.\n\n","imageAlt":"3D print model RC Boat Motor Shaft unit","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/mechanical-parts/rc-boat-motor-shaft-unit","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/LTubnejoRYSuTSePcvUKmUsP/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/1.jpg","gridUrl":"https://media.cgtrader.com/variants/LTubnejoRYSuTSePcvUKmUsP/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/1.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/mechanical-parts/rc-boat-motor-shaft-unit","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":29,"name":".ige","is_native":false},{"id":113,"name":".CATProduct","is_native":false},{"id":12,"name":".obj","is_native":false},{"id":72,"name":".stp","is_native":false},{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"mechanical-parts","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Mechanical parts","schemaImageUrl":"https://img-new.cgtrader.com/items/1930327/93e51f69ca/rc-boat-motor-shaft-unit-3d-model-93e51f69ca.webp","saleOffDiscount":30,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"essentials"}},{"id":"5718873","type":"listingItem","attributes":{"id":5718873,"title":"Volkswagen Beetle 1963","price":0.0,"description":"\n3d model for printing in different scales. Suitable for resin printer and fdm printer. All files in .stl format.\nThe model includes •Body •Interior •Wheels •Tires •Windows and glass for headlights\none version provided with desirable wall thickness for scales from 1:8 to 1:24 for FDM printers and from 1:8 to 1:100 for resin printers.\nScale Model 1:8•1:10•1:12•1:16•1:18•1:24•1:25•1:28•1:32•1:35•1:43•1:64•1:100\n\nIf you need to another printable models message to me .\n\nLicense\n\nPrivate Use Only\nNon Commercial\nNo Derivatives\nNOTE: Do not under any circumstances share these files for free or commercially!","imageAlt":"Volkswagen Beetle 1963 3D print model","url":"https://www.cgtrader.com/free-3d-print-models/miniatures/vehicles/volkswagen-beetle-1963-a3f66bdc-04dc-42d3-9741-16038dc61a0a","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/YRYegY8RqT4CRwfME1JNDEAj/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Image_CG000000.jpg","gridUrl":"https://media.cgtrader.com/variants/YRYegY8RqT4CRwfME1JNDEAj/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Image_CG000000.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/miniatures/vehicles/volkswagen-beetle-1963-a3f66bdc-04dc-42d3-9741-16038dc61a0a","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":12,"name":".obj","is_native":false},{"id":21,"name":".blend","is_native":false},{"id":11,"name":".ma","is_native":false},{"id":5,"name":".fbx","is_native":false},{"id":17,"name":".max","is_native":false},{"id":51,"name":".stl","is_native":false}],"categorySlug":"miniatures","subcategorySlug":"vehicles","categoryTitle":"Miniatures","subcategoryTitle":"Cars \u0026 Vehicles","schemaImageUrl":"https://img-new.cgtrader.com/items/5718873/12a14fc478/volkswagen-beetle-1963-3d-model-12a14fc478.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"3474346","type":"listingItem","attributes":{"id":3474346,"title":"RC Boat YC Design 3D Printer Model ","price":4.99,"description":"RC Boat YC Design 3D Printer Model \nFully functional and complete RC boat model. You get 8 files for 8 parts of the boat. Designed to be FDM 3D printed. You can watch it made and assembled in 3D from the video link. It is designed to be very easy to assemble and even children can do it. You need to buy all electronics and other necessary parts yourself. Note: Production has been made. File types; ( Obj, İpt, iges, Xt, Step, Stl ) I am sharing all files. You can make any edits you want. Or just ask me for help in this matter.\nVideo Link:   https://youtu.be/o9C-2eQbf1o\n\nRC Boat YC Design 3D Printer Model overview\n\n1/1 scale, 185mm hull length. My boat weights 250gr, the weight depends on the electronics you choose. Motor choice: You can use up to 3660 size brushless motor.\nSelf righting works thanks to a flood chamber - a chamber that gets filled with water when the boat flips over. The side with the chamber gets heavier and flips your boat back. When driving forward again, all the water flows out. V8 engine are included in the STL files.\nFeel free to try it and leave feedback!\n(Note: For other models, please watch and like the videos on my channel) Youtube Link : https://youtube.com/channel/UCT1gC81v68ZhNLbTczfNHcg","imageAlt":"RC Boat YC Design 3D Printer Model","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/automotive/rc-boat-yc-design-3d-printer-model","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/FBBS8LGQ6Yjbpoen7QrTVZEr/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Rc%20Boat%20Assambly-0.jpg","gridUrl":"https://media.cgtrader.com/variants/FBBS8LGQ6Yjbpoen7QrTVZEr/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Rc%20Boat%20Assambly-0.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/automotive/rc-boat-yc-design-3d-printer-model","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":72,"name":".stp","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"automotive","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Automotive \u0026 Car parts","schemaImageUrl":"https://img-new.cgtrader.com/items/3474346/149abdeac7/rc-boat-yc-design-3d-printer-model-3d-model-149abdeac7.webp","saleOffDiscount":50,"eligibleForSubscription":true,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":"essentials"}},{"id":"2641903","type":"listingItem","attributes":{"id":2641903,"title":" beach boat","price":0.0,"description":"designed with real dimension boat\nDesigned Program: AutoCad","imageAlt":"3D print model beach boat","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/beach-boat","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/LBEga4n1AZTo44imRmRMR6Lv/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Drawing2-Temp0000.jpg","gridUrl":"https://media.cgtrader.com/variants/LBEga4n1AZTo44imRmRMR6Lv/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Drawing2-Temp0000.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/beach-boat","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":21,"name":".blend","is_native":true},{"id":4,"name":".dwg","is_native":false},{"id":5,"name":".fbx","is_native":false},{"id":12,"name":".obj","is_native":false},{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/2641903/a2a4ad7948/beach-boat-3d-model-a2a4ad7948.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"2888655","type":"listingItem","attributes":{"id":2888655,"title":"RC boat Propeller","price":16.99,"description":"diameter \n40 mm\n30 mm\n20 mm\n\ndesign 5 blade\nfor fix pitch propeller or CPP ptopeller\nRc boat","imageAlt":"3D printable model RC boat Propeller","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/automotive/rc-boat-propeller","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/uQBwkr9TLNZ2FwnGUVsyovAK/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/untitled.49.jpg","gridUrl":"https://media.cgtrader.com/variants/uQBwkr9TLNZ2FwnGUVsyovAK/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/untitled.49.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/automotive/rc-boat-propeller","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":5,"name":".fbx","is_native":false},{"id":12,"name":".obj","is_native":false},{"id":2,"name":".3ds","is_native":false},{"id":14,"name":".skp","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"automotive","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Automotive \u0026 Car parts","schemaImageUrl":"https://img-new.cgtrader.com/items/2888655/9749741907/rc-boat-propeller-3d-model-9749741907.webp","saleOffDiscount":30,"eligibleForSubscription":true,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":"premium"}},{"id":"7002253","type":"listingItem","attributes":{"id":7002253,"title":"Engineering Prototype Test Jig for RC Aircraft","price":0.0,"description":"**You  can support my models by downloading the other paid version with CAD NURBS files included:**\n\n$2 tip: Looking for the fully editable NURBS based master files? High-precicion original STEP native version available for professional and manufacturing version available here: https://www.cgtrader.com/3d-models/aircraft/military-aircraft/modern-warfare-uav-type-009-atomic-reaper-iges-included\n\n$5 tip: Looking for the fully editable NURBS based master files? High-precicion original STEP + IGES + X_B native version available for professional and manufacturing version available here: https://www.cgtrader.com/3d-models/aircraft/military-aircraft/modern-warfare-uav-type-009-atomic-reaper-iges-and-3mf-included\n\n--- \n\n# Fuselage Monocoque Test Jig for RC Aircraft Drag and Load using HX-711 Load Cell\n\nThis is a structural test fixture designed to help evaluate the stiffness and load-bearing performance of RC fuselage monocoque shells.\nAs RC builders experiment with thinner skins, composite layering, and lightweight internal frames, having a dedicated jig for repeatable testing becomes incredibly useful.\n\nThe jig provides a stable mounting base to test bending, torsional rigidity, compression strength, and skin-frame interactions. It is dimensioned to fit small to mid-size fuselage sections and can be scaled as needed.\n\nOriginally designed and printed on an Elegoo Neptune 4 Max, the geometry is optimized for large-format FDM printing with reinforced walls to prevent flex during loading. Perfect for experimental builders, engineering students, and anyone studying RC aircraft structures.\n\nTHIS PRODUCT IS A PROTOTYPE. Need Front/Aft neck modification to insert the fuselage safely\n\n--- \n\n**You  can support my models by downloading the other paid version with CAD NURBS files included:**\n\n$2 tip: Looking for the fully editable NURBS based master files? High-precicion original STEP native version available for professional and manufacturing version available here: https://www.cgtrader.com/3d-models/aircraft/military-aircraft/modern-warfare-uav-type-009-atomic-reaper-iges-included\n\n$5 tip: Looking for the fully editable NURBS based master files? High-precicion original STEP + IGES + X_B native version available for professional and manufacturing version available here: https://www.cgtrader.com/3d-models/aircraft/military-aircraft/modern-warfare-uav-type-009-atomic-reaper-iges-and-3mf-included","imageAlt":"3D printable model Engineering Prototype Test Jig for RC","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/engineering-prototype-test-jig-for-rc-aircraft","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/65u7i3ukj6m29958aiy79kpuwhjn/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/WhatsApp_Image_2025-11-28_at_5.25.50_PM.jpg","gridUrl":"https://media.cgtrader.com/variants/65u7i3ukj6m29958aiy79kpuwhjn/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/WhatsApp_Image_2025-11-28_at_5.25.50_PM.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/engineering-prototype-test-jig-for-rc-aircraft","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":129,"name":".3mf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/7002253/11bec73fcf/engineering-prototype-test-jig-for-rc-aircraft-3d-model-11bec73fcf.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"3986410","type":"listingItem","attributes":{"id":3986410,"title":"RC boat","price":5.99,"description":"I designed this RC boat in Sketchup and 3d printed it myself with the Ender 3-V2. The boat printing time is 9 hours and the summit takes 3 hours 30 minutes.I printed it with pla filament.\n\n","imageAlt":"other RC boat 3D print model","url":"https://www.cgtrader.com/3d-print-models/games-toys/other/rc-boat-dfb5eaa5-3598-43fc-bc2c-05e0100824b7","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/yKzs9b6ga7tQNciQ93jBHZn3/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Schermafbeelding%202022-09-12%20211834.jpg","gridUrl":"https://media.cgtrader.com/variants/yKzs9b6ga7tQNciQ93jBHZn3/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Schermafbeelding%202022-09-12%20211834.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/games-toys/other/rc-boat-dfb5eaa5-3598-43fc-bc2c-05e0100824b7","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":14,"name":".skp","is_native":true},{"id":51,"name":".stl","is_native":false}],"categorySlug":"games-toys","subcategorySlug":"other","categoryTitle":"Games \u0026 Toys","subcategoryTitle":"Other","schemaImageUrl":"https://img-new.cgtrader.com/items/3986410/7a384251ed/rc-boat-3d-model-7a384251ed.webp","saleOffDiscount":50,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"essentials"}},{"id":"857970","type":"listingItem","attributes":{"id":857970,"title":"Little boat","price":0.0,"description":"Little boat charm for jewelry. \n\nAdd enammel to it with the color you like the most!","imageAlt":"Little boat 3D print model","url":"https://www.cgtrader.com/free-3d-print-models/jewelry/pendant/little-302ffe77-b418-4ecd-97d7-95e9b951ce20","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/e6YTf1H9MmUR7YfiMfR8wdSJ/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/little-boat-3d-model-stl.jpg","gridUrl":"https://media.cgtrader.com/variants/e6YTf1H9MmUR7YfiMfR8wdSJ/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/little-boat-3d-model-stl.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/jewelry/pendant/little-302ffe77-b418-4ecd-97d7-95e9b951ce20","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"jewelry","subcategorySlug":"pendant","categoryTitle":"Jewelry","subcategoryTitle":"Pendants","schemaImageUrl":"https://img-new.cgtrader.com/items/857970/9a973ede7b/little-boat-3d-model-9a973ede7b.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"1932032","type":"listingItem","attributes":{"id":1932032,"title":"Rc Boat Shaft Unit for 8mm shafts","price":5.0,"description":"Rc Boat Shaft Unit for 8mm shafts.\nRC Boat Motor Shaft Unit for 3d print.\nRc boat motor shaft unit for diy.\nAvailable for 8mm shafts.\nMaterials: ABS or anodized aluminium.\n","imageAlt":"Rc Boat Shaft Unit for 8mm shafts 3D print model","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/mechanical-parts/rc-boat-shaft-unit-for-8mm-shafts","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/Qe6w6q4pDLABgDNpr5xvC6G4/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/1.jpg","gridUrl":"https://media.cgtrader.com/variants/Qe6w6q4pDLABgDNpr5xvC6G4/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/1.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/mechanical-parts/rc-boat-shaft-unit-for-8mm-shafts","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":17,"name":".max","is_native":true},{"id":113,"name":".CATProduct","is_native":false},{"id":5,"name":".fbx","is_native":false},{"id":29,"name":".ige","is_native":false},{"id":12,"name":".obj","is_native":false},{"id":51,"name":".stl","is_native":false},{"id":72,"name":".stp","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"mechanical-parts","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Mechanical parts","schemaImageUrl":"https://img-new.cgtrader.com/items/1932032/2d744dbaf4/rc-boat-shaft-unit-for-8mm-shafts-3d-model-2d744dbaf4.webp","saleOffDiscount":30,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"essentials"}},{"id":"5431889","type":"listingItem","attributes":{"id":5431889,"title":"Life boat crew","price":0.0,"description":"Life boat crew seven poses","imageAlt":"other Life boat crew 3D print model","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/life-boat-crew","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/6uiC9wKHu7ArfGQY5z4RJJnj/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/screenShot_lifecrew.jpg","gridUrl":"https://media.cgtrader.com/variants/6uiC9wKHu7ArfGQY5z4RJJnj/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/screenShot_lifecrew.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/life-boat-crew","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/5431889/0a8c282080/life-boat-crew-3d-model-0a8c282080.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"876475","type":"listingItem","attributes":{"id":876475,"title":"rc boat propeller is for torque","price":22.75,"description":"rc hoby rc boat 3d printer parts propeller 10cm x 5cm x 2cm \n\nTorque is for those who want power","imageAlt":"RC HOBYY BOAT PROPELLER 3D printable model","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/rc-hoby","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/sMQ3Qv1BwfRTdNBYS2PJaWcJ/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/rc-hobyy-boat-propeller-3d-model-stl.jpg","gridUrl":"https://media.cgtrader.com/variants/sMQ3Qv1BwfRTdNBYS2PJaWcJ/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/rc-hobyy-boat-propeller-3d-model-stl.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/rc-hoby","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":true}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/876475/1c4c7209d2/rc-boat-propeller-is-for-torque-3d-model-1c4c7209d2.webp","saleOffDiscount":70,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"premium"}},{"id":"1925524","type":"listingItem","attributes":{"id":1925524,"title":"Goldfish three bronze fish statues","price":0.0,"description":"**Fish**: Goldfish\n\n**File**:\n- OBJ (Merged Dynamesh Decimated ) \n- STL (/ Model is STL file format and Ready to 3D Printing )\n- ZTL  Zbrush2019\n\n Printer Test Model :Simplify3D\n\n Image : Zbrush,Keyshot\n\n\n\n","imageAlt":"3D printable model Goldfish three bronze fish statues","url":"https://www.cgtrader.com/free-3d-print-models/art/sculpture/goldfish-0de838f8-73ab-4702-a703-1034c4d8eb5e","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/T41rRpj81bGWLXf9o8SBEAMa/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/goldfish-3d-model-obj-mtl-stl-ztl.jpg","gridUrl":"https://media.cgtrader.com/variants/T41rRpj81bGWLXf9o8SBEAMa/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/goldfish-3d-model-obj-mtl-stl-ztl.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/art/sculpture/goldfish-0de838f8-73ab-4702-a703-1034c4d8eb5e","isCgtVerified":true,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":12,"name":".obj","is_native":false},{"id":55,"name":".ztl","is_native":false}],"categorySlug":"art","subcategorySlug":"sculpture","categoryTitle":"Art \u0026 Design","subcategoryTitle":"Sculptures","schemaImageUrl":"https://img-new.cgtrader.com/items/1925524/3c19e18abe/goldfish-three-bronze-fish-statues-3d-model-3c19e18abe.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"2981273","type":"listingItem","attributes":{"id":2981273,"title":"Basic Modern Catamaran Hull Model","price":6.43,"description":"A basic 3d model of a modern catamaran design shape to experiment around with","imageAlt":"efficiency Basic Modern Catamaran Hull Model","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/mechanical-parts/basic-modern-catamaran-hull-model","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/zbzhd6v28pcdcxkxu8u3fc2vur7g/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/basic-modern-catamaran-hull-model-3d-model-9606974c4a.jpg","gridUrl":"https://media.cgtrader.com/variants/zbzhd6v28pcdcxkxu8u3fc2vur7g/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/basic-modern-catamaran-hull-model-3d-model-9606974c4a.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/mechanical-parts/basic-modern-catamaran-hull-model","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":25,"name":".dae","is_native":false},{"id":12,"name":".obj","is_native":false},{"id":7,"name":".dxf","is_native":false},{"id":51,"name":".stl","is_native":false},{"id":59,"name":".sldprt","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"mechanical-parts","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Mechanical parts","schemaImageUrl":"https://img-new.cgtrader.com/items/2981273/9606974c4a/basic-modern-catamaran-hull-model-3d-model-9606974c4a.webp","saleOffDiscount":0,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"essentials"}},{"id":"5640368","type":"listingItem","attributes":{"id":5640368,"title":"Trailer Hitch for 4320 Expedition Cab - 1-10 RC Body Attachment","price":0.0,"description":"Trailer hitch designed specifically for the 4320 Expedition Cab.\n\nThe trailer hitches come in 6 different specs to suit the height of your trailer and the hitching distance from the Expedition Cab. .STEP files are also included in case you need to modify the design to further suit your needs.\n\n. 28mm distance with standard height\n. +10mm distance, -0mm height\n. +10mm distance, -10mm height\n. +20mm distance, -0mm height\n. +20mm distance, -10mm height\n. +20mm distance, -20mm height \n\n\nTo mount the trailer hitches, you will need to drill 2x 3mm holes, and will require 2x M3*20mm socket head screws and 2x M3 Lock nuts.","imageAlt":"3D printable model Trailer Hitch for 4320 Expedition Cab 4","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/trailer-hitch-for-4320-expedition-cab-1-10-rc-body-attachment","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/36ZrfsdjryR3VB6wV6QcD3WS/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/4320%20Expedition%20cab%20trailer%20hitch.jpg","gridUrl":"https://media.cgtrader.com/variants/36ZrfsdjryR3VB6wV6QcD3WS/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/4320%20Expedition%20cab%20trailer%20hitch.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/trailer-hitch-for-4320-expedition-cab-1-10-rc-body-attachment","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":null,"name":null,"is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"automotive","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Automotive \u0026 Car parts","schemaImageUrl":"https://img-new.cgtrader.com/items/5640368/aaaa3f0d90/trailer-hitch-for-4320-expedition-cab-1-10-rc-body-attachment-3d-model-aaaa3f0d90.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"3606707","type":"listingItem","attributes":{"id":3606707,"title":"Sportsmen Boat","price":18.0,"description":"This is a miniature version of famous sportsmen boat. This boat is designed and optimized for RC hobbyists. That's why I uploaded only the stl file for 3d printing. Some features of this boat are:\n\n- This boat boat is 61 cm or 2 feet long (you can resize or scale the boat while 3d printing).\n\n- Since it's a long boat, it was split into smaller parts. Maximum size of any part is less than 25 cm. So you can print the parts with small 3d printers.\n\n- The splitting part technique is very economic for 3d printing since it requires less support material.\n\n- It's hull thickness is 2mm ( for 61 cm).\n\n- 3d printing setting settings are simple.\n\n- Optimized for RC application.\n\n\n**Guideline for 3d printing**\n3d printing this boat is very simple and fun. Just print every part with 100% infill. That's it. Then just enjoy.\n\nContact me if you face any difficulties. Thank you.\n\n\n","imageAlt":"3D printable model Sportsmen Boat","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/automotive/sportsmen-boat","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/63hqrowe88vahfqua1a1y5n8keai/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/sportsmen-boat-3d-model-e7c99d74f9.jpg","gridUrl":"https://media.cgtrader.com/variants/63hqrowe88vahfqua1a1y5n8keai/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/sportsmen-boat-3d-model-e7c99d74f9.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/automotive/sportsmen-boat","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"automotive","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Automotive \u0026 Car parts","schemaImageUrl":"https://img-new.cgtrader.com/items/3606707/e7c99d74f9/sportsmen-boat-3d-model-e7c99d74f9.webp","saleOffDiscount":50,"eligibleForSubscription":false,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"5561564","type":"listingItem","attributes":{"id":5561564,"title":"Commer Cob Vintage British Car","price":0.0,"description":"Vintage british car modeled with high detail.\n\n**If you need help, guidance or custom 3D models don't hesitate to message me!**","imageAlt":"Commer Cob Vintage British Car 3D printable model","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/commer-cob-vintage-british-car","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/Wzz2jjxSYHsZSXwzZibrYsx2/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/image_2024-11-07_114727440.jpg","gridUrl":"https://media.cgtrader.com/variants/Wzz2jjxSYHsZSXwzZibrYsx2/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/image_2024-11-07_114727440.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/commer-cob-vintage-british-car","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"automotive","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Automotive \u0026 Car parts","schemaImageUrl":"https://img-new.cgtrader.com/items/5561564/4d44ae6711/commer-cob-vintage-british-car-3d-model-4d44ae6711.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"7033344","type":"listingItem","attributes":{"id":7033344,"title":"Orca Lobster Boat RC Model","price":25.0,"description":"I’m sure you’re here because you need a bigger boat! This is my 3D-modeled interpretation of Pat Tritle’s R/C plans for the lobster boat Orca from the movie “Jaws.” I made several changes to it with 3D printing in mind, and to satisfy the “well actually this boat had…” folks. I also used photos and still shots from the movie to incorporate details as well.\n\nI made this design in 2 separate scales: 1/14 and 1/24.\n\nMeasurements for the 1/14 version- L: 1091mm, W: 305mm, H: 827mm\n\nMeasurements for the 1/24 version- L: 620mm, W: 178mm, H: 483mm\n\nNote: This model was originally designed for the large 1/14 scale. The smaller 1/24 scale was scaled down from that model, making the wall thickness a little over 1mm. I did adjust the rudder and shaft hole sizes to fit my 4mm standard, however the smaller model will most likely need resin printing for some of the detail parts.\nI have included separate files splitting up the pieces over 250mm for smaller printers for the 1/14 scale. ONLY the pieces that required changing are in that folder. All the others are in the original 1/14 scale folder with the same numbers. This also means the split 1/14 pieces will have more supports than the original design. Unfortunately it's unavoidable without a complete redesign.\n\nEdit 1 (5/6/26): For some reason, when I scaled down the 1/14 model to 1/24, the piece \"Hull 1\" became low poly when I saved the mesh. I don't know why this happened, but the best workaround is to use the Hull 1 file from the 1/14 model, and then scale it down by .583 or 58.3% in your slicer.\n","imageAlt":"Orca Lobster Boat RC Model","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/orca-lobster-boat-rc-model","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/7mivm420wmkpk87k7v2uyg8hyfln/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/orca-lobster-boat-rc-model-3d-model-ad4a970a38.jpg","gridUrl":"https://media.cgtrader.com/variants/7mivm420wmkpk87k7v2uyg8hyfln/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/orca-lobster-boat-rc-model-3d-model-ad4a970a38.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/orca-lobster-boat-rc-model","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/7033344/ad4a970a38/orca-lobster-boat-rc-model-3d-model-ad4a970a38.webp","saleOffDiscount":0,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"premium"}},{"id":"6505455","type":"listingItem","attributes":{"id":6505455,"title":"RC CAR RIM 1-8 - BORBET T","price":0.0,"description":"This is a 3D model of some rc wheels, inspired on the Borbet T model wheels.\n\nExample images of the printed file on my rc car above.\n\nIt is a 1/8 car.","imageAlt":"3d 3D print model RC CAR RIM 1-8 - BORBET T","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/rc-car-rim-1-8-borbet-t","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/0mffm8zepecg45yj77owedbu711f/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Screenshot_1.jpg","gridUrl":"https://media.cgtrader.com/variants/0mffm8zepecg45yj77owedbu711f/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Screenshot_1.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/rc-car-rim-1-8-borbet-t","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":null,"name":null,"is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"automotive","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Automotive \u0026 Car parts","schemaImageUrl":"https://img-new.cgtrader.com/items/6505455/a2906567b9/rc-car-rim-1-8-borbet-t-3d-model-a2906567b9.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"3986369","type":"listingItem","attributes":{"id":3986369,"title":"RC boat","price":5.0,"description":"RC boat for 3D printing. I designed this boat in Sketchup and also 3D printed it and made it on a remote control. ","imageAlt":"3D print model RC boat","url":"https://www.cgtrader.com/3d-print-models/games-toys/other/rc-boat-452d512e-bd8b-4c78-b1cf-3758f4306b1c","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/MKWBFpWo7c9UWWZUL1Rmp4j2/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/20220912_212337.jpg","gridUrl":"https://media.cgtrader.com/variants/MKWBFpWo7c9UWWZUL1Rmp4j2/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/20220912_212337.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/games-toys/other/rc-boat-452d512e-bd8b-4c78-b1cf-3758f4306b1c","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":14,"name":".skp","is_native":true},{"id":51,"name":".stl","is_native":false}],"categorySlug":"games-toys","subcategorySlug":"other","categoryTitle":"Games \u0026 Toys","subcategoryTitle":"Other","schemaImageUrl":"https://img-new.cgtrader.com/items/3986369/de77a19413/rc-boat-3d-model-de77a19413.webp","saleOffDiscount":50,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"essentials"}},{"id":"4945879","type":"listingItem","attributes":{"id":4945879,"title":"Rc Rally Lights","price":0.0,"description":"**All files in RAR file**\n\nRally inspired Lights, if you have any suggestions or issues drop me a message!\n\nPrint settings:\n\n-Filament material: PETG / ABS / PLA\n\n-Infill: 42% (Monotonic)\n\n-Supports: Yes (only for the light bar, and not for the bucket lights)\n\n-Resolution: 0.4 nozzle 0.2 layer height\n\n-Wall Count/Perimeters: 4","imageAlt":null,"url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/rc-rally-lights","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/9e1gvejwitFuMJnB1VE3vi3L/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Preview1.jpg","gridUrl":"https://media.cgtrader.com/variants/9e1gvejwitFuMJnB1VE3vi3L/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Preview1.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/rc-rally-lights","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"automotive","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Automotive \u0026 Car parts","schemaImageUrl":"https://img-new.cgtrader.com/items/4945879/c4feb6a4ba/rc-rally-lights-3d-model-c4feb6a4ba.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"3893886","type":"listingItem","attributes":{"id":3893886,"title":"Inflatable Boat","price":3.0,"description":"It is a 61 cm long inflatable boat CAD model for 3d printing. You can use this model for DIY or hobby projects. Since most 3d printers can't print more than 25 cm, the boat is sectioned into 3 different parts so that each part becomes less than 25 cm. This parting also reduces the support material. But if you need the whole boat in one part, just inbox me. If you need any kind of moderation in the design, you can ask me.\n\n**Description:**\n\n- Length 61 cm.\n\n- Width 21 cm.\n\n- Hull thickness 2 mm.\n\n- Tube is hollow inside.\n\n**3d Printing Guideline:**\nJust print all the parts with 100% infill. Since the tube hollow inside you don't need to worry about material wastage.\n\nThank You.\nHappy 3d Printing.","imageAlt":"3D print model Inflatable Boat","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/mechanical-parts/inflatable-boat-aded5a3f-17b8-4b09-8d3a-74fb53e8c26e","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/h35kxczpkdvrx0t9kxd68ddihcng/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/inflatable-boat-3d-model-0b471c8e97.jpg","gridUrl":"https://media.cgtrader.com/variants/h35kxczpkdvrx0t9kxd68ddihcng/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/inflatable-boat-3d-model-0b471c8e97.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/mechanical-parts/inflatable-boat-aded5a3f-17b8-4b09-8d3a-74fb53e8c26e","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"mechanical-parts","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Mechanical parts","schemaImageUrl":"https://img-new.cgtrader.com/items/3893886/0b471c8e97/inflatable-boat-3d-model-0b471c8e97.webp","saleOffDiscount":50,"eligibleForSubscription":false,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6044784","type":"listingItem","attributes":{"id":6044784,"title":"RC Car 65T Gear","price":0.0,"description":"65T Gear For rc cars\n\nFor more information\nwww.3dustam.com","imageAlt":"RC Car 65T Gear 3D print model","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/rc-car-65t-gear","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/gi7gpdqsxl3lk9oh4mx3xwep64qr/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Preview1.jpg","gridUrl":"https://media.cgtrader.com/variants/gi7gpdqsxl3lk9oh4mx3xwep64qr/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Preview1.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/rc-car-65t-gear","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6044784/119591c8b3/rc-car-65t-gear-3d-model-119591c8b3.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6650702","type":"listingItem","attributes":{"id":6650702,"title":"MV Europic Ferry RC Ship Boat","price":60.0,"description":"These stl files enable you to build a fully working scale model of the 1967 lorry and car ferry named MV Europic Ferry.  The files are scaled to 1/96th which will create a model 1370mm long and 200mm wide.  They can be reduced in size to build a model at 1/144th scale or increased if you wish to make something rather larger!  Obviously the limit is the size of your 3d printer.  This was designed for a printer with a base plate of 220mm, although I printed it on a Creality K1 Max .   \n\nI have recently added a revised superstructure that is slightly thicker to work with printers that don't cope with parts being too thin.\n\nMV Europic Ferry was built to cross the North Sea in 1967, carrying mainly lorries and some cars from Harwich to Rotterdam.  In 1982 she was requistioned by the British goverment and sent as a transport ship to the Falklands carrying a deck cargo of field guns and helicopters and some troops in make shift accomodation.  Her large flat deck was used to repair helicopters up to the size of a Chinook (This would be an interesting era to model!)\nLater she served on a run across the Irish Sea to Larne before being sold to a Cypriot company that built a large superstructure over the upper deck and used her in the Mediterranean.\n\nThe model represents her earlier career up to 1982.  \n\nShe is printed in PETG filament in her entirety and perfomrs extremely well as a RC model, very manouverable and very stable.  She is a different and unusual subject and has gained great interest at the model boating pond.  Model construction is not difficult \n\nI welcome contact through the cgtrader platform... any questions will be answered quickly and I offer support through the printing process if required!  \n\nHere is a link to the free instruction booklet available so that you can see what is involved in building the model before you purchase  https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/europic-ferry-radio-controlled-model-ship-building-instructions","imageAlt":"MV Europic Ferry RC Ship Boat","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/mv-europic-ferry-rc-ship-boat","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/xvua33jgh6dwl9jazf494briwkbd/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/20251130_111418.jpg","gridUrl":"https://media.cgtrader.com/variants/xvua33jgh6dwl9jazf494briwkbd/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/20251130_111418.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/mv-europic-ferry-rc-ship-boat","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":100,"name":".pdf","is_native":false},{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6650702/4d1e8ace18/mv-europic-ferry-rc-ship-boat-3d-model-4d1e8ace18.webp","saleOffDiscount":50,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6482048","type":"listingItem","attributes":{"id":6482048,"title":"Boat 3D Model Realistic Decorative Vessel","price":0.0,"description":"A detailed 3D model of a boat, perfect for 3D printing, home decor, nautical displays, and digital art projects.\nThis realistic model captures the shape and features of a boat, making it ideal as a decorative piece, collectible, or digital asset for creative projects.\nThe model is fully scalable to any size, suitable for small tabletop models, medium display pieces, or larger statement sculptures.\n\nPerfect for:\n\nHome and office decoration\n\nNautical-themed displays and collectibles\n\nDigital art, animation, and game design\n\n3D printing and creative props","imageAlt":"Boat 3D Model Realistic Decorative Vessel","url":"https://www.cgtrader.com/free-3d-print-models/art/sculpture/boat-3d-model-realistic-decorative-vessel-6d13e20d-731c-45a7-b58d-e47855310cc7","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/967jje5tjjayacnv2tvlc8dim8rx/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Sin%20t%C3%ADtulo2.jpg","gridUrl":"https://media.cgtrader.com/variants/967jje5tjjayacnv2tvlc8dim8rx/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Sin%20t%C3%ADtulo2.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/art/sculpture/boat-3d-model-realistic-decorative-vessel-6d13e20d-731c-45a7-b58d-e47855310cc7","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":12,"name":".obj","is_native":false}],"categorySlug":"art","subcategorySlug":"sculpture","categoryTitle":"Art \u0026 Design","subcategoryTitle":"Sculptures","schemaImageUrl":"https://img-new.cgtrader.com/items/6482048/8da0a6e96f/boat-3d-model-realistic-decorative-vessel-3d-model-8da0a6e96f.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"4306349","type":"listingItem","attributes":{"id":4306349,"title":"RC Austal Guardian class offshore patrol boat","price":39.0,"description":"A detailed scale model of the Australian shipbuilder Austal's Guardian class offshore patrol boat in scale: 1:38.4, intended for remote control. Total length of the printed ship is 1028 mm.\n\nThe model is designed from ground up to be easy and durable to print, with care taken to everything from layer orientations, material saving and support minimization. In fact, not a single part requires support, but is designed in a way that makes it printable as it is. Less fuss, less material waste, better surface finish. For example, all railings are printed laying down, giving them superior strength and flexibility. The same goes with mast, antennas and other details.\n\nAll parts are designed to fit on a standard  210x210 print bed.\n\nPowered by twin 550 size motors, brushed or brushess, a complete list of RC equipment needed is in the included manual.\n\nhttps://youtu.be/NHN5fQVOJaI","imageAlt":"3D print model RC Austal Guardian class offshore patrol","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/austal-guardian-class-offshore-patrol-boat","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/s054bn2p640u87usg8q0nsdlptes/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Assembly_1_-2-_2022-Nov-08_10-37-11PM-000_CustomizedView26120302398.jpg","gridUrl":"https://media.cgtrader.com/variants/s054bn2p640u87usg8q0nsdlptes/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Assembly_1_-2-_2022-Nov-08_10-37-11PM-000_CustomizedView26120302398.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/austal-guardian-class-offshore-patrol-boat","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/4306349/f858abf60f/rc-austal-guardian-class-offshore-patrol-boat-3d-model-f858abf60f.webp","saleOffDiscount":70,"eligibleForSubscription":false,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6356628","type":"listingItem","attributes":{"id":6356628,"title":"QuicFlip RC Self-Righting Arm for 2WD Racing Buggy Cars","price":0.0,"description":"\u003e Tired of walking around the track more than actually driving?\n\nThis high-speed servo-driven flipper arm is your pit crew in a print file. Designed for 1:10 2WD off-road buggies, it lets you flip your car back onto its wheels with just the tap of a button on your third channel—no more long walks mid-race. Featuring quick-release technology for easy maintenance, a premium fit for Yokomo YZ-2 and Team Associated RC10B7 (and potentially more), and optimized for 7.4V operation for snappy, consistent flipping action. Whether you’re bashing or racing, this is the upgrade that keeps you in the driver’s stand and in the race.\n\nIncludes detailed assembly instructions, STL files for all components, and support if you run into issues. Parts are designed for easy reprinting and quick replacement, so you can stay on track with minimal downtime.\n\nWhether you’re bashing at the local park or racing competitively, this upgrade saves time, keeps you driving, and adds a whole new layer of fun to your RC experience.","imageAlt":"3D printable model QuicFlip RC Self-Righting Arm for 2WD 2","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/quicflip-rc-self-righting-arm-for-2wd-racing-buggy-cars","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/yvywmxns3m11k9dgv813bf8gj4y9/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Finished_Image.jpg","gridUrl":"https://media.cgtrader.com/variants/yvywmxns3m11k9dgv813bf8gj4y9/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Finished_Image.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/quicflip-rc-self-righting-arm-for-2wd-racing-buggy-cars","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":100,"name":".pdf","is_native":false},{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6356628/d095cf891e/quicflip-rc-self-righting-arm-for-2wd-racing-buggy-cars-3d-model-d095cf891e.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"5198957","type":"listingItem","attributes":{"id":5198957,"title":"RC CAPE CLASS PATROL BOAT","price":90.0,"description":"This boat is a replica of the Austal Cape Class Patrol Boat, Australia.\n\nScale : 1:48 |\nHull length : 1218 mm |\nWidth : 228 mm |\nHeight : 394 mm (421 mm with Stand / Support) |\nDual Motor : 550 brushed motor |\nEsc : 80A |\nSide Thruster : Yes (180 dc motor) |\nEsc Thurster : 20A |\nServo : MG996R |\n\nN.B.\nThe list of electronic devices above are the devices I use on this boat, if you have experience in motors and esc you can upgrade to better ones\n\n-\n\nThis is my third boat model, I tried to redesign it for 3D printing needs to be as detailed as possible and print well. some small details will be updated at a later time.\n\nYou will be guided through the pictures and also the List of materials.\n\nThe writing on this boat is fiction, there is no boat using this name and number\n\nVideo :\nhttps://www.instagram.com/reel/C3tEBVBSZKi/?utm_source=ig_web_copy_link\u0026igsh=MzRlODBiNWFlZA==\n\nhttps://youtube.com/shorts/2M85lCGk5Ok?feature=share\n\n3D PRINTING SETTINGS\nQuick setting available in the file\n\nbuild volume : 235x235x250\n\nif your default printer setting is 220x220x250, we can change it in manage printer - machine settings, change the value from 220x220x250 to 235x235x250","imageAlt":"RC CAPE CLASS PATROL BOAT vehicle 3D printable model","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/rc-cape-class-patrol-boat-d92dfe3c-9caf-4ea7-be12-44721b03dd38","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/MM6ebcTcZXiVaEq8kj8ZnqSi/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Cape%20Class%20Patrol%20Boat.jpg","gridUrl":"https://media.cgtrader.com/variants/MM6ebcTcZXiVaEq8kj8ZnqSi/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Cape%20Class%20Patrol%20Boat.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/rc-cape-class-patrol-boat-d92dfe3c-9caf-4ea7-be12-44721b03dd38","isCgtVerified":true,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":129,"name":".3mf","is_native":false},{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/5198957/2c99478acf/rc-cape-class-patrol-boat-3d-model-2c99478acf.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"7040494","type":"listingItem","attributes":{"id":7040494,"title":"Instruction Booklets","price":0.0,"description":"These files are the instruction booklets for each of the models that I offer. I will keep it updated as new models come out. Feel free to take a look if you're interested in one of my designs!","imageAlt":"Instruction Booklets","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/instruction-booklets","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/t78o9ojlz170hzhnzl0m8zautnc6/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Screenshot%202026-05-06%20095521.jpg","gridUrl":"https://media.cgtrader.com/variants/t78o9ojlz170hzhnzl0m8zautnc6/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Screenshot%202026-05-06%20095521.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/instruction-booklets","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/7040494/0c06c8adc8/instruction-booklets-3d-model-0c06c8adc8.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"5219131","type":"listingItem","attributes":{"id":5219131,"title":"1 16 RC Japanese Fishing Boat","price":50.0,"description":"The US Army’s 41st Division occupied the Japanese Naval District at Kure in the months immediately after Japan’s surrender in 1945. US soldiers monitored the civilian disposal of weapons stored in the Kure armories . Local wooden Japanese fishing boats were loaded with small arms/ammunition and dumped into the surrounding waterways. The stl files represent a typical 1940s vintage wooden net trawler that was “specially made” to clear the sea mines that were laid around Japan during the war. This radio controlled model boat is based on the “Shinsei Maru” from Toho’s Oscar winning 2023 movie “Godzilla Minus One”. \n\nThe boat is estimated to be 15 meters long and at 1:16 scale, the model dimensions are 925mm x 209mm x 451mm.\nModel features include scribed hull planking, removable cabins for access to the radio control equipment, scale details like the mines and machine gun used in the movie. Cabin doors slide open and shut. The motor mount can accommodate a RS-550 type brushed motor or brushless motor. Four figures representing the characters in the movie are included.\nThe model can be painted to represent either a vintage Japanese fishing boat or the Shinsei Maru from the Godzilla movie. Stencils are provided for the Japanese characters on the model’s hull. \n\nGodzilla is a Toho trademark\n","imageAlt":"3D print model 1 16 RC Japanese Fishing Boat","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/1-16-rc-japanese-fishing-boat","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/ZN6ATYHdh9cRKdYLTMcCmnVL/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Slide_0.jpg","gridUrl":"https://media.cgtrader.com/variants/ZN6ATYHdh9cRKdYLTMcCmnVL/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Slide_0.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/1-16-rc-japanese-fishing-boat","isCgtVerified":true,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":129,"name":".3mf","is_native":false},{"id":100,"name":".pdf","is_native":false},{"id":21,"name":".blend","is_native":false},{"id":7,"name":".dxf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/5219131/a3ef7e84dd/1-16-rc-japanese-fishing-boat-3d-model-a3ef7e84dd.webp","saleOffDiscount":50,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"4069216","type":"listingItem","attributes":{"id":4069216,"title":"Assembly Manual - RC BUGATTI 100P RACER SPIRIT","price":0.0,"description":"Before trying to build this airplane, you'll want to know how to build it and what you'll need first.\n\nThe shape of each part and the assembly method and sequence are indicated in the assembly manual.\n\nYou can also check photos and print conditions for assembly reference.\n\nContact\n\nfacebook : https://www.facebook.com/profile.php?id=100078820971516\nYoutube : https://youtu.be/fnxQQgVu3Gw\n\n3D PRINTING SETTINGS\nDetailed information is included in the manual file.\n\nPrint the test part with reference to the parameters presented. The actual wall thickness that should be printed is\n\nLW-PLA / VASE MODE(Spiralize outer contour)\nBottom layer : 2 / Top Layer : 0\nWing_L04 -\u003e 1 Wall Thickness 0.5mm","imageAlt":"Assembly Manual - RC BUGATTI 100P RACER 3D print model","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/assembly-manual-bugatti-100p-racer-spirit","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/j2m2AMq8vU13Mtc6RcHBnYx7/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/5b2d900df85cd026030bd6ee3cf43464.jpg","gridUrl":"https://media.cgtrader.com/variants/j2m2AMq8vU13Mtc6RcHBnYx7/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/5b2d900df85cd026030bd6ee3cf43464.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/assembly-manual-bugatti-100p-racer-spirit","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":100,"name":".pdf","is_native":false},{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/4069216/0d72ca7e53/assembly-manual-rc-bugatti-100p-racer-spirit-3d-model-0d72ca7e53.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"4053913","type":"listingItem","attributes":{"id":4053913,"title":"M-Jet 35 - 3D Printable Jet Pump for RC Boats","price":40.0,"description":"Join the official M-Jet facebook group! https://www.facebook.com/groups/623045356071128\n\n**This is not a physical product. After purchase, you can download computer files which you can use to manufacture your own parts on a 3D printer.**\n\n**What you get:**\n- STL files for all 3D printed parts of the pump\n- PDF drawings for all handmade parts of the pump\n- STL and STEP files for the impeller\n- STL, STEP and DXF files for the intake grate and ride plate\n\n**There is no hull included!** Instead, you can download one of the FREE official compatible hulls:\n\n1) Ragnarok: https://www.cgtrader.com/free-3d-print-models/hobby-diy/other/ragnarok-3d-printable-rc-jetsprint-boat\n\n2) Valkyrie RC Jetski: https://www.cgtrader.com/free-3d-print-models/hobby-diy/other/valkyrie-3d-printable-rc-jetski\n\n3) 4G Hull: https://www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/4g-sprint-hull-for-rc-boats-2022\n\nThe M-Jet 35 is also compatible with various hulls designed by the community:\n\n1) Bash Jet, Speed Jet and Cruz Jet by VASSA (search on cults3d, link is not allowed by CGTrader)\n\n**COMPLETE PDF MANUAL**: \nhttps://drive.google.com/file/d/1d3b9momWcgAeUAn5o1v0-QZcIMYy4U90/view?usp=sharing\n\nIncludes **hull requirements, print settings, assembly and installation guide, motor choice.**\n\n**PART LIST:**\nhttps://docs.google.com/spreadsheets/d/1od-H8H67PB-mB2iy3vTsqKm03mRA3lls/edit?usp=sharing\u0026ouid=114321917833490201706\u0026rtpof=true\u0026sd=true\n\n**HARDWARE KIT BY RCPRINTER:**\nhttps://rcprinter.com/products/m-jet-35-pump-build-kits\n\nM-Jet 35 is the result of one year long development. It is the follow up after my successful M-Jet 30 project. It is improved in all areas and delivers the best performance I have achieved to date.\n\nDuring the M-Jet 35 development, over 100 design combinations were tested and measured. Thrust, exit velocity, efficiency, power consumption and output power were measured and compared to achieve the best result possible. \n\nFull playlist showing the development: https://www.youtube.com/playlist?list=PLiFskGz_svvQjxSCElF1c1PSJKaHq8vae\n\nThe M-Jet 35 features two original and innovative design elements I have never seen used before:\n\nThe **M-Jet single blade impeller** greatly improves efficiency, while maintaining the superior 2-stage priming behavior, and is fully balanced by built-in counterweight. \n\nThe **M-Jet 4-path nozzle** dramatically shortens the pump assembly, improves durability, raises efficiency thanks to ultrashort flow path, and brings in nearly zero backlash steering control.\n\nUpdate 31.10.2022: A more detailed description of the M3 brass threaded inserts was added to the part list and manual.\n\nUpdate 10.2.2023: A folder \"Mods for M-Jet 35\" was added to the files. A modified second stage for a 5x10x4 bearing size was added into the folder.\n\nUpdate 12.6.2023: A new second stage \"topspeed mod\" was added into the mods folder. It contains modified second stages with decreased outlet diameters, ranging from -1mm to -4mm (calculated from a circle that has the same area as 4 M-Jet 35's nozzles combined).\n\nUpdate 16.6.2023: The \"topspeed mod\" was removed, because testing showed worse performance. Thanks Connie Stankovich for performing the test!\n\nUpdate 18.8.2023: A new folder \"tolerance_mods\" was added into the mods folder. It contains modified Housing and Second stage with increased bearing and seal slot dimensions, which will help if your prints are too tight.\n\nUpdate 16.9.2023: A new \"O-ring_adaptor_instead_of_oil_seal\" was added into the mods folder. The O-ring_adaptor_5x9x2 can be used, if you are not able to purchase the regular oil seals. You can glue this adaptor into the M-Jet 35's housing and insert an 5x9x2 O-ring. However, keep in mind that the oil seal is a much better solution.\n\nUpdate 30.9.2023: Some notes about the FPM / FKM rotary shaft seal and the soft O-ring were added into the manual and part list.\n\nUpdate 12.12.2023: A loading grate by Ryan Frair was added to the mods folder. The loader helps to push water into upper section of the intake. It showed improvement in top speed from 56 kph to 60 kph. Thank you very much for sharing!\n\nUpdate 19.12.2023: A finned ride plate and custom turn fins by Ryan Frair were added to the mods folder. Thanks for sharing! Furthermore, a +25° trim \"backflip nozzle\" was added into the mods folder - the first full successful backflip was performed with Valkyrie by Chris Leech.\n\nUpdate 27.1.2024: The motor KV chart was updated with stronger requirements for the ESC when using a 40xx size motor. The previous ESC rating suggestions turned out to be not safe enough - I apologize for the mistake.\n\nUpdate 31.03.2024: A STEP file of the housing assembly, which includes most parts of the M-Jet 35 except for the pump stages, was added.\n\nUpdate 25.04.2024: The D-slot in the plastic impeller version was extended to avoid stripping out when transferring torque. This requires you to extend the flat spot on your driveshaft by 10mm from 15mm to 25mm. Note about this has been added into the manual.\n\nUpdate 10.07.2024: A intake grate mod which uses 1.8mm stainless steel rods by Eric was added into the mods folder - thanks for your input!\n\nUpdate 19.07.2024: A modified motor mount with ESC mount, compatible with upcoming Bashjet by Vassa, was added into the mods folder. Thanks for your work.\n\nUpdate 12.08.2024: New nozzle options +7, +12, +20 were added. Folders were lightly reorganized. New ride plates ported from Valkyrie were added.\n\nUpdate 30.08.2024: The Handmade parts drawing was updated to inform that the plastic impeller needs a longer flat spot on the shaft.\n\nUpdate 30.11.2024: Multiple sections of the manual were updated to show more up-to-date information. No other files were changed.\n\nUpdate 04.12.2024: A new nozzle option +2.5 was added.\n\nUpdate 30.01.2025: A note about driveshaft length when using motors with long motor shaft was added into the m-jet_35_handmade_parts drawing. Thanks Matt for the suggestion.\n\nUpdate 03.05.2025: A dual cooling mod by Bruce has been uploaded into the Mods folder, thanks for sharing!\n\nUpdate 12.05.2025 A new TPU shaft seal design by Fabien was added into the Mods folder. This can be used instead of the regular oil seal. Full watertight seal was achieved in a test run.","imageAlt":"pump M-Jet 35 - 3D Printable Jet Pump for RC Boats","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/m-jet-35-3d-printable-jet-pump-for-rc-boats","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/R2fbTCZzc4D1ztf7uhPK4HP1/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/02.jpg","gridUrl":"https://media.cgtrader.com/variants/R2fbTCZzc4D1ztf7uhPK4HP1/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/02.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/m-jet-35-3d-printable-jet-pump-for-rc-boats","isCgtVerified":true,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":100,"name":".pdf","is_native":false},{"id":51,"name":".stl","is_native":false},{"id":7,"name":".dxf","is_native":false},{"id":129,"name":".3mf","is_native":false},{"id":216,"name":".jpg","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/4053913/fe842cd563/m-jet-35-3d-printable-jet-pump-for-rc-boats-3d-model-fe842cd563.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6505440","type":"listingItem","attributes":{"id":6505440,"title":"ABSIMA RC BATTERY CASE WITH COVER","price":0.0,"description":"This is a case for a solid ABSIMA battery that i have on my RC car.\n\nIt's for the 4140031 - Absima Lipo Battery 11.1V 6200mAh 60C XT90\n\nDimensions of the battery: 138x46x35mm \nDimensions of the case without cover: 145x63x54mm\nDimensions of the case with cover: 145x68x54mm\nPrinted and tested on my rc car, imagens for example above.","imageAlt":"3D print model ABSIMA RC BATTERY CASE WITH","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/absima-rc-battery-case-with-cover","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/513x4i4x44ggewmqkmb43dxjll1u/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Screenshot_9.jpg","gridUrl":"https://media.cgtrader.com/variants/513x4i4x44ggewmqkmb43dxjll1u/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Screenshot_9.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/absima-rc-battery-case-with-cover","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"automotive","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Automotive \u0026 Car parts","schemaImageUrl":"https://img-new.cgtrader.com/items/6505440/9c02155307/absima-rc-battery-case-with-cover-3d-model-9c02155307.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"2941615","type":"listingItem","attributes":{"id":2941615,"title":"M-Jet Supersprint - 3D Printable RC Jetboat Model","price":34.0,"description":"Join the official M-Jet facebook group! https://www.facebook.com/groups/623045356071128\n\n**PDF MANUAL FOR SUPERSPRINT:**\nhttps://drive.google.com/drive/folders/1f-epKNBlcqGcuJU5rGvYQleL7ayPnrRe?usp=sharing\n\n**SUPERSPRINT HARDWARE KIT** by RCPrinter:\nhttps://rcprinter.com/products/m-jet-supersprint-v1-0-build-kits\n\nSupersprint is 400mm long, resulting in scale 1/10. Designed for fun and ease of build, but at the same time the newest and brings all important M-Jet features developed over time. Has full documentation, build video and manual.\n\nThis file package contains:\nOriginal M-Jet Sprint\n\u0026\nSupersprint\n\nSupersprint is the newest update, which brings the most recent M-Jet features developed by M-Jet Development and the community into a brand new design, while keeping the style of the original M-Jet Sprint.\n\n**Note: This is not a physical product. After purchase, you can download computer files which you can use to manufacture your own parts on a 3D printer.**\n**Fully functional and complete RC boat model. All parts including the jet pump and pilots are included.**\n\nSupersprint includes:\n\nSTL files for all parts of the boat, **including the pump**, designed to be FDM 3D printed, mostly with no supports. \n\nSTEP file of the whole boat except for the pump (the pump is only included in the STL format).\n\nYou can 3D print it and assemble it with help of the manual, link above. You need to buy all electronics, screws and other necessary parts yourself - part list is in the manual, too.\n\n**Update log**\n\nSprint 2021-12.03.2024 - update log was deleted because CGTrader did not allow description longer than 10000 characters.\n\nSupersprint since 12.03.2024\n\n**Update 12.03.2024** Supersprint V0 was uploaded.\n\n**Update 14.03.2024** Supersprint V0.1: A quick small patch. An issue with too low wall thickness on hull middle in front left part of the lid interface was fixed - thanks San Xu for reporting this. An instruction about ESC placement was added into the manual.\n\n**Update 17.03.2024** Supersprint V0.2: Some more information was added into the manual, part list and the drawing. Length of the flat spot on the driveshaft in the motor coupler area was slightly decreased.\n\n**Update 20.03.2024** Supersprint V0.3: Slot for a third threaded insert for an option to adjust the ride plate was added onto the pump based on suggestion by Ryan Frair. 3 new ride plates with a hole for a third screw were added. The default tolerance on the main bearing in Hull rear was slightly decreased for a tighter fit. After a discussion with Justin Wombwell, a tolerance mod for tighter tolerances on both seals and both bearings was added into the MODS folder. Also, based on a feedback from Justin Wombwell, the TPU lid corner was extended for better grip. Tiny changes to file naming and part list were performed. Thanks everyone for your feedback!\n\n**Update 26.03.2024**: Upon a request, a single piece hull STL was added into the hull folder. Furthermore, the motor KV chart was modified based on measurements of the Supersprint's pump. Maximum recommended KV for 3650 and 3660 motors was decreased. Recommendations of battery capacity were added. The STEP file was renamed to match the version V0.3 but there are no changes to it.\n\n**Update 21.04.2024**: Supersprint V0.4: Optimisation of the pump is finished with the optimised impeller. Improved Lid_base geometry thanks to suggestion by Lenny B - thanks for your contribution!\n\n**Update 29.04.2024**: A 3D printable watercooling jacket for 36xx motors designed and kindly shared by Lenny B was added into the MODS folder in Supersprint V0.4. Thanks for sharing!\n\n**Update 15.05.2024**: A note about TPU Lid hardness was added into the Supersprint manual and Supersprint part list. The TPU hardness should not exceed 40D / 85A to generate proper seal of the lid.\n\n**Update 19.05.2024**: A long bumper for the Sprint was added into the Mods_for_M-Jet_Sprint folder, front bumper.\n\n**Update 24.06.2024**: Supersprint V1. 1) Supercharged V8 Engine with a moving butterfly valve, including a build video: https://youtu.be/LI-jd7MZr8I?si=lIpHHRi-onzhaG0s\n2) Printable tool for painting flames\n3) Drybox mini\n4) V0.4 to V1 conversion package to make the engine work with Supersprint V0.4\n5) Multiple explanations added in the file folders, where questions were arising frequently. Some touches to the documentation. File organization. Some mods from you now in one place.\n\n**Update 09.07.2024**: A single piece hull version was added into the Supersprint_V1 Hull folder.\n\n**Fix 11.07.2024**: A mistake in the part list (both in the excel sheet and the manual) was showing a 3x53 engine slider shaft instead of 3x62 engine slider shaft. This is now corrected to 3x62 engine slider shaft, thanks Jordan for reporting the issue.\n\n**Update 21.07.2024** Thanks to a suggestion by James, a version of hull front joined together with hull middle has been added to the Supersprint V1 hull folder. This can be printed as a single piece without supports. Despite being possibly a bit unstable on the print plate, some people might prefer this and avoid one glued joint.\n\n**Update 05.08.2024** A modded servo mount with different geometry for a different servo by Dave was added into the Supersprint MODS folder. Thanks for sharing!\n\n**Update 12.08.2024** Upon a request, more nozzle options were added to the existing collection: +7, +12, +20. (I guess there is no reason for not adding more nozzles:) Furthermore, a modified Motor mount versions for different servos with altered shaft position were added into the Supersprint MODS folder.\n\n**Update 16.08.2024** A Jet Jam mod which uses the original Sprint pump scaled down to 75% created by Justin was added into the Sprint mods folder. Thanks for sharing!\n\n**Update 30.08.2024** The empirical equation in the Supersprint manual to calculate amp draw was updated to better match reality at very low KV and simplified to the most user friendly form.\n\n**Update 31.08.2024** Some nozzle versions were placed upside down. Thanks James for reporting this issue, it's now corrected. Description of ESC in part list was refined.\n\n**Update 01.09.2024** The steering shaft was found to have slightly incorrect dimensions. Drawing, part list, manual and STEP file were updated, the steering shaft should be 110mm long instead of 112mm (old).\n\n**Fix 03.10.2024** Based on a report, KV selection for 28xx motors was designed too high and could lead to damaging the motor. Recommended KV for 28xx motors was reduced in the manual. No other changes.\n\n**Fix 02.11.2024** Based on a report, the Steering and driveshaft jig by Kristian in the Supersprint mods folder was resized to fit the new version of Steering shaft. No other changes.\n\n**Update 30.11.2024** New information was added into the manual, print settings section. It solves an artifact on Hull front and Hull middle. The solution was found by James Tucker, thank you!\n\n**Update 30.01.2025** A hull with closed flood chamber holes was added into the Supersprint MODS folder. Thanks for the suggestion by Michl.\n\n**Update 12.05.2025** A new TPU shaft seal design by Fabien was added into the Mods folder. This can be used instead of the regular oil seal. Full watertight seal was achieved in a test run.\n\n**Update 04.05.2026** Duck mod by Chris was added into the mods folder, thanks!","imageAlt":"M-Jet Supersprint - 3D Printable RC Jetboat","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/m-jet-sprint-3d-printable-rc-jetsprint-boat-model","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/SeRrG1chnc2n8KRYRmT4LXao/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/01.jpg","gridUrl":"https://media.cgtrader.com/variants/SeRrG1chnc2n8KRYRmT4LXao/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/01.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/m-jet-sprint-3d-printable-rc-jetsprint-boat-model","isCgtVerified":true,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":216,"name":".jpg","is_native":false},{"id":100,"name":".pdf","is_native":false},{"id":129,"name":".3mf","is_native":false},{"id":215,"name":".png","is_native":false},{"id":7,"name":".dxf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/2941615/8539a42411/m-jet-supersprint-3d-printable-rc-jetboat-model-3d-model-8539a42411.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"4672965","type":"listingItem","attributes":{"id":4672965,"title":"RC Drift Wing","price":0.0,"description":"RC Drift wing for 180sx or any other rc drift body. (Last picture is from my slicer, orientation i used to print them.)\n\nPrint settings:\n\n-Filament material: PLA / PETG / ABS\n\n-Infill: 42% (Monotonic)\n\n-Supports: No\n\n-Resolution: 0.4 nozzle 0.2 layer height\n\n-Wall Count/Perimeters 3","imageAlt":null,"url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/rc-drift-wing","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/HKsh6qXsKAzd3pphixzDkWXG/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Preview1.jpg","gridUrl":"https://media.cgtrader.com/variants/HKsh6qXsKAzd3pphixzDkWXG/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Preview1.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/rc-drift-wing","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"automotive","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Automotive \u0026 Car parts","schemaImageUrl":"https://img-new.cgtrader.com/items/4672965/02b7e9bcf6/rc-drift-wing-3d-model-02b7e9bcf6.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"5334277","type":"listingItem","attributes":{"id":5334277,"title":"1 20 Vosper MTB RC Model Boat","price":50.0,"description":"The 72 ft Vosper Motor Torpedo Boats (MTBs) were designed for the British Royal Navy during WWII and like the US Navy PT Boats, they carried torpedoes, depth charges, machine guns and light 20 to 40 mm cannons for coastal defense and special operations.\nMTB 73 was one of 27 boats ordered by the British Admiralty in May 1940. A unique characteristic of this Vosper design were the pathways on the foredeck and hull for lauching torpedoes. MTB 73 was the first Vosper boat to use American Packard marine engines, the same engines used by the American PT boats such as John F Kennedy's PT 109.  \n\nThe US Navy did not use Vosper MTBs during WWII. However, U.S. manufacturers did build 136 of them under license for the Royal Navy as part of the Lend Lease program with Great Britain and the Soviet Union. US Navy PT 73, the boat used in the 1960s TV show and movie “McHale’s Navy”  was actually PT-694.  PT-694 was a Vosper MTB design produced in the USA for the Soviet Union. Completed too late for the war, it was purchased by Howard Hughes who used it as a tender for his “Spruce Goose” aircraft. It was eventually sold it to Universal Studios and reconfigured as PT 73.\n\nThe model’s dimensions are: 1106 x 293 x 446 mm. Scale details includes torpedo tubes, twin Vickers machine gun and four crew figures.\n\nThis model boat is design for radio controlled operation using triple brushless motors and the setup is similar to the bensworx 1 20 PT 109 RC Model Boat.\n\nAll stls were sliced with Cura v5.8 and test printed. The hull is printed in 6 sections and should fit in a 3d printer with a 250mm x 250mm x 250mm build volume.\n\nbensworx\nOct 2024\n\n\n","imageAlt":"1 20 Vosper MTB RC Model Boat hobby-accessories","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/1-20-vosper-mtb-rc-model-boat","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/MnWQ4KCcER5oQvCJsUGjyDmp/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/VosperMTB_01.jpg","gridUrl":"https://media.cgtrader.com/variants/MnWQ4KCcER5oQvCJsUGjyDmp/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/VosperMTB_01.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/1-20-vosper-mtb-rc-model-boat","isCgtVerified":true,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":14,"name":".skp","is_native":false},{"id":129,"name":".3mf","is_native":false},{"id":21,"name":".blend","is_native":false},{"id":216,"name":".jpg","is_native":false},{"id":100,"name":".pdf","is_native":false},{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/5334277/ba59697d19/1-20-vosper-mtb-rc-model-boat-3d-model-ba59697d19.webp","saleOffDiscount":50,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"3575783","type":"listingItem","attributes":{"id":3575783,"title":"Jeep Wrangler 2Door 2022 ","price":0.0,"description":"Jeep Wrangler 2Door 2022 \n\nScale Model •1:8•1:10•1:12•1:18•1:24•1:25•1:28•1:32•1:35•1:43•1:64•\n\n\nIf you want to add or change something as well as if you have any problems with the model, write me, I will help you.\n\n\nIf you have questions, write me \n","imageAlt":"3D printable model Jeep Wrangler 2Door 2022","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/jeep-wrangler-2door-2022","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/cZnNrr7Qz31rbV367Nw9i29n/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/1.jpg","gridUrl":"https://media.cgtrader.com/variants/cZnNrr7Qz31rbV367Nw9i29n/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/1.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/jeep-wrangler-2door-2022","isCgtVerified":true,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"automotive","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Automotive \u0026 Car parts","schemaImageUrl":"https://img-new.cgtrader.com/items/3575783/5b27a59b8e/jeep-wrangler-2door-2022-3d-model-5b27a59b8e.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"3566321","type":"listingItem","attributes":{"id":3566321,"title":"Jet propelled RC boat for 3D printing","price":5.0,"description":"This was designed in blender for 3D printing.  I personally have printed this, and it works great!","imageAlt":"Jet propelled RC boat for 3D printing powered","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/jet-propulsion-rc-boat-for-3d-printing","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/t4yPyCFNZ5x4QM2KkyxY4yYP/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Boatpic.jpg","gridUrl":"https://media.cgtrader.com/variants/t4yPyCFNZ5x4QM2KkyxY4yYP/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Boatpic.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/jet-propulsion-rc-boat-for-3d-printing","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/3566321/b3470746cd/jet-propelled-rc-boat-for-3d-printing-3d-model-b3470746cd.webp","saleOffDiscount":50,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"5638620","type":"listingItem","attributes":{"id":5638620,"title":"Fuel cell tank 1-10 RC accessory","price":0.0,"description":"This original and highly detailed 1/10 scale fuel cell tank comes in 4 versions. Logo and non logo. As well as a 1 piece or 2 piece print for each of the versions.\n\nThe 1 piece version includes a logo and non logo version. The lid is fixed to the body and cannot be removed to store things.\n\nThe 2 piece version, which also includes the logo and non logo versions, have a removable lid which can then access to a full depth storage area, which can be used to store electronics (May require modification for electronic leads), lead weights, or whatever fits. The lid is intended to be secured with hot glue as a less permanent fixture, or super glue which is permanent.\n\n\nAs the “1/10” scale is more of a loose standard, feel free to scale up or down in your slicer to fit your own rig, if necessary. \n\nSame with all of our other print files, it is highly recommended to print only with a resin printer to achieve the maximum amount of details, and do remember to wear PPE.\n\nPost processing is the same with our other products. Use a spray primer depending on your resin type, then either spray paint or hand paint with model paints to your own liking. Top it off with thin coats of UV-proof clear spray.\nTo get the logo’s background to a different colour, it is recommended to first spray a layer of your desired paint, then hand paint the rest. Remember to spray UV-proof clear coats at the end. Feel free to use the renderings as an inspiration for your colour schemes!\n","imageAlt":"Fuel cell tank 1-10 RC accessory 3D printable model","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/fuel-cell-tank-1-10-rc-accessory","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/DT9X8iVvXy9zv77uu5FJ5r1C/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/fuel%20cell%20tank%202.jpg","gridUrl":"https://media.cgtrader.com/variants/DT9X8iVvXy9zv77uu5FJ5r1C/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/fuel%20cell%20tank%202.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/fuel-cell-tank-1-10-rc-accessory","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"automotive","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Automotive \u0026 Car parts","schemaImageUrl":"https://img-new.cgtrader.com/items/5638620/7c0a1b0a85/fuel-cell-tank-1-10-rc-accessory-3d-model-7c0a1b0a85.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"2616193","type":"listingItem","attributes":{"id":2616193,"title":"Custom Designed triple jet driven SpeedBoat","price":25.0,"description":"Custom designed speedboat with 3 x 30 mm jets.\nHull is 44 cm long and aprox 16 cm wide...\nThe models for the jets are included and fit a standard 540 brushed motor ... there is also a zip file with a printable 25mm dog and impeller that fits the jets.\nThe jets have 2 x  22mm bearing seats and  fits  a standard 8mm rod (100mm length) .\nThere are no couplings between motor and rods in the this pack!(make one that fits your motor shaft  or spurgears)\n I use this setup with one motor on the middle jet with a couple n gear in one to drive the spur gears on the outer jets!\nThis  speeder can be customized to fit any hardware u want! (Lots of space below deck! nice for extra lipo's, arduino's or other controllerboards)\nAl 3 jets output to one  wide nozzle and has a wide steering diffuser on the end( easy to change into 3 seperate outputs ...just remove the wide nozzle and fit your own solution to the back of the jets)\nExtra thick underside that will withstand  a beating!\n\nHigh quality 3dmodels that have been optimized for 3dprinting.\n","imageAlt":"Custom Designed triple jet driven SpeedBoat 3D print model","url":"https://www.cgtrader.com/3d-print-models/games-toys/other/custom-designed-triple-jet-driven-speedboat","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/4EZ3T2Ze9oG4XQpvyNe5oz82/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/119962495_2631435077167197_265474388007106534_n%20%282%29.jpg","gridUrl":"https://media.cgtrader.com/variants/4EZ3T2Ze9oG4XQpvyNe5oz82/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/119962495_2631435077167197_265474388007106534_n%20%282%29.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/games-toys/other/custom-designed-triple-jet-driven-speedboat","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"games-toys","subcategorySlug":"other","categoryTitle":"Games \u0026 Toys","subcategoryTitle":"Other","schemaImageUrl":"https://img-new.cgtrader.com/items/2616193/93eff9aff1/custom-designed-triple-jet-driven-speedboat-3d-model-93eff9aff1.webp","saleOffDiscount":70,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"3733781","type":"listingItem","attributes":{"id":3733781,"title":"RC CAR - FRONT AXLE WITH DIFFERENTIAL","price":0.0,"description":"OR DIFFERENTIAL : ID-8, OD-18, THICKNESS : 5\n            FOR FRONT WHEEL DRIVE : ID-9, OD-19 THICKNESS:5\n            * ALL UNITS IN mm\nMATERIAL USED IS :PLA","imageAlt":"3D print model RC CAR - FRONT AXLE WITH","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/rc-car-front-axle-with-differential","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/P7tn2CJU3pf22q7XVWpwEzcE/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/0f921b8e-2242-4f69-a5ef-b26c3e4c5f23.jpg","gridUrl":"https://media.cgtrader.com/variants/P7tn2CJU3pf22q7XVWpwEzcE/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/0f921b8e-2242-4f69-a5ef-b26c3e4c5f23.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/rc-car-front-axle-with-differential","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"automotive","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Automotive \u0026 Car parts","schemaImageUrl":"https://img-new.cgtrader.com/items/3733781/922e0949ca/rc-car-front-axle-with-differential-3d-model-922e0949ca.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"2324648","type":"listingItem","attributes":{"id":2324648,"title":"1 20 PT 109  RC Model Boat","price":50.0,"description":"The 80 foot ELCO PT boats are the most iconic of all WWII motor torpedo boats. PT 109, commanded by Lt (jg) John F. Kennedy, the 35th U.S. president, is the most recognizable boat of the PT 103 class. On the night of Aug 2-3 1943, PT 109 was rammed and sunk by the IJN Amagiri in Blackett Strait of the Solomon Islands. Kennedy’s ordeal following that collision was dramatized in the “PT 109” movie.  The 80 ft ELCO PT boats were also used in the filming of “They Were Expendable” with John Wayne.  This scale model has been designed for high speed radio control operation using three brushless out runner motors on 4S LIPO batteries. Hull details include triple 10mm (or 8mm) propeller tube bore, brushless motor mounts and rudders. Scale details include a 20mm Oerlikon cannon, twin 50 caliber machine gun turrets, torpedo tubes, depth charge racks, rear mufflers and Cockpit Bridge. Removable chartroom and day cabin assemblies provide access to radio control equipment and batteries.\nAt 1/20th scale, the model dimensions are 1216 x 319 x 376mm.  Over 1000 hours was expended in model’s design for 3d printing on Sketchup CAD tools and the CURA slicer. Hull lines and other details came from Original ELCO factory drawings. \n\nThe hull and integrated deck are printed in four sections vertically. A 3D printer with a volume of 300x300x330mm is recommended.  However, the hull was also divided into 16 sections for printers with a 250 x 250 mm bed.\n\nPlan on using 3 to 4 boxes of PLA filament. Instructions and interactive 3d-pdf files are included to aid in the assembly of this large “plastic” kit.\nAll 186 STL files were manifold checked before printing. CURA v4.5 project files, and compiled gcodes are included.\nThe RC performance is better than scale speed with a 4S LIPO battery. If the model gets damaged as a result of a collision, another can be 3D printed making this model truly “Expendable” .\n\nThe model was printed using Ben Levi's open source BLV_MGN Cube #D Printer. Details can be found here:\n\nhttps://www.thingiverse.com/thing:3382718\nhttps://www.blvprojects.com/\n\nHere is my FB page\n\nhttps://www.facebook.com/bens.worx.3dp\n\n\n","imageAlt":"1 20 PT 109 RC Model Boat","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/pt-109-radio-controlled-model-boat","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/ZNRfm7cFdah1QkCSd3Q4R2MK/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/DSC_8561.jpg","gridUrl":"https://media.cgtrader.com/variants/ZNRfm7cFdah1QkCSd3Q4R2MK/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/DSC_8561.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/pt-109-radio-controlled-model-boat","isCgtVerified":true,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":129,"name":".3mf","is_native":false},{"id":100,"name":".pdf","is_native":false},{"id":null,"name":null,"is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/2324648/531d4e23ce/1-20-pt-109-rc-model-boat-3d-model-531d4e23ce.webp","saleOffDiscount":50,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"5638591","type":"listingItem","attributes":{"id":5638591,"title":"Water tank type 2 1-10 RC accessory","price":0.0,"description":"This original 1/10 scale water tank type 2 comes in 2 versions. Logo and non logo.\n\nThese 2 versions are a 2 piece print, which includes the water tank body and the tap. 1 tank and 1 tap will be needed to complete the kit.\n\nThe design has a hole that will allow the water tap to be plugged into the body. Made to have a light friction fit, it is also possible to secure it with super glue or hot glue. \n\nThere is also another type of water tank (print files sold separately) (water tank type 1) with a different body style which makes it unique. Both type 1 and type 2 water tanks will allow fitting of the same water tap. Both types of water tanks will look really good when matched with an overland type vehicle.\n\nThe water tank and tap can be scaled up or down depending on your specs. But both tank body and tap will need to be scaled at the same time and at the same size to ensure proper fitting of the tap.\n\nIt is also recommended that the tap is printed with a resin printer as the size itself will be a struggle for filament printers to print. The tank itself however can be printed with filament printers, although resin is still recommended.\n\nPost processing is the same with our other products. Use a spray primer depending on your resin type, then either spray paint or hand paint with model paints to your own liking. Top it off with thin coats of UV-proof clear spray.\nTo get the logo’s background to a different colour, it is recommended to first spray a layer of your desired paint, then hand paint the rest. Remember to spray UV-proof clear coats at the end. Feel free to use the renderings as an inspiration for your colour schemes!\n","imageAlt":"Water tank type 2 1-10 RC accessory 3D print model","url":"https://www.cgtrader.com/free-3d-print-models/miniatures/other/water-tank-type-2-1-10-rc-accessory","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/qDkVbT5Uyb1V183ejJQSA1zG/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/water-tank-type-2-1-10-rc-accessory-3d-model-34c93903fd.jpg","gridUrl":"https://media.cgtrader.com/variants/qDkVbT5Uyb1V183ejJQSA1zG/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/water-tank-type-2-1-10-rc-accessory-3d-model-34c93903fd.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/miniatures/other/water-tank-type-2-1-10-rc-accessory","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"miniatures","subcategorySlug":"other","categoryTitle":"Miniatures","subcategoryTitle":"Other","schemaImageUrl":"https://img-new.cgtrader.com/items/5638591/34c93903fd/water-tank-type-2-1-10-rc-accessory-3d-model-34c93903fd.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"1916304","type":"listingItem","attributes":{"id":1916304,"title":"RC Racing Boat Pilot","price":39.0,"description":"Detailed And Printable RC Racing Boat Pilot\n\u003cbr\u003eCurrent Data Scale 1:6\n\n**Please note!\n\u003cbr\u003eAny printing results are up to the skill and equipment of the buyer.\n\u003cbr\u003eNo correspondence can be made on issues of customization of the scale and its printability.\n\u003cbr\u003eThe price of this high quality models is not negotiable.**\n\n**C U S T O M - S C A L I N G**\n\u003cbr\u003eHere is a step by step way to scale the models to your desired scale. \n\u003cbr\u003e**1.** Copy all models into one document and save it.\n\u003cbr\u003e**2.** Most of my 3D models have an initial scale of 1/6. Therefore scale up the whole content of this document with the factor 6.0 to the scale 1/1.\n\u003cbr\u003e **3.** Then scale the whole content from 1/1 to your estimated scale \n\u003cbr\u003eOr without guarantee - here is a helpful list of scaling factors for the most common scales:\n\n\u003cul\u003e\n  \u003cli\u003e1:6 = 100%\u003c/li\u003e\n  \u003cli\u003e1:1 = 600%\u003c/li\u003e\n  \u003cli\u003e1:9 = 66,67%\u003c/li\u003e\n  \u003cli\u003e1:10 = 60%\u003c/li\u003e\n  \u003cli\u003e1:12 = 50%\u003c/li\u003e\n  \u003cli\u003e1:16 = 37,5%\u003c/li\u003e\n  \u003cli\u003e1:18 = 33,33%\u003c/li\u003e\n  \u003cli\u003e1:24 = 25%\u003c/li\u003e\n  \u003cli\u003e1:25 = 24%\u003c/li\u003e\n  \u003cli\u003e1:32 = 18,75%\u003c/li\u003e\n  \u003cli\u003e1:35 = 17,14%\u003c/li\u003e\n  \u003cli\u003e1:43 = 13,95%\u003c/li\u003e\n  \u003cli\u003e1:48 = 12,5%\u003c/li\u003e\n  \u003cli\u003e1:50 = 12%\u003c/li\u003e\n  \u003cli\u003e1:64 = 9,375%\u003c/li\u003e\n  \u003cli\u003e1:72 = 8,33%\u003c/li\u003e\n  \u003cli\u003e1:87 = 6,9%\u003c/li\u003e\n  \u003cli\u003e1:144 = 4,17%\u003c/li\u003e\n  \u003cli\u003e1:160 = 3,75%\u003c/li\u003e\n  \u003cli\u003e1:220 = 2,73%\u003c/li\u003e\n  \u003cli\u003e1:350 = 1,71%\u003c/li\u003e\n\u003c/ul\u003e","imageAlt":"3D printable model RC Racing Boat Pilot","url":"https://www.cgtrader.com/3d-print-models/miniatures/figurines/rc-racing-boat-pilot","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/RVVWs8wZVtMXypFymMxErk8x/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/rc-racing-boat-pilot-3d-model-obj-mtl-stl.jpg","gridUrl":"https://media.cgtrader.com/variants/RVVWs8wZVtMXypFymMxErk8x/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/rc-racing-boat-pilot-3d-model-obj-mtl-stl.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/miniatures/figurines/rc-racing-boat-pilot","isCgtVerified":true,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":12,"name":".obj","is_native":false}],"categorySlug":"miniatures","subcategorySlug":"figurines","categoryTitle":"Miniatures","subcategoryTitle":"Action Figures \u0026 Statues","schemaImageUrl":"https://img-new.cgtrader.com/items/1916304/a9f2254d05/rc-racing-boat-pilot-3d-model-a9f2254d05.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"7035223","type":"listingItem","attributes":{"id":7035223,"title":"Patty Wagon - Cangremovil","price":0.0,"description":"English:\n3D design of the famous Patty Wagon from the SpongeBob SquarePants show, optimized for 3D printing on any machine you have—perfect for decoration or for carrying out creative projects.\n\nEspañol:\nDiseño 3D del famoso cangremovil del programa Bob Esponja, optimizado para la impresion 3D con cualquier maquina que tengas, perfecto para decorar o llevar acabo tus proyectos creativos.","imageAlt":null,"url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/patty-wagon-cangremovil-fd5afbd3-3d43-4c67-9089-8de6962f1627","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/t7td60bxm3gx07lh01i0rntbrng1/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Krabby%20Patty%20Wagon.jpg","gridUrl":"https://media.cgtrader.com/variants/t7td60bxm3gx07lh01i0rntbrng1/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Krabby%20Patty%20Wagon.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/patty-wagon-cangremovil-fd5afbd3-3d43-4c67-9089-8de6962f1627","isCgtVerified":true,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":215,"name":".png","is_native":false},{"id":216,"name":".jpg","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/7035223/5c22dbb5cb/patty-wagon-cangremovil-3d-model-5c22dbb5cb.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"4563764","type":"listingItem","attributes":{"id":4563764,"title":"3D PRINTED RC PATROL JET BOAT","price":55.0,"description":"This rc boat is a boat that can be used as a patrol boat, sar boat and pilot boat,\n\nThis boat is a replica of the Palfinger Marine PB 1500 model\nInclude :\n- List of Materials\n- Assembly instruction :\n\nIn this boat i use :\n- 3536 1200kv motor brushless (x2)\n- ESC 50 amp (x2)\n- Servo MG 996R (I hope you are using a waterproof servo)\n- 3S Lipo battery 3000mAh (bigger capacity would be better)\n\nLength hull : 85 cm\nScale 1:17,65\n\n\nDemo Video :\n\nInstagram ---------------------------------------------------\n\nhttps://www.instagram.com/reel/CuTY6laopzv/?igshid=YmM0MjE2YWMzOA==\n\nhttps://www.instagram.com/reel/CtJizgxILbO/?utm_source=ig_web_copy_link\u0026igshid=MzRlODBiNWFlZA==\n\nhttps://www.instagram.com/reel/CuFeyHJom7f/?igshid=MzRlODBiNWFlZA==\n\nhttps://www.instagram.com/reel/CuE3nelIoG2/?igshid=MzRlODBiNWFlZA==\n\nYoutube - ----------------------------------------------------\nhttps://youtu.be/rm48V82XIgo\n\nTest File (the large part):\n\nhttps://drive.google.com/drive/folders/11pkpJx0rwMki7SkRsvI-TlTN-I-YE8kr?usp=sharing\n\navailable hulls with jets and without jets are provided for your best jet\n\nYou'll need sanding, apply putty, and painting the hull for better results\n\nHappy printing :)\n\n3D PRINTING SETTINGS\nI use Standard Ender 3 Pro V2 machine\n\nbuild volume : 235x235x250\n\nif your default printer setting is 220x220x250, we can change it in manage printer - machine settings, change the value from 220x220x250 to 235x235x250","imageAlt":"hobby-diy 3D PRINTED RC PATROL JET BOAT","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/3d-printed-rc-patrol-boat-water-jet","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/gz4sJXtPrTs8HJ7AVVWK3Rb2/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/PXL_20240810_100045384.MP.jpg","gridUrl":"https://media.cgtrader.com/variants/gz4sJXtPrTs8HJ7AVVWK3Rb2/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/PXL_20240810_100045384.MP.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/3d-printed-rc-patrol-boat-water-jet","isCgtVerified":true,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":215,"name":".png","is_native":false},{"id":129,"name":".3mf","is_native":false},{"id":51,"name":".stl","is_native":false},{"id":216,"name":".jpg","is_native":false},{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/4563764/d8d07161bf/3d-printed-rc-patrol-jet-boat-3d-model-d8d07161bf.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6426604","type":"listingItem","attributes":{"id":6426604,"title":"A ship on the waves","price":0.0,"description":" My work ranges from stylish home and office decorations to functional accessories that add a creative touch.\n I also design special themed models for occasions like Halloween and Christmas, so you can celebrate in a fun and distinctive way.\n My goal is always to combine functionality with beauty, making every print an enjoyable experience with results that truly stand out.","imageAlt":"3D print model A ship on the waves","url":"https://www.cgtrader.com/free-3d-print-models/house/decor/a-ship-on-the-waves","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/hccdk9mqoq93o474gb912kef4wlk/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/20250905_1455_%D9%85%D9%86%D8%B8%D8%B1%20%D9%85%D9%86%20%D8%A7%D9%84%D8%AE%D9%84%D9%81_remix_01k4dxxt3bfjw9bcz6drzc84jj.jpg","gridUrl":"https://media.cgtrader.com/variants/hccdk9mqoq93o474gb912kef4wlk/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/20250905_1455_%D9%85%D9%86%D8%B8%D8%B1%20%D9%85%D9%86%20%D8%A7%D9%84%D8%AE%D9%84%D9%81_remix_01k4dxxt3bfjw9bcz6drzc84jj.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/house/decor/a-ship-on-the-waves","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"house","subcategorySlug":"decor","categoryTitle":"Home \u0026 Living","subcategoryTitle":"Home decor","schemaImageUrl":"https://img-new.cgtrader.com/items/6426604/9c4f49270f/a-ship-on-the-waves-3d-model-9c4f49270f.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"7302796","type":"listingItem","attributes":{"id":7302796,"title":"RC battleship HN Georgios Averof 3D Model","price":70.0,"description":"This set of files enables you to build a fully working 1/96th scale RC model of the Hellenic Navy's armoured cruiser Georgios Averof.  The files will create a highly detailed scale model of the ship - everything you see in the photos is included in the files apart of course from the hardware such as propellor shafts and motors.\n\nThe Hellenic Navy Armoured Cruiser, Georgios Averof, was built in Italy in 1909, bought by Greece in 1910 as the flagship of the Greek Navy and served in 2 world wars before being retired and preserved as a museum ship one can visit on the outskirts of Athens.\n\nThe model is fully working, with electric motors and Radio Control and was built on a 3D filament printer with a bed of at least 220mm cubed.  The model is 1/96th scale creating approximately a boat 1500mm long by 220mm wide.  It's an unusual subject as few model-makers build models of pre WW1, pre-Dreadnought battleships, and yet she is an impressive model to see pondside because of the wealth of scale detail modelled.\n\nA full instruction booklet is provided.  If you wish to look at that before purchase of these files, a free copy is available here  https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/rc-battleship-georgios-averof-instructions which will show you everything that is involved in building this model.\n\nAs always, I am available via the cgtrader messaging to give advice of help  and I always enjoy seeing your finished models!","imageAlt":"RC battleship HN Georgios Averof 3D Model","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/rc-battleship-hn-georgios-averof-3d-model","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/kgmhk711tiwm6rdmoacmej7cnhyf/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/20260628_125718.jpg","gridUrl":"https://media.cgtrader.com/variants/kgmhk711tiwm6rdmoacmej7cnhyf/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/20260628_125718.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/rc-battleship-hn-georgios-averof-3d-model","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":100,"name":".pdf","is_native":false},{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/7302796/3c4643e40b/rc-battleship-hn-georgios-averof-3d-model-3d-model-3c4643e40b.webp","saleOffDiscount":50,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"7143825","type":"listingItem","attributes":{"id":7143825,"title":"British Supermarine Walrus Flying Boat","price":0.0,"description":"1/900th scale Supermarine Walrus Flying Boat model. Certain elements not to scale.\n\nThe Supermarine Walrus was a British amphibious reconnaissance and rescue aircraft built from 1936–1944, with 740 produced for the Royal Navy, RAF, and other Allied operators. The aircraft served in many roles and with several countries throughout and after World War II. Its typical armament consisted of two 7.7 mm Vickers K machine guns (one in the nose and one rear position) and up to 345 kg (760 lb) of bombs or depth charges for anti-submarine patrols; later Walrus II aircraft changed construction from metal hulls to wooden hulls to conserve strategic materials.\n\nThis model is designed and tested at 1/900th scale, but up-scaling and down-scaling are possible. Since the model is optimized for 1/900th scale, it is not ideal to print larger versions due to a lack of detail. The model has been enlarged along the z axis to allow for better printing and accentuation of detail. The model has also been given thicker elements for strength. The wingspan and overall length are to scale.\n\nAvailable are both individual and squadron files. You can find the stand at https://www.cgtrader.com/free-3d-print-models/miniatures/vehicles/stand-for-miniature-aircraft.\n\nThis is part of my collection of WWII aircaft, keep an eye out for more to come. If you have a specific request, message me and I'll bump it up my list.\n\nTested with PLA at .1mm layer height with .4mm nozzle.","imageAlt":"British Supermarine Walrus Flying Boat","url":"https://www.cgtrader.com/free-3d-print-models/miniatures/vehicles/british-supermarine-walrus-floatplane","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/cbfwh5g6vjsae71hgf3xl0vql7dn/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Walrus1.jpg","gridUrl":"https://media.cgtrader.com/variants/cbfwh5g6vjsae71hgf3xl0vql7dn/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Walrus1.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/miniatures/vehicles/british-supermarine-walrus-floatplane","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":189,"name":".ply","is_native":false},{"id":12,"name":".obj","is_native":false},{"id":51,"name":".stl","is_native":false}],"categorySlug":"miniatures","subcategorySlug":"vehicles","categoryTitle":"Miniatures","subcategoryTitle":"Cars \u0026 Vehicles","schemaImageUrl":"https://img-new.cgtrader.com/items/7143825/1978f9c45b/british-supermarine-walrus-flying-boat-3d-model-1978f9c45b.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"5213472","type":"listingItem","attributes":{"id":5213472,"title":"1 32 RC Schooner","price":50.0,"description":"\n\nThis is a 3d printed version of a scratch built radio controlled schooner. A video of this model sailing in strong winds is shown here:\nhttps://www.youtube.com/watch?v=wwWV6K05fUc\u0026t=10s\nA radio controlled model schooner always attracts an admiring crowd (especially women) as they are a majestic sight sailing into the wind.  Experience has shown that a model schooner with a full set of sails would not perform well unless there is a deeper than scale keel attached.  Therefore, a slot that runs along the keel in the hull is designed in for a detachable fin with a weighed bulb for added stability.  \nThe 1923 hull lines and deck arrangement of the schooner Columbia were used at 1/32 scale for the 3D printed version. \nThe hull is divided into 9 sections for printing on a 250 x250 x 250 mm bed. Longer hull sections are provided for printers with larger 300 x 300x 300 mm volumes. The hull has planking lines, bulwarks and scupper holes drawn in.  \nThe auxlliary motor uses a RS-380 DC motor with a GT2 timing belt for a gear reduction of 1:3.\nThe fore and main masts are removable for ease of transportation and storage. \nTwo Hitec HS-785HB drum type sail winches are used for sheeting the sails.\n\n Sails can be fabricated using pre shrunk cotton cloth, lightweight Dacron or Tyvek sheets.\nA hollow 3D printed bulb that can be filled with lead shot is provided. This bulb is attached to an aluminum fin which slides into the hull’s center axially from the bottom and secured with a cotter pin at deck level.\nHull access is provided via removable locker, main cabin, anchor winch, rudder housing and various hatches.\nWood PLA is highly recommended for the hull and deck. Cura’s ironing feature on the deck surface creates a basswood like texture.\nFully rigged dimensions with detachable keel inserted are:\n1607.0 x 244.5 x 1380.5 mm\n\n","imageAlt":"3D print model 1 32 RC Schooner","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/1-32-rc-schooner","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/cCbWTggoBVw6urVXm5QmhUs8/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/DSC_6267.jpg","gridUrl":"https://media.cgtrader.com/variants/cCbWTggoBVw6urVXm5QmhUs8/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/DSC_6267.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/1-32-rc-schooner","isCgtVerified":true,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":129,"name":".3mf","is_native":false},{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/5213472/547fbcf38c/1-32-rc-schooner-3d-model-547fbcf38c.webp","saleOffDiscount":50,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6845562","type":"listingItem","attributes":{"id":6845562,"title":"Keychain of boat 3D Printable keychain","price":0.0,"description":"Its a small 3d printable boat as a keychian.\nFree 3D Printable Keychian of boat","imageAlt":"Keychain of boat 3D Printable keychain","url":"https://www.cgtrader.com/free-3d-print-models/art/other/keychain-of-boat","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/fd4n8vcho0brtv7mjt904deevwmr/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Boat%20as%20keychain.jpg","gridUrl":"https://media.cgtrader.com/variants/fd4n8vcho0brtv7mjt904deevwmr/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Boat%20as%20keychain.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/art/other/keychain-of-boat","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"art","subcategorySlug":"other","categoryTitle":"Art \u0026 Design","subcategoryTitle":"Other","schemaImageUrl":"https://img-new.cgtrader.com/items/6845562/421ff70a88/keychain-of-boat-3d-printable-keychain-3d-model-421ff70a88.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"1984716","type":"listingItem","attributes":{"id":1984716,"title":"1 48 Flower Class Corvette RC Model Ship","price":50.0,"description":"Flower Class Corvettes were Royal Navy warships used to protect convoys from German Uboats bringing supplies to support the Allied War effort during the Battle of the Atlantic in WWII. This radio controlled model ship was printed in PLA on a 3D printer with a build volume of  210x186x160mm. Hull line drawings and other details were taken from \"Anatomy of a Flower Class Corvette-HMS Agassiz\".  Plan on using 4 to 5 boxes of filament. The hull is about 1.3 meters long and it alone took two boxes and ~200 hours to print.  Hull details include 8.8mm prop shaft bore, weld lines, port holes, bilge strakes, scuppers, rudder post with servo mount and a motor mount for a Mabuchi 750 type brushed motor.  The mid deck and and engine roof are removable for  radio equipment and motor battery access. Scale details include depth charge racks/launchers, dinghys, life rafts,  4 inch gun, 2pdr gun, 20mm guns. All stl files manifold checked and printed. CURA v4.0 project files, compiled gcodes and instructions are also included.\n\nThe Aug 8, 2021 re - release contains reworked hull files that will work with other slicing programs like Simplify3D and PrusaSlicer.\nCura is still the preferred slicer. People who already purchased the initial May 2019 release should be able to download the Aug 2021 re release for free.\n\nhere is my FB page\nhttps://www.facebook.com/bens.worx.3dp\n","imageAlt":"1 48 Flower Class Corvette RC Model Ship","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/flower-class-corvette","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/AjbwGCAxoMFKEnD86dSQ2wm5/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/DSC_7546.jpg","gridUrl":"https://media.cgtrader.com/variants/AjbwGCAxoMFKEnD86dSQ2wm5/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/DSC_7546.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/flower-class-corvette","isCgtVerified":true,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":129,"name":".3mf","is_native":false},{"id":51,"name":".stl","is_native":false},{"id":100,"name":".pdf","is_native":false},{"id":14,"name":".skp","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/1984716/52d30f6fee/1-48-flower-class-corvette-rc-model-ship-3d-model-52d30f6fee.webp","saleOffDiscount":50,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"2402478","type":"listingItem","attributes":{"id":2402478,"title":"Jeep Wrangler Unlimited 2019 on a small scale","price":0.0,"description":"Jeep Wrangler Unlimited 2019 on a small scale\n\nModel on a scale of 1:72 to 1:192;\n\nScale Model •1:72•1:87•1:120•1:160•1:192•\n\n\n\n","imageAlt":"3D print model Jeep Wrangler Unlimited 2019 on a small 1","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/jeep-wrangler-unlimited-2019-on-a-small-scale","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/ZefYtRs9588tJ7BR3XzHgBaG/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/1.jpg","gridUrl":"https://media.cgtrader.com/variants/ZefYtRs9588tJ7BR3XzHgBaG/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/1.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/jeep-wrangler-unlimited-2019-on-a-small-scale","isCgtVerified":true,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"automotive","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Automotive \u0026 Car parts","schemaImageUrl":"https://img-new.cgtrader.com/items/2402478/c9a8da6a36/jeep-wrangler-unlimited-2019-on-a-small-scale-3d-model-c9a8da6a36.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"3564607","type":"listingItem","attributes":{"id":3564607,"title":"SM UC 5 U-boat - RC","price":63.0,"description":"- The package contains digital files of the 3d model - **SM UC 5 U-boat RC**.\n\n- The template contains the following file formats for printing: .blend, .stl, .obj and .ply.\n\n- The Model is scaled according to the metric system (mm).\n\n   Model Scale 1/28: 1220mm ( 48 inches - 122cm) long. \n   \n    At this scale, the walls of the model are between 3 and 4 mm thick. \n\n**Note:** Files with the word PHOTON open in the 'Phonto Workshop' slicer. \n\n................................................................................................\n\n**Created in Blender 3.00**\n\n..................................................................................................\n\n**Mesh:**\n\nVerts - 75,042\n\nFaces - 82,414\n\nTris - 151,368\n\n**Note:** There are no polygons with more than 4 sides throughout the mesh.\n\n.............................................................................................................................\n\n**HISTORICAL NOTE:** The Type UC I coastal submarines were a class of small minelaying U-boats built in Germany during the early part of World War I. They were the first operational minelaying submarines in the world. A total of fifteen boats were built.\n\n......................................\n\n**Specifications:**\n\nGerman Empire\n\nName: UC 5.\n\n...............................................\n\nClass and type: coastal minelaying submarine.\n\nDisplacement: 168 t (165 long tons) surfaced - 183 t (180 long tons) submerged;\n\nLength: 33.99 m (111 ft 6 in);\n\nBeam: 3.15 m (10 ft 4 in);\n\nHeight: 6.30 m (20 ft 8 in);\n\nDraught: 3.04–3.06 m (10 ft 0 in–10 ft 0 in);\n\nPropulsion: 1 shaft - 6-cylinder diesel engines, Siemens-Schuckert electric motor;\n\nSpeed: 6.20–6.49 knots (11.48–12.02 km/h; 7.13–7.47 mph) surfaced --- 5.22–5.67 knots (9.67–10.50 km/h; 6.01–6.52 mph) submerged;\n\nRange: 780–910 nmi (1,440–1,690 km; 900–1,050 mi) at 5 knots (9.3 km/h; 5.8 mph) surfaced; ------ 50 nmi (93 km; 58 mi) at 4 knots (7.4 km/h; 4.6 mph) submerged;\n\nTest depth: 50 m (160 ft);\n\nArmament: 6 × 1 metre (39 in) internal tubes - explosive mine;\n\nComplement: 14 men;\n\n............................................................................\n\n**This 3d model is dedicated to printing for Remote Control Modeling.** \n\n.............................................................................\n\nHope you like! Also check out my other models, just click on my username to view full gallery.\n\nAny doubts please contact me, I am at your disposal.\n\nPlease, if you like, hit like or make a comment.\n\nThank you!","imageAlt":"3D printable model SM UC 5 U-boat - RC","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/sm-uc-5-u-boat-rc","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/P2F4XHQTp5vAXWnkanrbj5tB/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/0001a.jpg","gridUrl":"https://media.cgtrader.com/variants/P2F4XHQTp5vAXWnkanrbj5tB/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/0001a.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/sm-uc-5-u-boat-rc","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":21,"name":".blend","is_native":true},{"id":51,"name":".stl","is_native":false},{"id":189,"name":".ply","is_native":false},{"id":12,"name":".obj","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/3564607/50d3ab9f47/sm-uc-5-u-boat-rc-3d-model-50d3ab9f47.webp","saleOffDiscount":50,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"5010425","type":"listingItem","attributes":{"id":5010425,"title":"WHEEL MODEL WITH TYRES","price":0.0,"description":"size: 60x60x29\nwheel model with tyres.\ntyre and wheel are separate stl.\n\n","imageAlt":"WHEEL MODEL WITH TYRES","url":"https://www.cgtrader.com/free-3d-print-models/miniatures/vehicles/wheel-model-with-tyres","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/W5SrBPs1fYqSpY3C4AzYvWe7/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/my_project-1.jpg","gridUrl":"https://media.cgtrader.com/variants/W5SrBPs1fYqSpY3C4AzYvWe7/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/my_project-1.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/miniatures/vehicles/wheel-model-with-tyres","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"miniatures","subcategorySlug":"vehicles","categoryTitle":"Miniatures","subcategoryTitle":"Cars \u0026 Vehicles","schemaImageUrl":"https://img-new.cgtrader.com/items/5010425/ddaec4cc60/wheel-model-with-tyres-3d-model-ddaec4cc60.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"5901485","type":"listingItem","attributes":{"id":5901485,"title":"Tug Boat - Harbour Boat RC Conversion Kit","price":20.0,"description":"This design is for RC making of your own Tug boat. The hull of the ship is 40 cm in length with the hull spilt down in to 4 parts also if cant print it full. Look at pictures carefully! What you see is what you get! You decide if you can print, everyone's printer is different.\n\nThis kit includes deck parts and a open command bridge where you can place clear windows if wish. Check all images to see what deck details you get in this kit. All to the scale of the hull. Add good support and use good material.\n\nBest sailing and building.","imageAlt":"Tug Boat - Harbour Boat RC Conversion Kit 3D print model","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/tug-boat-harbour-boat-rc-conversion-kit","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/mf06725jku0lbihmikwgjrtbjgi1/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Screenshot%2002-28-2025%2006.38.23.jpg","gridUrl":"https://media.cgtrader.com/variants/mf06725jku0lbihmikwgjrtbjgi1/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Screenshot%2002-28-2025%2006.38.23.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/tug-boat-harbour-boat-rc-conversion-kit","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":12,"name":".obj","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/5901485/30177c7002/tug-boat-harbour-boat-rc-conversion-kit-3d-model-30177c7002.webp","saleOffDiscount":50,"eligibleForSubscription":true,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":"premium"}},{"id":"121349","type":"listingItem","attributes":{"id":121349,"title":"OpenRC 4WD Touring Concept RC Car","price":0.0,"description":"\u003cp\u003eThis i were it started, here´s my first go at creating a printable rc car which later resulted in the OpenRC Truggy car.  \u003c/p\u003e\u003cp\u003eI learned alot from this car and so it´s a little bit different. It´s has belt drive and is built on a aluminum plate so it´s not as \"printable\" as it´s successor (\u003ca href=\"http://www.thingiverse.com/thing:42198\" rel=\"nofollow\"\u003ehttp://www.thingiverse.com/thing:42198\u003c/a\u003e).  \u003c/p\u003e\u003cp\u003eIf you like build one of your own, the belts are from an Xray car (don´t remember the model) and bought at Amainhobbies.com, driveshafts are from Conrad.com.  \u003c/p\u003e\u003cp\u003eIf somebody would like to build one let me know and i will post some more info!  \u003c/p\u003e\u003cp\u003eHere´s a short testdrive video: \u003ca href=\"http://youtu.be/HpFrq0iMeAE\" rel=\"nofollow\"\u003ehttp://youtu.be/HpFrq0iMeAE\u003c/a\u003e  \u003c/p\u003e\u003cp\u003eAs always questions and answers to be found here: \u003ca href=\"https://plus.google.com/u/0/communities/112745535856143176146\" rel=\"nofollow\"\u003ehttps://plus.google.com/u/0/communities/112745535856143176146\u003c/a\u003e  \u003c/p\u003e\u003cp\u003eEnjoy!  \u003c/p\u003e\u003cp\u003e/Daniel Norée\u003c/p\u003e","imageAlt":"3D printable model OpenRC 4WD Touring Concept RC Car","url":"https://www.cgtrader.com/free-3d-print-models/games-toys/toy/openrc-4wd-touring-concept-rc-car","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/t6vc6L3mHdsECeQd1RQwWr57/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/openrc-4wd-touring-concept-rc-car-3d-model-stp.jpg","gridUrl":"https://media.cgtrader.com/variants/t6vc6L3mHdsECeQd1RQwWr57/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/openrc-4wd-touring-concept-rc-car-3d-model-stp.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/games-toys/toy/openrc-4wd-touring-concept-rc-car","isCgtVerified":true,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":72,"name":".stp","is_native":false}],"categorySlug":"games-toys","subcategorySlug":"toy","categoryTitle":"Games \u0026 Toys","subcategoryTitle":"Toys","schemaImageUrl":"https://img-new.cgtrader.com/items/121349/24452da012/openrc-4wd-touring-concept-rc-car-3d-model-24452da012.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"980602","type":"listingItem","attributes":{"id":980602,"title":"RC Bait boat for carpfishing","price":30.0,"description":"RC Bait boat for carpfishing.  \n Fishing rc boat 3D print model.  \n ideal for carpfishing.  \n Dimensions: 406mm x 283mm x 168mm.  \n Material for 3d printed: ABS  \n This file is a DIY RC boat.\n\n","imageAlt":"RC Bait boat for carpfishing bait 3D print model","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/rc-bait-boat-for-carpfishing","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/Kk8c7JTUsJhuKU8YACHnKomW/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/rc-bait-boat-for-carpfishing-3d-model-obj-mtl-stl.jpg","gridUrl":"https://media.cgtrader.com/variants/Kk8c7JTUsJhuKU8YACHnKomW/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/rc-bait-boat-for-carpfishing-3d-model-obj-mtl-stl.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/rc-bait-boat-for-carpfishing","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":12,"name":".obj","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/980602/7e4f307e4c/rc-bait-boat-for-carpfishing-3d-model-7e4f307e4c.webp","saleOffDiscount":50,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"premium"}},{"id":"2499925","type":"listingItem","attributes":{"id":2499925,"title":"RC Monster Truck Axle Rockwell Axle","price":0.0,"description":"This is an upgraded axle design made to resemble old military axles, rockwell 5 ton axles that were used on 1980's era Monster Trucks.  The files consist of a two piece axle casing, 2 piece hubs, and Suspension mounts for shocks and links and/or leaf springs.  I recently added a bracket to mount the servo behind the axle. To complete these axles you need the following parts.\n1. 5mm to 6mm aluminum shaft couplers https://www.ebay.com/itm/Shaft-Coupling-5mm-to-6mm-Bore-L20xD12-Robot-Motor-Wheel-Rigid-Coupler-Red-2-PCS/323735699060?hash=item4b6026be74:g:VJoAAOSwvXReqE79\n2. Traxxas Tmaxx 3.3 complete Differentials\n3. Kyosho Mad Crusher Hub Carriers (You will cut these to length), Knuckles and bearings, 17mm hubs, dog bones shafts (you will cut these to length), outer axle shafts\n4. JConcepts Tribute Wheels.  Designed to bolt wheel directly to printed hub using the 6 hole pattern and M3 screws.\n5. Width of axle with wheels installed is approximately the same width as a Tamiya TXT-2 and is adjustable to preference based on how short you cut the Hub Carriers.    ","imageAlt":"RC Monster Truck Axle Rockwell Axle 3D printable model","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/rc-monster-truck-axle-rockwell-axle","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/sVguamsULGj47qRCFG5WvAHP/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/20200510_183707.jpg","gridUrl":"https://media.cgtrader.com/variants/sVguamsULGj47qRCFG5WvAHP/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/20200510_183707.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/rc-monster-truck-axle-rockwell-axle","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/2499925/a1ad0376e6/rc-monster-truck-axle-rockwell-axle-3d-model-a1ad0376e6.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"5624519","type":"listingItem","attributes":{"id":5624519,"title":"Swamp Boat Air Boat RC","price":21.14,"description":"Swamp Boat Air Boat size is 562mm long, 235mm width, and 282mm height.\n\nThis is not a physical product. After purchase, you can download files and print on your own 3D printer.\n\nYou can assemble it with help from video - https://youtu.be/CVsDuhrBIMc\n\nPart and setting i use - https://docs.google.com/document/d/1ocYGPiYDc-TWiN1P14E0VKgVy3tzt2xdNmaIOvvifVE/edit?usp=sharing\n\nPrint volume minimum 225 x 225 x 250","imageAlt":"toys 3D print model Swamp Boat Air Boat RC","url":"https://www.cgtrader.com/3d-print-models/games-toys/toy/swamp-bash-air-boat-rc-af8d232f-6508-4ffa-bec4-2b8fe9ed1fb3","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/Unv2HLAZT7P1mNxbg1pv3brk/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/01.jpg","gridUrl":"https://media.cgtrader.com/variants/Unv2HLAZT7P1mNxbg1pv3brk/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/01.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/games-toys/toy/swamp-bash-air-boat-rc-af8d232f-6508-4ffa-bec4-2b8fe9ed1fb3","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":null,"name":null,"is_native":false}],"categorySlug":"games-toys","subcategorySlug":"toy","categoryTitle":"Games \u0026 Toys","subcategoryTitle":"Toys","schemaImageUrl":"https://img-new.cgtrader.com/items/5624519/62d0ae152b/swamp-boat-air-boat-rc-3d-model-62d0ae152b.webp","saleOffDiscount":0,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"premium"}},{"id":"5638596","type":"listingItem","attributes":{"id":5638596,"title":"Sidelight and rear light pods 1-10 RC accessory","price":0.0,"description":"These are original 1/10 scale functioning light pods. There are 11 different styles of light pods in 3 different sizes.\n\nThe 11 styles included are round, round conical, oval in 3 lengths, rectangular in 6 lengths with double and triple colour tones. Of the 11 light pod styles, there are small 3mm, large 3mm, and 5mm light pods, thus creating 33 variations of light pods to ensure the best fit for your rig!\n\nThe small and large 3mm light pods are designed to be resin printed in clear resin, they fit  3mm LEDs. While the 5mm light pods are designed to be also printed in clear resin, they fit the 5mm LEDs. While the LEDs do fit and stay in place with friction, it is recommended to secure the LEDs to the pods with hot glue or another non-permanent method/\n \nThese can be scaled up or down in your slicer to further fine tune for your fitting. Keep in mind the hole for the LED light will change as the print file is scaled larger or smaller.\n\nMore types of side and rear light pods, and front light pods are designed and will be released in the near future. Be sure to check back here from time to time.\n\nTo get these light pods to look as good as possible even when the LEDs are off, print them in clear resin, and hand paint them with translucent orange, red, or white model paint to imitate the lenses. Be sure to coat it off with thin layers of UV-proof clear spray.\n","imageAlt":"Sidelight and rear light pods 1-10 RC 3D printable model","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/sidelight-and-rear-light-pods-1-10-rc-accessory","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/RhN6kChR5kQhuSTiRZG9UnpC/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/sidelight-and-rear-light-pods-1-10-rc-accessory-3d-model-30f2c5a2ff.jpg","gridUrl":"https://media.cgtrader.com/variants/RhN6kChR5kQhuSTiRZG9UnpC/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/sidelight-and-rear-light-pods-1-10-rc-accessory-3d-model-30f2c5a2ff.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/sidelight-and-rear-light-pods-1-10-rc-accessory","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"automotive","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Automotive \u0026 Car parts","schemaImageUrl":"https://img-new.cgtrader.com/items/5638596/30f2c5a2ff/sidelight-and-rear-light-pods-1-10-rc-accessory-3d-model-30f2c5a2ff.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6307688","type":"listingItem","attributes":{"id":6307688,"title":"Schnellboot RC Model 1-48 Scale","price":25.0,"description":"1/48 scale RC model of the WWII era German Schnellboot (or \"S-Boat\") torpedo boat. I designed it to have a 4mm shaft tube, and 2.5mm rudder tubes. I have included a PDF of assembly instructions in the file.\n\nFor a quick preview and to check printer size compatibility, the following are the largest dimensions from all of the pieces: Biggest Length: 240mm, Biggest Width: 112mm, Biggest Height: 90mm.\n\nAt 1/48 scale, this model is roughly 720mm long, 262mm tall, and 112mm wide.\n\nI have not printed this plan personally yet, so if you run into any glaring issues please let me know and I will modify and directly send you corrected files as necessary.","imageAlt":"schnellboot Schnellboot RC Model 1-48 Scale","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/schnellboot-rc-model-1-48-scale","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/3guhsd46u2edssgev9vxxn12knm6/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Screenshot%202025-09-26%20091451.jpg","gridUrl":"https://media.cgtrader.com/variants/3guhsd46u2edssgev9vxxn12knm6/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Screenshot%202025-09-26%20091451.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/schnellboot-rc-model-1-48-scale","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6307688/8e6e821a1c/schnellboot-rc-model-1-48-scale-3d-model-8e6e821a1c.webp","saleOffDiscount":0,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"premium"}},{"id":"6114094","type":"listingItem","attributes":{"id":6114094,"title":"Magnet Coupling Experiment Amphibian RC Vehicle Basic Frame","price":0.0,"description":"A basic body/frame/steering mechanism for an experimental RC amphibian vehicle with completely sealed off wheels moved by magnets from the inside","imageAlt":"Magnet Coupling Experiment Amphibian 3D printable model 3","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/magnet-coupling-experiment-amphibian-rc-vehicle-basic-frame","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/3ib8im84xnvyrnyg7g7vi1mo1mm9/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/meshlab%202025-05-13%2023-27-52-04.jpg","gridUrl":"https://media.cgtrader.com/variants/3ib8im84xnvyrnyg7g7vi1mo1mm9/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/meshlab%202025-05-13%2023-27-52-04.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/magnet-coupling-experiment-amphibian-rc-vehicle-basic-frame","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":59,"name":".sldprt","is_native":false},{"id":51,"name":".stl","is_native":false},{"id":null,"name":null,"is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6114094/9a3e9b28fb/magnet-coupling-experiment-amphibian-rc-vehicle-basic-frame-3d-model-9a3e9b28fb.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6344714","type":"listingItem","attributes":{"id":6344714,"title":"Oliver Hazard Perry RC Model 1-96","price":25.0,"description":"This 1/96 scale model is based on the Oliver Hazard Perry class guided missile frigate (FFG.) Specifically, it’s based off of the configuration of my first ship FFG-49 USS Robert G. Bradely in it’s early 2000's configuration. (Hence the missing missile launcher.) It was also my very first attempt at 3D modeling. I’ve gone back with the skills I’ve developed over the past few months and attempted to edit it as best as I could without starting from scratch, but keep in mind that I didn’t know how supports worked at that time. It may not be the easiest to print, but I know it does work as a few of my friends have created successful test prints (even before the edits.)\n\nI tried to keep all pieces under 250mm for printing. The mast may need to be sliced a bit though.\n\nAt 1/96 scale, this model is roughly 1.45m long, 140mm wide, and 415mm tall.\n\nUpdate 1 (11/2/25): I added in the file I created to make a stand for the model (as pictured.) It is marked with USS ROBERT G. BRADLEY, but the nameplates can be reversed to the flat side to decal/paint on whichever name you want to use. There is an \"I\" marked on the stand front/back to indicate which sides should be facing \"inside.\"\nUpdate 2 (11/2/25): I received a request to make this a waterline model, so I am including a zip file of the hull pieces cut at the waterline. Assembly instructions/file numbers are still the same, just without everything from the WL below.","imageAlt":"Oliver Hazard Perry RC Model 1-96","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/oliver-hazard-perry-rc-model-1-96","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/5gof21q89a2zio5hr2tp5wbzfpnn/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Screenshot%202025-08-04%20225947.jpg","gridUrl":"https://media.cgtrader.com/variants/5gof21q89a2zio5hr2tp5wbzfpnn/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Screenshot%202025-08-04%20225947.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/oliver-hazard-perry-rc-model-1-96","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6344714/a4e6ecfbcf/oliver-hazard-perry-rc-model-1-96-3d-model-a4e6ecfbcf.webp","saleOffDiscount":0,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"premium"}},{"id":"5638631","type":"listingItem","attributes":{"id":5638631,"title":"Camp lamp square 1-10 RC accessory","price":0.0,"description":"This highly detailed 1/10 scale square camp lamp currently comes in 2 versions. A functional and non functional version.\n\nAll versions are a 2 piece print. The detailed heatsink and lens, and the battery pack. The functional version has grooves and a hole for a 3mm LED to be placed in the lamp, making it illuminate just like in real life. The non functional version does not have this groove and hole for a 3mm LED to fit though. But still features the super realistic heatsink, battery pack and mock rocker switch.\n\nThe functional version is designed to be printed in clear resin so light can shine through the lamp tube. It is also recommended to use a warm white type of 3mm LED to enhance realism.\n\nRescale is possible to fit your application, but do keep in mind that the hole diameter for the 3mm LED will change as you rescale.\n\nSame with all of our other print files, it is highly recommended to print only with a resin printer to achieve the maximum amount of details, and do remember to wear PPE.\n\nPost processing is the same with our other products. Use a spray primer depending on your resin type, then either spray paint or hand paint with model paints to your own liking. Top it off with thin coats of UV-proof clear spray. Feel free to use the renderings as an inspiration for your colour schemes!\n","imageAlt":"Camp lamp square 1-10 RC accessory 3D printable model","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/camp-lamp-square-1-10-rc-accessory","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/j7BeyQRUCP3466LMjSxT3t4G/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/camp-lamp-square-1-10-rc-accessory-3d-model-d097c477b1.jpg","gridUrl":"https://media.cgtrader.com/variants/j7BeyQRUCP3466LMjSxT3t4G/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/camp-lamp-square-1-10-rc-accessory-3d-model-d097c477b1.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/camp-lamp-square-1-10-rc-accessory","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"automotive","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Automotive \u0026 Car parts","schemaImageUrl":"https://img-new.cgtrader.com/items/5638631/d097c477b1/camp-lamp-square-1-10-rc-accessory-3d-model-d097c477b1.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"1877450","type":"listingItem","attributes":{"id":1877450,"title":"Drag Boat Pilot Bust","price":21.0,"description":"3D printable bust  \n\u003cbr\u003eCurrent Data Scale 1:6\u003c/p\u003e\n\n**Please note!\n\u003cbr\u003eAny printing results are up to the skill and equipment of the buyer.\n\u003cbr\u003eNo correspondence can be made on issues of customization of the scale and its printability.\n\u003cbr\u003eThe price of this high quality models is not negotiable.**\n\n**C U S T O M - S C A L I N G**\n\u003cbr\u003eHere is a step by step way to scale the models to your desired scale. \n\u003cbr\u003e**1.** Copy all models into one document and save it.\n\u003cbr\u003e**2.** Most of my 3D models have an initial scale of 1/6. Therefore scale up the whole content of this document with the factor 6.0 to the scale 1/1.\n\u003cbr\u003e **3.** Then scale the whole content from 1/1 to your estimated scale \n\u003cbr\u003eWithout guarantee - here is a helpful list of scaling factors for the most common scales:\n\n\u003cbr\u003e**1/1: factor 1 (initial factor)**\n\u003cbr\u003e1/2: factor 0.5\n\u003cbr\u003e1/3: factor 0.333\n\u003cbr\u003e1/4: factor 0.25\n\u003cbr\u003e1/5: factor 0.2\n\u003cbr\u003e1/6: factor 0.167\n\u003cbr\u003e1/7: factor 0.143\n\u003cbr\u003e1/8: factor 0.125\n\u003cbr\u003e1/9: factor 0.111\n\u003cbr\u003e1/10: factor 0.1\n\u003cbr\u003e1/12: factor 0.083\n\u003cbr\u003e1/16: factor 0.062\n\u003cbr\u003e1/18: factor 0.056\n\u003cbr\u003e1/20: factor 0.05\n\u003cbr\u003e1/22.5: factor 0.044\n\u003cbr\u003e1/24: factor 0.042\n\u003cbr\u003e1/25: factor 0.04\n\u003cbr\u003e1/30: factor 0.033\n\u003cbr\u003e1/32: factor 0.031\n\u003cbr\u003e1/35: factor 0.029\n\u003cbr\u003e1/45: factor 0.022\n\u003cbr\u003e1/48: factor 0.021\n\u003cbr\u003e1/50: factor 0.02\n\u003cbr\u003e1/55: factor 0.018\n\u003cbr\u003e1/72: factor 0.014\n\u003cbr\u003e1/87: factor 0.011\n\u003cbr\u003e1/110: factor 0.099\n\u003cbr\u003e1/125: factor 0.008\n\u003cbr\u003e1/144: factor 0.007\n","imageAlt":"Drag Boat Pilot Bust 3D print model","url":"https://www.cgtrader.com/3d-print-models/miniatures/figurines/drag-boat-pilot-bust","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/xLbapCuHF7tbGx41LskpjVBk/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/drag-boat-pilot-bust-3d-model-obj-mtl-stl.jpg","gridUrl":"https://media.cgtrader.com/variants/xLbapCuHF7tbGx41LskpjVBk/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/drag-boat-pilot-bust-3d-model-obj-mtl-stl.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/miniatures/figurines/drag-boat-pilot-bust","isCgtVerified":true,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":12,"name":".obj","is_native":false}],"categorySlug":"miniatures","subcategorySlug":"figurines","categoryTitle":"Miniatures","subcategoryTitle":"Action Figures \u0026 Statues","schemaImageUrl":"https://img-new.cgtrader.com/items/1877450/5d85e07f9b/drag-boat-pilot-bust-3d-model-5d85e07f9b.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"5817295","type":"listingItem","attributes":{"id":5817295,"title":"A completely new funny boat you can modify","price":0.0,"description":"A completely new funny boat you can modify, vaguely inspired by but not directly based on other funny boats","imageAlt":"A completely new funny boat you can modify 3D print model","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/a-completely-new-funny-boat-you-can-modify","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/83qJJzkbR8Q8QAoZKcASNaD3/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/meshlab%202025-01-27%2002-07-55-91.jpg","gridUrl":"https://media.cgtrader.com/variants/83qJJzkbR8Q8QAoZKcASNaD3/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/meshlab%202025-01-27%2002-07-55-91.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/a-completely-new-funny-boat-you-can-modify","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":59,"name":".sldprt","is_native":false},{"id":51,"name":".stl","is_native":false},{"id":null,"name":null,"is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/5817295/2b9af9adf7/a-completely-new-funny-boat-you-can-modify-3d-model-2b9af9adf7.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6810506","type":"listingItem","attributes":{"id":6810506,"title":"BK1124 Bronekater Soviet River Monitor RC Model","price":25.0,"description":"This model is based on the WWII era Soviet BK1124 “Bronekater” river monitor.  These boats were thrown together using parts available at the time, so many of them were different in appearance (from hull shape to spray rails to weapons.) So for you sticklers out there, this is MY take on the boat and may not be “perfect.” I am including 3 different types of armament as well that are interchangable: the T-34 tank turret, T-28 tank turret, and the Katyusha rocket launcher.\nThis model was designed by request, and the requested scales were 1/16, 1/24, and 1/35. The instructions cover all three, and all three scales are included.\n\nSince there are 3 scales, I had to cut the model up into smaller pieces for the 1/16 scale to accommodate a 250^3 print area. I sliced the 1/16 scale pieces in half (with connecting walls and alignment holes) to fit the same. You can see this in the last 2 pictures.\n\nDue to the low freeboard design of this model, I kept the deck intact with the hull with internal access via holes with coaming as requested. Since the internal access is limited, I opted to use angled flanges to fit hull pieces together as opposed to my usual bulkhead design. Running gear installation will likely need to happen during hull construction as opposed to after to maximize access. (At least on the 1/24 and 1/35 scales.) I also made a very generic motor mount, as I don’t know which motor you will want to use. The holes in the middle of the mount and the angles align directly with the shafts. \n\nOverall dimensions for each scale below (L,W,H):\n1/16: 1.6m, 255mm, 535mm\n1/24: 1.05m, 170mm, 357mm\n1/35: 722mm, 116.6mm, 245mm\n","imageAlt":"BK1124 Bronekater Soviet River Monitor RC Model","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/bk1124-bronekater-soviet-river-monitor-rc-model","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/070pxic56icpo7dezr79hem5t1qi/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Screenshot%202026-02-06%20211159.jpg","gridUrl":"https://media.cgtrader.com/variants/070pxic56icpo7dezr79hem5t1qi/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Screenshot%202026-02-06%20211159.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/bk1124-bronekater-soviet-river-monitor-rc-model","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":100,"name":".pdf","is_native":false},{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6810506/62f8278201/bk1124-bronekater-soviet-river-monitor-rc-model-3d-model-62f8278201.webp","saleOffDiscount":0,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"premium"}},{"id":"4778654","type":"listingItem","attributes":{"id":4778654,"title":"ParperBoat to 3dprint","price":0.0,"description":"ParperBoat to 3dprint\n\nSimple lowpoly model of a paper-boat\n\nSize : 120x61x45mm\n\nCura setting:\n\n- Layer = 0.2mm\n- Infill = 15%\n- Support = No need","imageAlt":"ParperBoat to 3dprint","url":"https://www.cgtrader.com/free-3d-print-models/house/decor/parperboat-to-3dprint","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/CrcUKeBxok9qwxjgNes9psX8/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/4.jpg","gridUrl":"https://media.cgtrader.com/variants/CrcUKeBxok9qwxjgNes9psX8/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/4.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/house/decor/parperboat-to-3dprint","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"house","subcategorySlug":"decor","categoryTitle":"Home \u0026 Living","subcategoryTitle":"Home decor","schemaImageUrl":"https://img-new.cgtrader.com/items/4778654/c7401e5513/parperboat-to-3dprint-3d-model-c7401e5513.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"3556276","type":"listingItem","attributes":{"id":3556276,"title":"RC fishing boat","price":59.0,"description":"Model is a typical north sea fishing trawler from 1970’s.\n\nBuilt:                          1970 in England\nTonnage:                  185 gross register tonnage\nLength overall:      50,0 m\nBeam:                       12,30 m\nMotor:                      1000 HP diesel\nEngine speed:       12-14 knots\nCrew:                         7-8 men\nFishing area:          Around Iceland and Greenland\nHaul:                         Herrings, cod and trash fish\n\n1/100 scale, the model dimensions are: 548 mm x 130 mm x 185 mm and Cura was the slicer.\nThe prototype was printed on a Anycubic 3d printer with 400 x 380 x 450mm build volume. \n\n_The instruction manual and 3D PDF files can be downloaded for free here for buyer inspection:_\n\nhttps://www.cgtrader.com/free-3d-print-models/hobby-diy/other/1-100-fishing-boat-rc-model-ship-instructions-3d-print-model\n\n\n\n**Components:**\n\n- - Brushless motor 12V 0.32A 150W 13000-15000RPM\n- - Water pump 370\n- - Battery 7.4V 600mAh\n- - Motherboard\n- - Servomotor LKY66-UK-5\n- - Transmission shaft m4\n- - 4X wood spine\n- - 6X insert m4\n- -1X bolt m4\n- -6X screw m4\n- -20X screw m2.5\n\n**Formats:**\n\n- Fusion 360 (native) - Fully editable\n- Keyshot pack with materials and lights\n- STEP\n- IGES\n- File zip include STL parts for 3D printing\n\nIf you have any kind of questions please contact me. And if you want check out my other models!","imageAlt":"3D print model travel RC fishing boat","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/rc-fishing-boat","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/fYRf17JhQ46EQ2rp32iCbb41/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Immagine%202022-03-16%20144717.jpg","gridUrl":"https://media.cgtrader.com/variants/fYRf17JhQ46EQ2rp32iCbb41/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Immagine%202022-03-16%20144717.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/rc-fishing-boat","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":107,"name":".f3d","is_native":false},{"id":149,"name":".bip","is_native":false},{"id":29,"name":".ige","is_native":false},{"id":72,"name":".stp","is_native":false},{"id":51,"name":".stl","is_native":false},{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/3556276/0c98ca4a33/rc-fishing-boat-3d-model-0c98ca4a33.webp","saleOffDiscount":50,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"3387612","type":"listingItem","attributes":{"id":3387612,"title":"Anchor 3D PRINT - 3D OBJECT","price":0.0,"description":"Contains next formats:\n- 3ds max (originally created)\n- OBJ\n- stl\n\nIf you need other file format ask us.\n\nDimensions of the object: \nX: 5,5cm\nY: 8 cm\nZ: 0,7 cm\n\nMaterials are not inclouded.\n\n**For any change or need don't hesitate asking :)**\n\nCheck out our other models as well as recommend any 3d model/ product you might be interested in purchasing.\n\nThanks! ","imageAlt":"Anchor 3D PRINT - 3D OBJECT model","url":"https://www.cgtrader.com/free-3d-print-models/jewelry/pendant/anchor-3d-print-3d-object","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/T3oAJ2LWQvwa8mJuR7T66hex/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/screenshot000.jpg","gridUrl":"https://media.cgtrader.com/variants/T3oAJ2LWQvwa8mJuR7T66hex/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/screenshot000.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/jewelry/pendant/anchor-3d-print-3d-object","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":17,"name":".max","is_native":true},{"id":12,"name":".obj","is_native":false},{"id":51,"name":".stl","is_native":false},{"id":5,"name":".fbx","is_native":false}],"categorySlug":"jewelry","subcategorySlug":"pendant","categoryTitle":"Jewelry","subcategoryTitle":"Pendants","schemaImageUrl":"https://img-new.cgtrader.com/items/3387612/fc8da0c50b/anchor-3d-print-3d-object-3d-model-fc8da0c50b.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"2292513","type":"listingItem","attributes":{"id":2292513,"title":"Boat Trailer for crawler or RC car","price":40.0,"description":"Boat trailer, customizable in length and width. For its construction you need 3 metric screws and 10x10mm square aluminum rod is recommended. You can also buy crawler wheels from 90 to 110mm. It has independent suspension on each wheel increasing the realism of the trailer. It has a manual winch with which you can hold the boat and introduce it directly into the water.\nIt can be printed on any 3D printer, using PLA, in the orientations shown in the images.\n\nYou can install the number of axes you want, depending on the ship to which it is intended. The length of the bars is adaptable to the boat you want.","imageAlt":"Boat Trailer for crawler or RC 3D print model","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/automotive/boat-trailer-for-crawler-or-rc-car","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/YYpXe1sZmoGmxEdWUyxupVa7/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/11.jpg","gridUrl":"https://media.cgtrader.com/variants/YYpXe1sZmoGmxEdWUyxupVa7/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/11.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/automotive/boat-trailer-for-crawler-or-rc-car","isCgtVerified":true,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":5,"name":".fbx","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"automotive","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Automotive \u0026 Car parts","schemaImageUrl":"https://img-new.cgtrader.com/items/2292513/5486aed78a/boat-trailer-for-crawler-or-rc-car-3d-model-5486aed78a.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"5638627","type":"listingItem","attributes":{"id":5638627,"title":"Copper cup 1-10 RC accessory","price":0.0,"description":"This super realistic, functional 1/10 scale overland copper cup comes in just 1 version.\n\nThe copper cup is actually designed based on a real life copper cup. Of course though, resin is not copper so it’ll be realistic to paint this in copper colour. It is functional too, so it does hold water without leaking. Be sure to get this with our “Overland water tank”, “Camp Kettle” and “Camp Stove”, so you can boil some scale water with the scale camp stove, pour the scale water out of the scale kettle, and brim your scale cup. Also if you want to pour scale hot water, you should definitely get our “Overland mug”.\n\nAs the “1/10” scale is more of a loose standard, feel free to scale up or down in your slicer to fit your own rig, if necessary. \n\nSame with all of our other print files, it is highly recommended to print only with a resin printer to achieve the maximum amount of details, and do remember to wear PPE.\n\nPost processing is the same with our other products. Use a spray primer depending on your resin type, then either spray paint or hand paint with model paints to your own liking. Top it off with thin coats of UV-proof clear spray.\n","imageAlt":"3D printable model Copper cup 1-10 RC accessory","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/copper-cup-1-10-rc-accessory","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/8XmLa3dcyaHSpkB3G91ca8HH/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/copper-cup-1-10-rc-accessory-3d-model-bd2f1b21e1.jpg","gridUrl":"https://media.cgtrader.com/variants/8XmLa3dcyaHSpkB3G91ca8HH/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/copper-cup-1-10-rc-accessory-3d-model-bd2f1b21e1.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/copper-cup-1-10-rc-accessory","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/5638627/bd2f1b21e1/copper-cup-1-10-rc-accessory-3d-model-bd2f1b21e1.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6457440","type":"listingItem","attributes":{"id":6457440,"title":"RC Center Console Fishing Boat","price":37.59,"description":"Center Console Boat size is around 780mm long, 225mm width, and 254mm height. This design is suitable for your 1/10 figure.\n\nThis not a physical product. After purchase, you can download files and print on your own 3D Printer.\n\nYou can assemble it with help from video - https://youtu.be/N_As0q4O1pc\n\nPart and setting i use - https://docs.google.com/document/d/1XNEun9uSCNql-Q3YX38TPK7NIJYLQ6egfndBJi2K2Gs/edit?usp=sharing\n\nPrint volume minimum 235 x 235 x 250 mm","imageAlt":"RC Center Console Fishing Boat 3D printable model","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/rc-center-console-fishing-boat-9f6d92b9-837f-4f61-8045-6cd685beb3b6","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/ghri7alz0x9tkmjlp50f9oah22sa/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/1-06.jpg","gridUrl":"https://media.cgtrader.com/variants/ghri7alz0x9tkmjlp50f9oah22sa/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/1-06.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/rc-center-console-fishing-boat-9f6d92b9-837f-4f61-8045-6cd685beb3b6","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":null,"name":null,"is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6457440/4095d1b911/rc-center-console-fishing-boat-3d-model-4095d1b911.webp","saleOffDiscount":0,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"premium"}},{"id":"5187514","type":"listingItem","attributes":{"id":5187514,"title":"Universal RC Controller","price":0.0,"description":"Universal RC Remote: command all your projects wirelessly with one powerful, custom-programmable device!\nFull project in PCBWay! https://www.pcbway.com/project/shareproject/Universal_RC_Controller_9683a6e6.html","imageAlt":"Universal RC Controller 3D print model","url":"https://www.cgtrader.com/free-3d-print-models/gadgets/other/universal-rc-controller","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/vKw8i1FzUFKYsJJ4BQwrbuzy/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/RC2.jpg","gridUrl":"https://media.cgtrader.com/variants/vKw8i1FzUFKYsJJ4BQwrbuzy/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/RC2.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/gadgets/other/universal-rc-controller","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"gadgets","subcategorySlug":"other","categoryTitle":"Gadgets","subcategoryTitle":"Other","schemaImageUrl":"https://img-new.cgtrader.com/items/5187514/f264b2a688/universal-rc-controller-3d-model-f264b2a688.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"2368560","type":"listingItem","attributes":{"id":2368560,"title":"M-Jet 30 - 3D Printable Jet Drive for RC Boats","price":18.0,"description":"Join the official M-Jet facebook group! https://www.facebook.com/groups/623045356071128\n\n**Full documentation, manual, part list, drawings:** https://drive.google.com/drive/folders/1JcEGcyh6E7lrhXk4kT1SKNdzvIaI_VNe?usp=drive_link\n\n**Hardware and electronics kit by RCPrinter:** https://rcprinter.com/products/m-jet-30-pump-build-kits\n\n**Note: This is not a physical product. After purchase, you can download computer files which you can use to manufacture your own parts on a 3D printer.**\n\nM-Jet 30 includes:\n\nSTL files for all parts of the assembly, designed to be FDM 3D printed, mostly with no supports.\n\nSTEP file for most of the assembly except for the pump (the pump is only included in the STL format).\n\nYou can 3D print it and assemble it with help of the manual, link above. You need to buy all electronics, screws and other necessary parts yourself - part list is in the manual, too.\n\nThe M-Jet 30 is a 3D printable jet pump for RC jetboats. It is a good match for hulls of size 35-55cm. The newest version of the M-Jet 30 introduces all key M-Jet features:\n\n- 2-stage configuration\n\n- Single blade impeller\n\n- 4-path nozzle with a quick-swap vertical trim\n\n- Rear installation\n\n**The M-Jet 30 is compatible with the following hulls:**\n\nRagnarok: https://www.cgtrader.com/free-3d-print-models/hobby-diy/other/ragnarok-3d-printable-rc-jetsprint-boat\n\nValkyrie: https://www.cgtrader.com/free-3d-print-models/hobby-diy/other/valkyrie-3d-printable-rc-jetski\n\n\nThe M-Jet 30 has the same internal pump geometry as the Supersprint and utilizes most of the same hardware and electronics. \n\n**You don't need the M-Jet 30 to build the Supersprint, and you don't need the Supersprint to build the M-Jet 30. These are separate systems.**\n\n**Performance:**\nThe M-Jet 30 achieves 5.3kg static thrust at 18.5m/s exit velocity, consuming 1315W from battery. This data comes from a static thrust test. \n\nUpdate log: till Septemer 2024 old M-Jet 30, since September 2024 new M-Jet 30.\n\nUpdate 10. 5. 2020: Two parts of the steering assembly, Ball and Servo coupler, were changed for better strength and grip on the steering shaft. \n\nUpdate 4.11.2020: These parts have been further reinforced.\n\nUpdate 18.1.2021: The \"M-Jet\" was renamed to \"M-Jet 30\". \n\nUpdate 14.9.2021: A new folder \"Mods_for_M-Jet_30\" was added to the files, including a **single blade impeller design mod**. It requires more testing on this pump, but was found to dramatically improve efficiency on a different pump.\n\nUpdate 13.11.2022: The model description was slightly updated.\n\nUpdate 18.1.2023: STL file for a single stage impeller (to make the pump work without first stage) was added into the mods folder. Steering shaft will not work properly and the impeller hub does not have the correct size, but it can be an interesting experiment for you to test.\n\nUpdate 3.6.2023: STEP file of the whole pump was added with the \"M-Jet_30_STEP_file\" folder.\n\nUpdate 11.05.2024: Modified parts (housing, ball and servo_coupler) that use threaded inserts instead of inserted M3 nuts were added into the M-Jet 30 folder. Threaded inserts are a preferred option instead of the older nut solution. Thanks to rc3dprinter for suggesting this modification.\n\nUpdate 05.09.2024: Brand new M-Jet 30 has been released, introducing all important M-Jet features developed over time. The new M-Jet 30 replaces the original M-Jet 30. The original M-Jet 30 stays available as old_M-Jet_30.\n\nFix 06.09.2024: Due to some issues, the M-Jet 30 has been reuploaded.\n\nFix 11.09.2024: Wrong dimension of the steering shaft (112mm) has been corrected to 110mm in the manual.\n\nFix 05.10.2024: Based on a report, KV selection for 28xx motors was designed too high and could lead to damaging the motor. Recommended KV for 28xx motors was reduced in the manual. No other changes.\n\nUpdate 16.11.2024: A motor mount with ESC holder for Bash Jet or other boats where this configuration is useful, was added to the mods folder. Thanks Bart for creating and sharing the design!\n\nUpdate 30.11.2024: A new version of the ESC mount for a Hobbywing 150A forthe  Valkyrie by Bart was added into the mods folder, thank you for your work.\n\nUpdate 12.05.2025: A new TPU shaft seal design by Fabien was added into the Mods folder. This can be used instead of the regular oil seal. Full watertight seal was achieved in a test run.\n\nReupload 03.07.2026: Reuploaded to be in a single folder.","imageAlt":"M-Jet 30 - 3D Printable Jet Drive for RC Boats","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/m-jet-3d-printable-jet-drive-for-rc-boats","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/JoDgQEA156hwFCPSU16f8Nju/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/02.jpg","gridUrl":"https://media.cgtrader.com/variants/JoDgQEA156hwFCPSU16f8Nju/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/02.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/m-jet-3d-printable-jet-drive-for-rc-boats","isCgtVerified":true,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":100,"name":".pdf","is_native":false},{"id":51,"name":".stl","is_native":false},{"id":7,"name":".dxf","is_native":false},{"id":215,"name":".png","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/2368560/22705c1825/m-jet-30-3d-printable-jet-drive-for-rc-boats-3d-model-22705c1825.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"5714742","type":"listingItem","attributes":{"id":5714742,"title":"RC CAR ROOF CARRIER DESIGN 3D PRINT MODEL","price":0.0,"description":"This is a detailed 3D model of an RC car roof carrier, designed for realism and functionality. Perfect for 3D printing enthusiasts and RC car hobbyists, this roof carrier features:\n\nClean and optimized design for easy 3D printing.\nCompact and lightweight structure suitable for most RC car models.\nHigh-quality details to ensure durability and aesthetic appeal.\nCustomizable dimensions to fit various RC car scales.\nThe model can be printed as a single piece or with slight modifications for assembly. Ideal for adding a functional and realistic touch to your RC car projects.\n\nFile Format: STL\nUsage: 3D printing, RC car accessories\n\nEnhance your RC car setup with this high-quality roof carrier design!","imageAlt":"RC CAR ROOF CARRIER DESIGN 3D PRINT MODEL rc","url":"https://www.cgtrader.com/free-3d-print-models/games-toys/toy/rc-car-roof-carrier-design","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/jhwJU5GXTYyERXNpTDjFX8yg/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/1.jpg","gridUrl":"https://media.cgtrader.com/variants/jhwJU5GXTYyERXNpTDjFX8yg/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/1.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/games-toys/toy/rc-car-roof-carrier-design","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"games-toys","subcategorySlug":"toy","categoryTitle":"Games \u0026 Toys","subcategoryTitle":"Toys","schemaImageUrl":"https://img-new.cgtrader.com/items/5714742/fd169ce8d7/rc-car-roof-carrier-design-3d-print-model-3d-model-fd169ce8d7.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"7083105","type":"listingItem","attributes":{"id":7083105,"title":"Panoko Jet Boat","price":30.0,"description":"The Panoko (Torrentfish) is a fish native to the fast flowing shallow river waters of New Zealand, home of the Jet boat.\n\n\nThis hull was based on the bigger river jet boats commonly found in the USA. It has great stability but also becomes agile when required with the appropriate application of steering and power.\nThis model is made up of over fifty individual parts excluding the M-jet 35 drive unit. When Completed the boat 672mm long, 245mm wide and 245mm tall.\n\n\nThis boat is designed exclusively to be powered by the M-Jet 35 drive unit. There is now an untested rear hull section for the M-Jet 30 included. The files for this unit need to be purchased separately or if you already own the M-Jet 35 file no further file purchases are needed.\nThe M-Jet files are available here on cgtrader,\n\n\nhttps://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/m-jet-35-3d-printable-jet-pump-for-rc-boats\n\n\nOnce downloaded you get all the files and instructions needed to complete the hull of the boat. Purchase of small parts ie. bolts, brass inserts, glues ect is required\nAll printed parts fit within a 220wx220dx240h mm print bed.\n\nRough filament requirement quantaties are as follows.\n- 3 main hull sections 850g\n- 4 main cabin pieces 130g\n- 3 cabin roof sections 100g\n- deck rails, cabin ladders and cabin locking nuts 50g\n- window trims and templates 85g\n- deck treads 50g\n- swim deck and treads 55g\n- lid bases 65g\n- lids (TPU) 100g\n- battery trays and internal mounts 125g\n\nI am a member of the M-Jet facebook page so if you have any questions join the page and look out for me.\n\nUpdate 17/5/2026. A rear section of the hull running the M-jet 30 has been added. This is a beta part and has not been tested or printed by myself.\n\nUpdate 22/5/2026. Front hull section minor revision to allow for better cabin fitment. If you have the first version of the files this can be fixed by filing/sander a radius the front corners of the hull to cabin interface as now pictured \n\nUpdate 30/5/2026. Stand designed by Joseph Clarke added \n\n\n","imageAlt":"Panoko Jet Boat","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/panoko-jet-boat","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/cga4mtxyq3w9269n63q98xw4z5y7/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/DSC_4383%281%29.jpg","gridUrl":"https://media.cgtrader.com/variants/cga4mtxyq3w9269n63q98xw4z5y7/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/DSC_4383%281%29.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/panoko-jet-boat","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":100,"name":".pdf","is_native":false},{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/7083105/6c64e35a44/panoko-jet-boat-3d-model-6c64e35a44.webp","saleOffDiscount":0,"eligibleForSubscription":true,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":"premium"}},{"id":"6482049","type":"listingItem","attributes":{"id":6482049,"title":"Speedboat 3D Model Realistic Decorative Vessel","price":0.0,"description":"A detailed 3D model of a speedboat, perfect for 3D printing, nautical decoration, and digital art projects.\nThis realistic model captures the design and features of a modern boat, making it ideal as a decorative piece, collectible, or digital asset.\nThe model is fully scalable to any size, suitable for small tabletop models, medium display pieces, or large statement sculptures.\n\nPerfect for:\n\nHome and office nautical decoration\n\nCollectibles and marine-themed displays\n\nDigital art, animation, and game design\n\n3D printing and props","imageAlt":"Speedboat 3D Model Realistic Decorative Vessel","url":"https://www.cgtrader.com/free-3d-print-models/art/sculpture/speedboat-3d-model-realistic-decorative-vessel","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/ce9poqshjtsxnekz6ut8sm73j3x3/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Sin%20t%C3%ADtulo2.jpg","gridUrl":"https://media.cgtrader.com/variants/ce9poqshjtsxnekz6ut8sm73j3x3/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Sin%20t%C3%ADtulo2.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/art/sculpture/speedboat-3d-model-realistic-decorative-vessel","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":12,"name":".obj","is_native":false}],"categorySlug":"art","subcategorySlug":"sculpture","categoryTitle":"Art \u0026 Design","subcategoryTitle":"Sculptures","schemaImageUrl":"https://img-new.cgtrader.com/items/6482049/c1784e366b/speedboat-3d-model-realistic-decorative-vessel-3d-model-c1784e366b.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"7000731","type":"listingItem","attributes":{"id":7000731,"title":"HMS Belfast 3D printed RC working model Town Class Cruiser","price":70.0,"description":"These files will enable you to build a 3D working RC model of the famous British cruiser HMS Belfast, nowadays a museum ship on the River Thames in London.  At 1/96th scale she will be an impressive 1950mm long but she can just as easily be built at a smaller scale and still be an impressive working model.  She is designed to be built on a filament printer with a bed of 220mm cubed.\n\nThe original ship the last of the ten Town class cruisers, and the largest and most powerful of the class was completed just before WW2 and within months of launching had been seriously damaged after hitting a mine in the North Sea.  She was in dry dock being repaired for the nexty two years before serving in the D-Day landings and in the Arctic convoys to Russia, and then in the Far East.  In the 1950s she was in the Korean War.  In 1959 she received a major refit and the model represents the ship in its final form, in which she was preserved on the River Thames.\n\nAs a model although she has four propellor shafts, only the inner two are powered, giving plenty of power and manoeuvrability for the model.  There is plenty of access to batteries, motors and radio gear.  She needs around six kilograms of ballast to bring her to her waterline.  She works well, looking very impressive on the water, is very stable even in windy conditions.\n\nA full set of build instructions are provided that can be viewed for free  so that you can see what is involving in building this model before you buy.  Click this link.....  https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/hms-belfast-3d-printed-rc-working-model-build-instructions","imageAlt":"HMS Belfast 3D printed RC working model Town Class","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/hms-belfast-3d-printed-rc-working-model-battleship","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/8xgejtd9i5puryuzgo9fc431sdgl/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/belff.jpg","gridUrl":"https://media.cgtrader.com/variants/8xgejtd9i5puryuzgo9fc431sdgl/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/belff.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/hms-belfast-3d-printed-rc-working-model-battleship","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/7000731/5b77243996/hms-belfast-3d-printed-rc-working-model-town-class-cruiser-3d-model-5b77243996.webp","saleOffDiscount":50,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"5884867","type":"listingItem","attributes":{"id":5884867,"title":"Octobenchy","price":0.0,"description":"This is a remixed version of the classic 3D Benchy, now caught in the grip of a terrifying octopus attack! The monstrous kraken wraps its twisting tentacles around the iconic boat, creating a dramatic and adventurous twist on the original design. Perfect for those who love nautical themes, sea monsters, or just want a more exciting version of the classic test print.\n\nThis remix retains the printability and calibration benefits of the original Benchy while adding a fun, decorative touch. The tentacles feature smooth, organic curves designed for an impressive look while still being 3D-printer-friendly. While it can be printed without supports, using them for the tentacle overhangs may improve quality.\n\nWhether used for display, functional calibration, or as a unique conversation piece, this Kraken Benchy is sure to stand out. Try printing it in different colors or even dual extrusion to make the tentacles pop!\n\nSet sail… if you dare!","imageAlt":"Octobenchy 3D print model","url":"https://www.cgtrader.com/free-3d-print-models/art/sculpture/octobenchy","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/ms8o1qWbusb8d7t2g1DDi6xR/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/OctoBenchy%207.jpg","gridUrl":"https://media.cgtrader.com/variants/ms8o1qWbusb8d7t2g1DDi6xR/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/OctoBenchy%207.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/art/sculpture/octobenchy","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":5,"name":".fbx","is_native":false},{"id":51,"name":".stl","is_native":false},{"id":12,"name":".obj","is_native":false}],"categorySlug":"art","subcategorySlug":"sculpture","categoryTitle":"Art \u0026 Design","subcategoryTitle":"Sculptures","schemaImageUrl":"https://img-new.cgtrader.com/items/5884867/7ec5b25e83/octobenchy-3d-model-7ec5b25e83.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"2037725","type":"listingItem","attributes":{"id":2037725,"title":"48th scale Remote Controlled Armidale Class Patrol Boat","price":49.0,"description":"Reduced scale to fit 250x250x250 print size! STLs with multiple pieces will have to be sliced into individual pieces to fit, but the big sections will fit inside 250x250x250.\n\n3d printable RC ready Armidale Class Patrol Boat (UPDATED HULL AND DETAILING). - High level of detail \u0026 realistic accuracy with full set of assembly instructions provided. Massive 1/48th scale model, - 1.2M in length. - All STL files and 1 PDF assembly instruction manual.\n\nNot for resale or distribution. All rights reserved by BernCo Models, Australia.","imageAlt":"3D print model 48th scale Remote Controlled Armidale 2","url":"https://www.cgtrader.com/3d-print-models/games-toys/other/48th-scale-remote-controlled-armidale-class-patrol-boat","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/fEAMDiyagYvvDqMdJatHDfcc/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/IMG_3748.jpg","gridUrl":"https://media.cgtrader.com/variants/fEAMDiyagYvvDqMdJatHDfcc/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/IMG_3748.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/games-toys/other/48th-scale-remote-controlled-armidale-class-patrol-boat","isCgtVerified":true,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":100,"name":".pdf","is_native":false}],"categorySlug":"games-toys","subcategorySlug":"other","categoryTitle":"Games \u0026 Toys","subcategoryTitle":"Other","schemaImageUrl":"https://img-new.cgtrader.com/items/2037725/2a3a417d7c/48th-scale-remote-controlled-armidale-class-patrol-boat-3d-model-2a3a417d7c.webp","saleOffDiscount":70,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"premium"}},{"id":"5638593","type":"listingItem","attributes":{"id":5638593,"title":"Water cube 1-10 RC accessory","price":0.0,"description":"The water cube comes in 4 different versions. Logo and non-logo, as well as indicated and non indicated.\n\nThe difference between the logo and non-logo versions is that one has the extruded logo, while the other does not have the logo. The indicated version includes both the logo and non logo options, while the non indicated version does not have the logo. The indicated version has the water level markers on its side. The non indicated version does not have markings.\n\nIt is recommended to print with clear resin for or white tinted clear resin to look as realistic as possible!\n\nAs the “1/10” scale is more of a loose standard, feel free to scale up or down in your slicer to fit your own rig, if necessary. \n\nSame with all of our other print files, it is highly recommended to print only with a resin printer to achieve the maximum amount of details, and do remember to wear PPE.\n","imageAlt":"3D printable model Water cube 1-10 RC accessory","url":"https://www.cgtrader.com/free-3d-print-models/miniatures/other/water-cube-1-10-rc-accessory","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/L4jmc7CsNou1ThhmQvwBSsQc/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/water-cube-1-10-rc-accessory-3d-model-7b2df0fc3e.jpg","gridUrl":"https://media.cgtrader.com/variants/L4jmc7CsNou1ThhmQvwBSsQc/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/water-cube-1-10-rc-accessory-3d-model-7b2df0fc3e.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/miniatures/other/water-cube-1-10-rc-accessory","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"miniatures","subcategorySlug":"other","categoryTitle":"Miniatures","subcategoryTitle":"Other","schemaImageUrl":"https://img-new.cgtrader.com/items/5638593/7b2df0fc3e/water-cube-1-10-rc-accessory-3d-model-7b2df0fc3e.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6428211","type":"listingItem","attributes":{"id":6428211,"title":"USS San Pablo - The Sand Pebbles - RC Model 1-48","price":25.0,"description":"This 1/48 scale model is based on the fictional US Navy river gunboat “USS San Pablo” from the movie “The Sand Pebbles.” It is a 1920’s era steam (or “stim”) river boat that was serving in China. As a head’s up, I initially modeled this at 1/96 scale, but decided to double it at the end to 1/48. I normally make my hull thickness around 2mm, but because of the increase at the end it will be thicker. (However if you scale it down, your thickness should still be good to print and not too thin/brittle!) You will also notice that I left off the handrails and canvas covers. These would be very small and (in the case of the canvas covers) difficult for me to design, so I’ll leave those details in the hands of you skilled modelers out there!\n\nI tried to keep all pieces under 250mm for printing. Some slicing may be required though.\n\nAt 1/48 scale, this model is about 950mm long, 158mm wide, and 450mm tall.\n\nDue to website restrictions on naming conventions, some of the file names may not match up perfectly with the original list in the instruction booklet. The numbers will still match though.\n\nEdit 1 (1/27/26): I had few requests for a stand, so I whipped one up real quick and added it in. Remember that the \"F\" and \"A\" for foreward and aft go towards the inside.","imageAlt":"USS San Pablo - The Sand Pebbles - RC Model 1","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/uss-san-pablo-the-sand-pebbles-rc-model-1-48-117ca01a-d025-4111-86d7-23b0efa793be","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/fwl1075t686yfx7v8o8ekwmd0d4n/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Screenshot%202025-09-06%20162026.jpg","gridUrl":"https://media.cgtrader.com/variants/fwl1075t686yfx7v8o8ekwmd0d4n/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Screenshot%202025-09-06%20162026.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/uss-san-pablo-the-sand-pebbles-rc-model-1-48-117ca01a-d025-4111-86d7-23b0efa793be","isCgtVerified":true,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6428211/cd58424173/uss-san-pablo-the-sand-pebbles-rc-model-1-48-3d-model-cd58424173.webp","saleOffDiscount":0,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"premium"}},{"id":"4257573","type":"listingItem","attributes":{"id":4257573,"title":"FREE HEX 12MM D52mm RC Wheels SSR MK1 with and without tires","price":0.0,"description":"52mm, 12MM HEX RC Wheels SSR MK1's with and without tires:\n\nFree wheel, recomended to use to ensure fitment of any other 52mm wheel in my portfolio as well as calculate the desired offset for custom inquiries.\n\nSpecs:\n\n- Wheel Diameter: 52mm\n- Tire Diameter: 64mm\n- Width: 25mm\n- Offset: +4.5mm\n- Hub size: 12mm HEX\n- Axle hole: 5mm\n\n\nIf you need me to change the dimentions or scale on the model to suit your car message me.\n\nContents: available with and without tires. All models are available in OBJ, STL and 3MF.\n\nIf you encounter fitment issues after purchasing the file, message me and I will send you a new revised file/s that delivers adequate fitment (Issues with fitment caused by an inadequate offset selection are not subject to this clause)\n\nPlease note these models are not for comertial use.","imageAlt":"3D print model FREE HEX 12MM D52mm RC Wheels SSR MK1 3","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/free-hex-12mm-d52mm-rc-wheels-ssr-mk1-with-and-without-tires","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/b9l72gexkibmk2mxb1saop0e9ase/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/free-hex-12mm-d52mm-rc-wheels-ssr-mk1-with-and-without-tires-3d-model-87700cdae2.jpg","gridUrl":"https://media.cgtrader.com/variants/b9l72gexkibmk2mxb1saop0e9ase/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/free-hex-12mm-d52mm-rc-wheels-ssr-mk1-with-and-without-tires-3d-model-87700cdae2.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/free-hex-12mm-d52mm-rc-wheels-ssr-mk1-with-and-without-tires","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":12,"name":".obj","is_native":false},{"id":51,"name":".stl","is_native":false},{"id":129,"name":".3mf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/4257573/87700cdae2/free-hex-12mm-d52mm-rc-wheels-ssr-mk1-with-and-without-tires-3d-model-87700cdae2.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"2355449","type":"listingItem","attributes":{"id":2355449,"title":"RC Jet Boat","price":12.0,"description":"**NEW UPDATE!!**\nThe **Version 1.2** contains an important improvement of the hull, in fact some flaps have been added to give the model greater stability during navigation.\n\nThis project concerns the construction of an RC Racing Boat with jet propulsion engine.\nThere are eight printable parts and they can be printed on any 3D printer with FDM or SLA technology.\nThe recommended materials for printing the parts are ABS, PLA or resin.\nEach part can be printed without support, preferred nozzle diameter is 0.4mm, layer height from 0.15mm up to 0.21mm.\nPrinted parts:\nNo. 1 x Body 1 \n\nNo. 1 x Body 2 \n\nNo. 1 x Body 3 \n\nNo. 1 x Top Body \n\nNo. 1 x Jet Support 1 \n\nNo. 1 x Jet Support 2 \n\nNo. 1 x Propeller \n\nNo. 1 x Rod \n\nThe following commercial components are needed to complete the RC model:\n\nNo. 1 x Aluminium CNC Motor Jaw Shaft Coupler 3 x 3mm \n\nNo. 1 x RC Stainless Steel Rod shaft Linear Rail Round Shaft Length 150mm Ø3mm \n\nNo. 1 x Teflon tube for 3D printer Ø3mm \n\nNo. 1 x A2212 Brushless Ourunner Motor  1400KV \n\nNo. 1 x ESC 30A \n\nNo. 1 x Servo SG90 \n\nNo. 1 x Power LiPo Battery 11.1V 1500Mah 3S ","imageAlt":"RC Jet Boat 3D printable model electronics","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/electronics/rc-jet-boat","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/7XBzp6ZPfQCNmDcWsWDt5a5v/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/108.jpg","gridUrl":"https://media.cgtrader.com/variants/7XBzp6ZPfQCNmDcWsWDt5a5v/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/108.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/electronics/rc-jet-boat","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"electronics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Electronics","schemaImageUrl":"https://img-new.cgtrader.com/items/2355449/86ca069d94/rc-jet-boat-3d-model-86ca069d94.webp","saleOffDiscount":30,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"premium"}},{"id":"5638592","type":"listingItem","attributes":{"id":5638592,"title":"Water tank type 1 1-10 RC accessory","price":0.0,"description":"This original 1/10 scale water tank type 1 comes in 3 versions. Logo and non logo. And a variant of the same water tank with handles. \n\nAll versions are a 2 piece print. This includes the water tank body and the tap. 1 of the chosen water tank and 2 of the taps will be needed for the kit to be complete.\n\nThe design of the body has 2 holes that will allow water taps to be plugged in. These have a light friction fit and can be in place with super glue or hot glue. \n\nThere is also another type of water tank (print files sold separately) (water tank type 2) with a different body style which makes it unique. Both type 1 and type 2 water tanks will allow fitting of the same water tap. Both types of water tanks will look really good when matched with an overland type vehicle.\n\nThe water tank and tap can be scaled up or down depending on your specs. But both tank body and taps will need to be scaled at the same time and at the same size to ensure proper fitting of the tap.\n\nIt is also recommended that the tap is printed with a resin printer as the size itself will be a struggle for filament printers to print. The tank itself however can be printed with filament printers, although resin is still recommended.\n\nPost processing is the same with our other products. Use a spray primer depending on your resin type, then either spray paint or hand paint with model paints to your own liking. Top it off with thin coats of UV-proof clear spray.\nTo get the logo’s background to a different colour, it is recommended to first spray a layer of your desired paint, then hand paint the rest. Remember to spray UV-proof clear coats at the end. Feel free to use the renderings as an inspiration for your colour schemes!\n","imageAlt":null,"url":"https://www.cgtrader.com/free-3d-print-models/miniatures/other/water-tank-type-1-1-10-rc-accessory","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/PxMmfo9CHhVy3PR5pbzNwzrd/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/water-tank-type-1-1-10-rc-accessory-3d-model-d1a5e8644d.jpg","gridUrl":"https://media.cgtrader.com/variants/PxMmfo9CHhVy3PR5pbzNwzrd/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/water-tank-type-1-1-10-rc-accessory-3d-model-d1a5e8644d.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/miniatures/other/water-tank-type-1-1-10-rc-accessory","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"miniatures","subcategorySlug":"other","categoryTitle":"Miniatures","subcategoryTitle":"Other","schemaImageUrl":"https://img-new.cgtrader.com/items/5638592/d1a5e8644d/water-tank-type-1-1-10-rc-accessory-3d-model-d1a5e8644d.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6765908","type":"listingItem","attributes":{"id":6765908,"title":"USS Hughes DD 410 - Sims Class Destroyer - RC Model 1-96 Scale","price":25.0,"description":"This 1/96 scale model is based on archival drawings of the Sims class destroyer USS Hughes (DD 410), and so may look slightly different to pictures found online. USS Hughes saw service in the Pacific fleet for the entirety of WWII, with a break near the end of several months for repairs following a kamikaze attack. She earned 14 battle stars for her service in the war, and after decommissioning was used as a target for atomic testing before being sunk.\n\nI tried to keep all pieces under of 250mm for printing. Overall, this model is roughly 1.1m long, 95 mm wide, and 320mm tall at 1/96 scale.\n\nOne change I’ve made on this model is to design support channels under the main deck for an 8mm carbon fiber rod for rigidity and support of a single piece deck to remove for inner hull access.\n\nI plan to get printing on this model immediately, but if you beat me to it and find any issues please don't hesitate to reach out and I will make and upload corrections.","imageAlt":"USS Hughes DD 410 - Sims Class Destroyer - RC Model 1","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/uss-hughes-dd-410-sims-class-destroyer-rc-model-1-96-scale","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/pkcagwprtafzew0u598ymdyom02y/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Screenshot%202026-01-19%20151645.jpg","gridUrl":"https://media.cgtrader.com/variants/pkcagwprtafzew0u598ymdyom02y/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Screenshot%202026-01-19%20151645.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/uss-hughes-dd-410-sims-class-destroyer-rc-model-1-96-scale","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6765908/3c4d85321e/uss-hughes-dd-410-sims-class-destroyer-rc-model-1-96-scale-3d-model-3c4d85321e.webp","saleOffDiscount":0,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"premium"}},{"id":"121362","type":"listingItem","attributes":{"id":121362,"title":"OpenRC 4WD Truggy Concept RC Car","price":0.0,"description":"\u003cp\u003eAwarded a GrabCAD Golden Gear for \"Top Open Engineering Project 2013\"!\u003cbr\u003e\r\nThis an ongoing project of creating a free for all Open Source RC car that can be printed (to a certain extent of course) at your personal FDM printer at home!\u003cbr\u003e\r\nI have tried to keep the design basic for easy modification for others in their favourite CAD software \u003cbr\u003e\r\nAlso, it's designed for FDM 3D printing.\u003cbr\u003e\r\nThis is really a proof of concept and i´m very pleased with the result even if there is some work left to be done!\u003cbr\u003e\r\nJoin the discussion over at Google+: \u003ca href=\"https://plus.google.com/u/0/communities/112745535856143176146\" rel=\"nofollow\"\u003ehttps://plus.google.com/u/0/communities/112745535856143176146\u003c/a\u003e\u003cbr\u003e\r\nIntroduction video: \u003ca href=\"http://youtu.be/5mPUtSrMoLw\" rel=\"nofollow\"\u003ehttp://youtu.be/5mPUtSrMoLw\u003c/a\u003e\u003cbr\u003e\r\nTest drive video: \u003ca href=\"http://youtu.be/uBReuPsthDw\" rel=\"nofollow\"\u003ehttp://youtu.be/uBReuPsthDw\u003c/a\u003e\u003cbr\u003e\r\n\u003ca href=\"http://youtu.be/0sfKXO0QP7w\" rel=\"nofollow\"\u003ehttp://youtu.be/0sfKXO0QP7w\u003c/a\u003e\u003c/p\u003e","imageAlt":"3D printable model OpenRC 4WD Truggy Concept RC","url":"https://www.cgtrader.com/free-3d-print-models/games-toys/toy/openrc-4wd-truggy-concept-rc-car","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/efptq5FrnH6LHP54VE4taDke/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/openrc-4wd-truggy-concept-rc-car-3d-model-stl-stp.jpg","gridUrl":"https://media.cgtrader.com/variants/efptq5FrnH6LHP54VE4taDke/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/openrc-4wd-truggy-concept-rc-car-3d-model-stl-stp.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/games-toys/toy/openrc-4wd-truggy-concept-rc-car","isCgtVerified":true,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":100,"name":".pdf","is_native":false},{"id":72,"name":".stp","is_native":false},{"id":4,"name":".dwg","is_native":false},{"id":null,"name":null,"is_native":false}],"categorySlug":"games-toys","subcategorySlug":"toy","categoryTitle":"Games \u0026 Toys","subcategoryTitle":"Toys","schemaImageUrl":"https://img-new.cgtrader.com/items/121362/4ec215733b/openrc-4wd-truggy-concept-rc-car-3d-model-4ec215733b.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6491798","type":"listingItem","attributes":{"id":6491798,"title":"Keenoma Tug RC Model 1-20","price":25.0,"description":"This 1-20* scale tug is my interpretation of the 1950/60’s drawing by Vic Smeed from Model Maker magazine. (*Since it’s not based on an actual boat, the scale is estimated.) It was called the “Keenoma,” and the shape was inspired by a real Canadian tug.  I have added several details, but the modeler will be able to add as much detail as desired to this simple design.\n\nI tried to keep all pieces under 250mm for printing. Some slicing may be required though.\n\nAt 1/20 scale, this model is about 1.2m long, 255mm wide, and 484mm tall with 43 files +instructions. (Some are printed in duplicate.) As always, let me know if you find anything that can be improved and I'll get the updates out.","imageAlt":"rc Keenoma Tug RC Model 1-20","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/keenoma-tug-rc-model-1-20","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/61lum66xyfbo67loafual0avys7p/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Screenshot%202025-10-04%20130857.jpg","gridUrl":"https://media.cgtrader.com/variants/61lum66xyfbo67loafual0avys7p/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Screenshot%202025-10-04%20130857.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/keenoma-tug-rc-model-1-20","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6491798/151f7d675e/keenoma-tug-rc-model-1-20-3d-model-151f7d675e.webp","saleOffDiscount":0,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"premium"}},{"id":"4697137","type":"listingItem","attributes":{"id":4697137,"title":"A-FRAME SUPPORT REPLACEMENT FOR MT2 NITRO RC","price":0.0,"description":"Simple replacement for the a-frame with just the basic shape/cut outs and holes for it to work.\n\nNo supports required, printed on Ender 3 at 20% infill","imageAlt":"A-FRAME SUPPORT REPLACEMENT FOR MT2 NITRO 3D print model 1","url":"https://www.cgtrader.com/free-3d-print-models/games-toys/other/a-frame-support-replacement-for-mt2-nitro-rc","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/Zz128CL2HwYKKdnUhdmLfwSX/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/A-frame%20support%20replacement%20for%20MT2%20Nitro%20RC.jpg","gridUrl":"https://media.cgtrader.com/variants/Zz128CL2HwYKKdnUhdmLfwSX/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/A-frame%20support%20replacement%20for%20MT2%20Nitro%20RC.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/games-toys/other/a-frame-support-replacement-for-mt2-nitro-rc","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"games-toys","subcategorySlug":"other","categoryTitle":"Games \u0026 Toys","subcategoryTitle":"Other","schemaImageUrl":"https://img-new.cgtrader.com/items/4697137/c3eb127fc0/a-frame-support-replacement-for-mt2-nitro-rc-3d-model-c3eb127fc0.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"7137589","type":"listingItem","attributes":{"id":7137589,"title":"Fish boat full scale RC 890mm","price":16.0,"description":"Fish boat full scale 2 pieces only ! \nOptimized for Kobra 3 MAX Anycubic\nneeds assembly ready to be RC.\n890mm length \n367mm width \n340mm height ","imageAlt":"Fish boat full scale RC 890mm","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/fish-boat-full-scale-rc","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/hje7nhhpiwaok2c64p95wc7ipwmz/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Gemini_Generated_Image_j0r0vej0r0vej0r0.jpg","gridUrl":"https://media.cgtrader.com/variants/hje7nhhpiwaok2c64p95wc7ipwmz/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Gemini_Generated_Image_j0r0vej0r0vej0r0.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/fish-boat-full-scale-rc","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":129,"name":".3mf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/7137589/9fb1a905b9/fish-boat-full-scale-rc-890mm-3d-model-9fb1a905b9.webp","saleOffDiscount":50,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":"premium"}},{"id":"2163249","type":"listingItem","attributes":{"id":2163249,"title":"PROPELLER AP-PR-001-2LH","price":0.0,"description":"Propeller of 150 [mm] in diameter for RC plane. This is Left-hand propeller with blade design AP-PR-001. (see attached drawing for blade and hub design)\n\nContent:\n\nLeft-Hand rotation:\n\n- 2 blades propeller (*.stl; *.stp; *.igs)\n- 3x models in total\n- 1x drawing\n\n-------------------------------------------------------------------------------------------------------------\nPlease fill attached form if You would like to order bespoke propeller design.\n-------------------------------------------------------------------------------------------------------------","imageAlt":"3D printable model PROPELLER AP-PR-001-2LH","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/mechanical-parts/propeller-ap-pr-001-2lh","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/kVctgnCKHs4bVQrqeQMu3QBy/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/AP-PR-001-2RH_02.jpg","gridUrl":"https://media.cgtrader.com/variants/kVctgnCKHs4bVQrqeQMu3QBy/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/AP-PR-001-2RH_02.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/mechanical-parts/propeller-ap-pr-001-2lh","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":29,"name":".ige","is_native":false},{"id":72,"name":".stp","is_native":false},{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"mechanical-parts","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Mechanical parts","schemaImageUrl":"https://img-new.cgtrader.com/items/2163249/0b656ae694/propeller-ap-pr-001-2lh-3d-model-0b656ae694.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"7018504","type":"listingItem","attributes":{"id":7018504,"title":"Ton Class Minesweeper 1m RC Ready","price":34.9,"description":"3D model description\nThe Ton-class minesweepers were among the most numerous and widely used small naval vessels of the post-war era. Developed by the Royal Navy in the 1950s, these wooden-hulled ships were specifically designed to counter naval mines while minimizing magnetic signature. Their compact size, excellent maneuverability, and reliable diesel propulsion made them ideal for coastal operations. Over time, the class proved highly adaptable—serving not only in mine countermeasure roles but also as patrol craft, survey vessels, and training ships. Many were exported or transferred to allied navies, where they continued long service lives, making the Ton-class one of the most successful and enduring small warship designs of its generation.\n\nThis 3D printable model captures the character and proportions of the Ton-class in a 1 meter long, highly detailed format, combining historical accuracy with practical design. The file pack includes a large number of optional accessories and deck details, allowing builders to represent different configurations and levels of realism. At the same time, the core hull and structure remain straightforward and modular, enabling a clean and relatively simple base build. Builders can choose to assemble a minimal version quickly or progressively enhance the model using the included parts, making it suitable for both efficient builds and highly detailed projects.\n\n3D printing settings\nThis updated version of the model is now fully RC-ready, with the hull and internal structure specifically engineered to support functional conversion. The interior is hollow and organized to accommodate motors, propeller shafts, rudder systems, batteries, and onboard electronics, while maintaining structural integrity. Dedicated mounting areas, alignment features, and accessible internal geometry simplify installation and reduce guesswork during the build process. Removable deck sections provide practical access to the interior, making maintenance and upgrades straightforward.\n\nAll parts are optimized for standard desktop 3D printers, with a modular breakdown that ensures manageable print sizes and reliable assembly. Structural components are robust and easy to align, while smaller details can be added as desired. Whether built as a display model or developed into a fully operational RC vessel, this Ton-class minesweeper offers a balanced combination of historical authenticity, mechanical functionality, and builder-friendly design.\n\nFree sea panorama for previewing and Full color 3MF file format is also included in the pack. STL files (over 100 in total) are zipped for easier download.","imageAlt":"Ton Class Minesweeper 1m RC Ready 3D print model","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/ton-class-minesweeper-1m-rc-ready","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/c9pjnsls01ehi751i1alp7tld5l7/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/00.jpg","gridUrl":"https://media.cgtrader.com/variants/c9pjnsls01ehi751i1alp7tld5l7/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/00.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/ton-class-minesweeper-1m-rc-ready","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":129,"name":".3mf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/7018504/ee56ec5feb/ton-class-minesweeper-1m-rc-ready-3d-model-ee56ec5feb.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"826077","type":"listingItem","attributes":{"id":826077,"title":"Zodiac outboard","price":0.0,"description":"Lancha fueraborda","imageAlt":"3D print model Zodiac outboard","url":"https://www.cgtrader.com/free-3d-print-models/gadgets/other/zodiac-outboard","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/8PLEEDzYUYHhx9U7gPcgvket/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/zodiac-outboard-3d-model-obj.jpg","gridUrl":"https://media.cgtrader.com/variants/8PLEEDzYUYHhx9U7gPcgvket/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/zodiac-outboard-3d-model-obj.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/gadgets/other/zodiac-outboard","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":12,"name":".obj","is_native":false}],"categorySlug":"gadgets","subcategorySlug":"other","categoryTitle":"Gadgets","subcategoryTitle":"Other","schemaImageUrl":"https://img-new.cgtrader.com/items/826077/1b6fc3b622/zodiac-outboard-3d-model-1b6fc3b622.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6797260","type":"listingItem","attributes":{"id":6797260,"title":"Tupolev G5 Torpedo Boat 80 cm RC Capable","price":47.0,"description":"3D model description\nThis 3D printable model represents the Soviet Tupolev G-5 torpedo boat, recreated at approximately 1:24 scale with a finished length of about 80 cm. Despite its size, the model is intentionally designed to be simple, robust, and easy to assemble. The entire main hull is constructed from only six primary parts, with extensive internal alignment bosses that make positioning and gluing precise and stress-free. The largest single hull piece measures approximately 270 × 155 × 60 mm, keeping all critical parts well within the capabilities of common desktop 3D printers.\n\nOnce the main hull is assembled, the model can be optionally detailed using over 180 accessory parts, all modeled from historically accurate configurations used during the G-5’s operational life. These accessories are entirely optional and can be added selectively, allowing builders to keep the project clean and straightforward or expand it gradually over time. A period-correct torpedo model is included for an authentic final presentation.\n\n3D printing settings\nThe model is designed from the ground up with RC conversion in mind. Both rudders are fully functional, with prepared mounting points, servo locations, and control-rod paths integrated directly into the hull. Multiple motor mounting options support both single- and dual-drive configurations. Special attention has been given to waterproofing: drainage holes, protected wiring routes, and geometry intended to simplify sealing are built into the design. The original large central deck hatch is removable, and both the sail and two deck sections may also be used as removable access hatches, providing excellent access to the interior for electronics, batteries, and maintenance. Whether built as a static display or developed into a capable RC craft, this model offers a smooth, builder-friendly experience from first print to final assembly. Rudders can be used in place of each other, right rudder has a slot at the rear for insterting a transparent rudder-booster plate if necessary. Full color 3MF file format is also available.","imageAlt":"3D printable model Tupolev G5 Torpedo Boat 80 cm RC","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/tupolev-g5-torpedo-boat-80-cm-rc-capable","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/ahf19bs2ijbk32z53ybu4jlg8551/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/00.jpg","gridUrl":"https://media.cgtrader.com/variants/ahf19bs2ijbk32z53ybu4jlg8551/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/00.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/tupolev-g5-torpedo-boat-80-cm-rc-capable","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":129,"name":".3mf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6797260/051c079a8a/tupolev-g5-torpedo-boat-80-cm-rc-capable-3d-model-051c079a8a.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"4764412","type":"listingItem","attributes":{"id":4764412,"title":"Shovel one tenth","price":0.0,"description":"Shovel for a 1/10 scale rig or diorama.  It was designed with the intent that a work truck would have a shovel in the back with other objects as well.  These designs are made with out-of-the-box printer settings in mind.  If you are a beginner try it and tell me how it went.","imageAlt":"plastic 3D print model Shovel one tenth","url":"https://www.cgtrader.com/free-3d-print-models/miniatures/vehicles/shovel-one-tenth","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/nwZefe8uFkxJSDFHhfuDBkKx/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Shovel%201.jpg","gridUrl":"https://media.cgtrader.com/variants/nwZefe8uFkxJSDFHhfuDBkKx/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Shovel%201.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/miniatures/vehicles/shovel-one-tenth","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":117,"name":".gltf","is_native":false},{"id":12,"name":".obj","is_native":false},{"id":51,"name":".stl","is_native":false}],"categorySlug":"miniatures","subcategorySlug":"vehicles","categoryTitle":"Miniatures","subcategoryTitle":"Cars \u0026 Vehicles","schemaImageUrl":"https://img-new.cgtrader.com/items/4764412/0c683fb697/shovel-one-tenth-3d-model-0c683fb697.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"1857683","type":"listingItem","attributes":{"id":1857683,"title":"RC Bait Boat V1 for Carpfishing 3D Model Print","price":40.0,"description":"RC Bait Boat for Carpfishing .\nFishing rc boat 3D print model.\nIdeal for carpfishing.\nDimensions: 406 mm x 283 mm x 168 mm.\nMaterial for 3d printed: ABS\nThis file is a DIY RC boat.\n\"Arka Kapak\" and \" \"celik mil\"  parts made by Inox material.\nAvailable file formats:\nJPG, CADPart, CADProduct, IGS, STP, STL, OBJ, MTL, DXF\nİf you want to make changes, source files is available. \n\n","imageAlt":"RC Bait Boat V1 for Carpfishing 3D Model Print diy","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/rc-bait-boat-v1-for-carpfishing-3d-model-print","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/ypVmRCZDX6oSgMsGjRTPJ2Ve/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/rc-bait-boat-v1-for-carpfishing-3d-model-print-3d-model-obj-mtl-dxf-stl-ige-igs-iges-stp-CATProduct-CATMaterial-CATAnalysis.jpg","gridUrl":"https://media.cgtrader.com/variants/ypVmRCZDX6oSgMsGjRTPJ2Ve/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/rc-bait-boat-v1-for-carpfishing-3d-model-print-3d-model-obj-mtl-dxf-stl-ige-igs-iges-stp-CATProduct-CATMaterial-CATAnalysis.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/rc-bait-boat-v1-for-carpfishing-3d-model-print","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":113,"name":".CATProduct","is_native":false},{"id":7,"name":".dxf","is_native":false},{"id":29,"name":".ige","is_native":false},{"id":72,"name":".stp","is_native":false},{"id":51,"name":".stl","is_native":false},{"id":12,"name":".obj","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/1857683/3856feb812/rc-bait-boat-v1-for-carpfishing-3d-model-print-3d-model-3856feb812.webp","saleOffDiscount":50,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"premium"}},{"id":"5527539","type":"listingItem","attributes":{"id":5527539,"title":"Rc Plane Sled","price":0.0,"description":"This is a simple Rc Plane sled, it is to increase ground clearance from the propellor to allow takeoff for rc planes. it is designed to skid and slide over the ground smoothly. It is pretty strong and can resist some hard impacts. This doesnt have to be used for Rc planes but can be used for other stuff like a rc snow mobile.","imageAlt":"Rc Plane Sled 3D printable model","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/rc-plane-sled","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/mAAdC8zkFikaeZ4wgcRPZFX8/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Screenshot%202024-09-14%20183954.jpg","gridUrl":"https://media.cgtrader.com/variants/mAAdC8zkFikaeZ4wgcRPZFX8/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Screenshot%202024-09-14%20183954.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/rc-plane-sled","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":25,"name":".dae","is_native":false},{"id":5,"name":".fbx","is_native":false},{"id":12,"name":".obj","is_native":false},{"id":189,"name":".ply","is_native":false},{"id":21,"name":".blend","is_native":false},{"id":null,"name":null,"is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/5527539/504647ad2a/rc-plane-sled-3d-model-504647ad2a.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6342270","type":"listingItem","attributes":{"id":6342270,"title":"Vosper RTTB RC Model 1-24 Scale","price":25.0,"description":"This model is based on Vic Smeed’s plan originally published by Model Maker magazine back in the late 50’s. It is the 1/24th scale Vosper Rescue and Target Towing Boat (RTTB) 2754. I have made some adjustments though, based on reference photos and for ease of printing/design.\n\nFor a quick preview and to check printer size compatibility, the following are the largest dimensions from all of the pieces: Biggest Length: 220mm, Biggest Width: 240mm, Biggest Height: 263mm. (This is the mast height. Will probably need to be sliced and resin printed.)\n\nAt 1/24 scale, this model is roughly 877mm long, 240mm wide, and 468mm tall.\n\nShaft tubes are designed for 5mm tubes at 1/24th scale.\n\nI have not printed this plan personally yet, so if you run into any glaring issues please let me know and I will modify and directly send you corrected files as necessary.","imageAlt":"Vosper RTTB RC Model 1-24 Scale","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/vosper-rttb-rc-model-1-24-scale","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/2gkdltkevwy88pt24vnn35csje69/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/vosper-rttb-rc-model-1-24-scale-3d-model-5acd20ec8d.jpg","gridUrl":"https://media.cgtrader.com/variants/2gkdltkevwy88pt24vnn35csje69/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/vosper-rttb-rc-model-1-24-scale-3d-model-5acd20ec8d.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/vosper-rttb-rc-model-1-24-scale","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6342270/5acd20ec8d/vosper-rttb-rc-model-1-24-scale-3d-model-5acd20ec8d.webp","saleOffDiscount":0,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"premium"}},{"id":"5638905","type":"listingItem","attributes":{"id":5638905,"title":"TRX 4 and TRX 6 Bumper mount for ahead RC bumpers","price":0.0,"description":"If you're using one of our body shells, you'll know we love to design our own bumpers. To make mounting our bumpers easier to your TRX4 or TRX6, we've designed a bumper mount so you won't have to go out and buy one and worry about cross compatibility.\n\n\nFDM printing\n\nUse 50% or more infill for ultra strength\nPETG, PLA +, ASA, ABS for trail durability","imageAlt":"TRX 4 and TRX 6 Bumper mount for ahead RC 3D print model","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/trx-4-and-trx-6-bumper-mount-for-ahead-rc-bumpers","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/AMeW8G8KcSPBhY2KKT3HVPrk/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Capture.jpg","gridUrl":"https://media.cgtrader.com/variants/AMeW8G8KcSPBhY2KKT3HVPrk/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Capture.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/trx-4-and-trx-6-bumper-mount-for-ahead-rc-bumpers","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"automotive","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Automotive \u0026 Car parts","schemaImageUrl":"https://img-new.cgtrader.com/items/5638905/e3476ccf87/trx-4-and-trx-6-bumper-mount-for-ahead-rc-bumpers-3d-model-e3476ccf87.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"7117109","type":"listingItem","attributes":{"id":7117109,"title":"Race boat full scale RC","price":16.0,"description":"full scale race boat ready for RC  configured for 600mm.\nful scale 600mm height 80mm width 240 mm.","imageAlt":"Race boat 24inch","url":"https://www.cgtrader.com/3d-print-models/games-toys/other/full-size-race-boat-stl","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/v3m7hstvauztgrjiwqk1nsmh5cmr/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Gemini_Generated_Image_5robco5robco5rob.jpg","gridUrl":"https://media.cgtrader.com/variants/v3m7hstvauztgrjiwqk1nsmh5cmr/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Gemini_Generated_Image_5robco5robco5rob.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/games-toys/other/full-size-race-boat-stl","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":129,"name":".3mf","is_native":false}],"categorySlug":"games-toys","subcategorySlug":"other","categoryTitle":"Games \u0026 Toys","subcategoryTitle":"Other","schemaImageUrl":"https://img-new.cgtrader.com/items/7117109/9b5ca4e1cb/race-boat-full-scale-rc-3d-model-9b5ca4e1cb.webp","saleOffDiscount":50,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":"premium"}},{"id":"83007","type":"listingItem","attributes":{"id":83007,"title":"rc scale traction boards 1 10","price":0.0,"description":"\u003cp\u003eThese are self designed waffleboards,that help your rig to get through /over different obstacles.\u003c/p\u003e","imageAlt":"rc scale traction boards 1 10 3D print model","url":"https://www.cgtrader.com/free-3d-print-models/miniatures/vehicles/rc-scale-traction-boards-1-10","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/qLWu23ANe9g4NmAxBBcW2VUW/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/rc-scale-traction-boards-1-10-3d-model-stl.jpg","gridUrl":"https://media.cgtrader.com/variants/qLWu23ANe9g4NmAxBBcW2VUW/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/rc-scale-traction-boards-1-10-3d-model-stl.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/miniatures/vehicles/rc-scale-traction-boards-1-10","isCgtVerified":true,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"miniatures","subcategorySlug":"vehicles","categoryTitle":"Miniatures","subcategoryTitle":"Cars \u0026 Vehicles","schemaImageUrl":"https://img-new.cgtrader.com/items/83007/e3a47a0601/rc-scale-traction-boards-1-10-3d-model-e3a47a0601.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"5783149","type":"listingItem","attributes":{"id":5783149,"title":"WTC110mm  for rc submarine model","price":22.5,"description":"Diving System for Model Submarines (WTC) – 3D Printable Kit\nBring your RC submarine to life with this advanced, field-tested diving system. This comprehensive set of 3D files contains all the printable parts required to build a reliable WTC (Water Tight Cylinder), specifically designed for a 110mm diameter tube.\n\nThe Principle: Innovative Pressureless System\nThis system operates on a \"pressureless\" principle. A pump moves water in and out of a ballast tank, while air escapes through a clever, included snorkel positioned as high as possible in the model.\n\nUnderwater: The pump empties the tank against a slight vacuum.\n\nSurface: As soon as the boat rises and the snorkel opens, the tank is filled with air at the pump's full capacity.\n\nWhat’s Included in the Download?\nThe files are highly versatile and offer flexibility for various configurations:\n\nEnd Caps: Suitable for various servo setups (4-servo X-Rudder, 2-servo X-Rudder, or traditional rudders).\n\nHubs \u0026 Couplings: * Motor hub for 5010-360KV brushless motors.\n\nPump hub for Extron Kavan or standard pumps.\n\nVarious servo hubs (Midi or standard).\n\nMagnetic couplings for 10mm magnets.\n\nBallast Tanks: Choice of a 182mm tank (approx. 1000ml) or a 212mm tank (approx. 1170ml).\n\nElectronics: RC and battery hub for 3s 2200mAh LiPo batteries.\n\nExtras: Specific parts for the Walrus class (1/60 - 1/50) and a specialized 5mm snorkel (resin print).\n\nSpecifications \u0026 Dimensions\nDiameter: Designed for 110mm tubes (Acrylic 110x3mm).\n\nLength: Varies between 500mm and 550mm depending on the configuration.\n\nConnections: Features two servo connections at the rear and two at the front (e.g., for dive planes in the sail or lighting).\n\nBuilding Support\nIncluded with the files, you will find:\n\nA concise manual.\n\nA detailed Bill of Materials (BOM) including part numbers where possible.\n\nReference photos of the required hardware.\n\nSee the system in action: Video of the Walrus class equipped with this WTC\n\nImportant Information for the Builder\nExperience Required: Building functional RC submarines requires experience with model boat construction. This is not a ready-made kit, but a high-quality technical foundation.\n\nNon-printable Parts: The snorkel requires an 8mm PP hollow ball (not included).\n\nWaterproofing: The 3D-printed end caps and ballast tank must be treated with Dichtol or a similar sealant to ensure full watertightness.\n\nRecommended Print Settings\nEnd Caps: PETG\n\nBallast Tank: ABS-GF (recommended for optimal strength)\n\nOther Parts: PETG or similar material.\n\nCombine this system with the Walrus class files: Download the Walrus class 1/60 scale models here","imageAlt":"hobby-diy WTC110mm for rc submarine model","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/wtc110mm-for-rc-submarine-model","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/rcl6ae6gl12ddlnfqg11sl9ion3c/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/WTC110mm-Walrus.jpg","gridUrl":"https://media.cgtrader.com/variants/rcl6ae6gl12ddlnfqg11sl9ion3c/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/WTC110mm-Walrus.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/wtc110mm-for-rc-submarine-model","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":100,"name":".pdf","is_native":false},{"id":216,"name":".jpg","is_native":false},{"id":215,"name":".png","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/5783149/e4313486d7/wtc110mm-for-rc-submarine-model-3d-model-e4313486d7.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"1933359","type":"listingItem","attributes":{"id":1933359,"title":"Whale Flowerpot","price":0.0,"description":"**DIY** : Whale Flowerpot\n\n- OBJ (Total 228,079 Polygon )\n- STL (Model is STL file format and Ready to 3D Printing )\n- OBJ,STL,VRML(Format Printing ) \n- ZTL Zbrust2019\n\n**Size** :\n-  X : Face Length : 5.21 Inch\n-  Z : Depth Length : 3 Inch\n-  Y : Height Length : 3 Inch\n\n**Printer Test Model** :Simplify3D\n\n**Image** : Zbrush\n\n**Render** Keyshot\n\n\n\n\n\n","imageAlt":"3D print model Whale Flowerpot","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/whale-flowerpot","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/XtRFpUm9wPhUCK81nBwEQESu/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Whale%20%285%29.jpg","gridUrl":"https://media.cgtrader.com/variants/XtRFpUm9wPhUCK81nBwEQESu/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Whale%20%285%29.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/whale-flowerpot","isCgtVerified":true,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":55,"name":".ztl","is_native":false},{"id":51,"name":".stl","is_native":false},{"id":12,"name":".obj","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/1933359/19738a3ba4/whale-flowerpot-3d-model-19738a3ba4.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6260008","type":"listingItem","attributes":{"id":6260008,"title":"PT-556 US Navy Patrol Boat Elco Thunderbolt RC Kit","price":60.0,"description":"PT-556 US Navy Patrol Boat “Elco Thunderbolt” – RC Model 3D Files Kit\nBring a piece of WWII naval history to life with this highly detailed 3D printable RC model kit of the PT-556, one of the famed Elco 80-foot Patrol Torpedo Boats used by the US Navy. This digital download includes all the STL files needed to build your own scale RC version of the Thunderbolt, complete with working features and historically inspired detailing.\n\nKey Features:\n\nAccurate Hull \u0026 Superstructure: Modeled with precision based on real reference material and schematics of the Elco 80-footer class, specifically tailored to represent the PT-556.\n\nOptimized for RC Functionality: Designed with internal space and compartments for motors, servos, battery trays, and other RC components, making this kit ideal for radio-controlled builds.\n\nModular Design: The files are split into printer-friendly sections that can be assembled easily with alignment keys and mounting points.\n\nFunctional Details: Includes rotating gun mounts, torpedo tubes, radar mast, engine vents, and other recognizable deck features that make this model stand out on the water.\n\nPrintable at Home: Compatible with most hobbyist FDM 3D printers, the kit is designed to be practical to print and assemble, using PLA or other common materials.\n\nScale Options:\nThe default design is scaled to 1:30 but the files can be resized as needed depending on your printer bed size and RC component preferences.\n\nBackground – PT-556 “Thunderbolt”:\nPT-556 was part of the famous Elco class of Patrol Torpedo boats that served with distinction during WWII. These fast, agile vessels were known for their speed, daring missions, and ability to deliver a heavy punch with torpedoes and machine guns. The “Thunderbolt” nickname evokes the raw power and striking speed these boats were known for on Pacific waters.\n\nWhether you're a scale modeler, a naval history enthusiast, or a dedicated RC hobbyist, this kit offers an immersive and rewarding build experience.\n\nDefault file size when fully constructed is\nX - 207mm (Width)\nY - 346mm (Depth/Hight)\nZ - 800mm (Length)\n\n3D printing settings\nUse good support for certain parts. Use good material. Know your printer.","imageAlt":"PT-556 US Navy Patrol Boat Elco 3D printable model 2","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/pt-556-us-navy-patrol-boat-elco-thunderbolt-rc-kit","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/ufzrqv578aaina758o0v7j1bpy1z/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Screenshot%2007-02-2025%2007.55.34.jpg","gridUrl":"https://media.cgtrader.com/variants/ufzrqv578aaina758o0v7j1bpy1z/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Screenshot%2007-02-2025%2007.55.34.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/pt-556-us-navy-patrol-boat-elco-thunderbolt-rc-kit","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":12,"name":".obj","is_native":false},{"id":null,"name":null,"is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6260008/995ecee2d8/pt-556-us-navy-patrol-boat-elco-thunderbolt-rc-kit-3d-model-995ecee2d8.webp","saleOffDiscount":50,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"5242696","type":"listingItem","attributes":{"id":5242696,"title":"RC Receiver","price":0.0,"description":"Build a versatile RC receiver with RP2040, NRF24L01+, GPS, and sensors for precise control!\nFull building guide available on PCBWay:\nhttps://www.pcbway.com/project/shareproject/RC_Receiver_3b232201.html\n","imageAlt":"3D print model RC Receiver","url":"https://www.cgtrader.com/free-3d-print-models/gadgets/other/rc-receiver","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/YVksTXNHy4USURaFWsay49SF/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Receiver.jpg","gridUrl":"https://media.cgtrader.com/variants/YVksTXNHy4USURaFWsay49SF/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Receiver.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/gadgets/other/rc-receiver","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"gadgets","subcategorySlug":"other","categoryTitle":"Gadgets","subcategoryTitle":"Other","schemaImageUrl":"https://img-new.cgtrader.com/items/5242696/274aaa5a63/rc-receiver-3d-model-274aaa5a63.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6401551","type":"listingItem","attributes":{"id":6401551,"title":"HNLMS Karel Doorman - ARA 25 de Mayo 1-96 RC Model","price":25.0,"description":"This 1/96 scale model is based on the hull of a British Collosus class carrier that was later sold to the Netherlands (where it became R81 Karel Doorman), and afterwards to Argentina where it became ARA Venticinco de Mayo.  The configuration in these files are from its days as Karel Doorman, but should be easy to edit to the 25 de Mayo as necessary.  I have included some details on it, but it’s a bit of a “bare bones” style model that can be detailed in any way you like!\n\nI tried to keep all pieces under 250mm for printing. Some slicing may be required though.\n\nAt 1/96 scale, this model is about 2.2m long, 375mm wide, and 570mm tall.\n\nI have not printed this plan personally yet, so if you run into any glaring issues please let me know and I will modify and directly send you corrected files as necessary.\n\nEdit 1: It was brought to my attention that the 25 de Mayo had a flight deck that was extended a bit more than the Karel Doorman. As such, I made an add-on file that matches the curves of the base model to extend the flight deck. (Picture included in photos above.)\n\nEdit 2: The very tip of the bow near the keel was too thin for 3D print slicers to recognize, so there was a strange chunk missing out of the bow in the print preview. I have revised that portion to make it thicker and it should work now. Updated file included.","imageAlt":"HNLMS Karel Doorman - ARA 25 de Mayo 1-96 RC Model","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/hnlms-karel-doorman-ara-25-de-mayo-1-96-rc-model","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/kdbia1fx3y6tqhi7qq68ejuki8w4/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Screenshot%202025-08-27%20100155.jpg","gridUrl":"https://media.cgtrader.com/variants/kdbia1fx3y6tqhi7qq68ejuki8w4/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Screenshot%202025-08-27%20100155.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/hnlms-karel-doorman-ara-25-de-mayo-1-96-rc-model","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6401551/31506b9abd/hnlms-karel-doorman-ara-25-de-mayo-1-96-rc-model-3d-model-31506b9abd.webp","saleOffDiscount":0,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"premium"}},{"id":"5009619","type":"listingItem","attributes":{"id":5009619,"title":"Suit Kamen rider Geats mark 9 ","price":0.0,"description":"Hi guys, I've been working on this file for a long time, but I'll wait until it's done and I'll upload it for you guys to send me the file to make for cosplay. Made by GUN.GT Can you sub help me channel my lol please guys\n","imageAlt":"3D print model Suit Kamen rider Geats mark 9","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/suit-kamen-rider-geats-mark-9","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/xyTi9Fyxw3bjdrhniEUDnznq/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/full%20suit%20kamen%20rider%20geats%20%20mark%209.jpg","gridUrl":"https://media.cgtrader.com/variants/xyTi9Fyxw3bjdrhniEUDnznq/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/full%20suit%20kamen%20rider%20geats%20%20mark%209.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/suit-kamen-rider-geats-mark-9","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":5,"name":".fbx","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/5009619/e1377a65ce/suit-kamen-rider-geats-mark-9-3d-model-e1377a65ce.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6776177","type":"listingItem","attributes":{"id":6776177,"title":"USS Puritan BM1 - Coastal Defense Monitor - RC Model 1-96 Scale ","price":25.0,"description":"This 1/96 scale model is based on archival drawings of the USS Puritan (BM-1) coastal defense monitor built in 1882. Technically it was a “repair” of the original Civil War monitor ordered in 1872, however the ship was essentially a new build using very few parts from the original vessel.  She saw service during the Spanish-American War, and was decommissioned for the final time in 1910.\n\nI tried to keep all pieces under of 250mm for printing. Overall, this model is roughly 940mm long, 194 mm wide, and 362mm tall at 1/96 scale.\n\nBecause of the low freeboard design on this model, I anticipate water coming up on the deck. For this reason, I attempted to keep the hull and deck as one piece, with tall combing to place the turrets and superstructure around. I had to include a rudder hatch for installation access, but I designed it with a tongue-and-groove design that can be glued in after installation to ensure watertight integrity. I also included the hull splits at points under access holes to assist in assembly, but it’s still going to be tricky.\n\nEdit 1 (7/8/2026): After assembling the model myself, I realized a few things needed tweaking. The main battery turrets were WAY too tight, and were too close to the superstructure. I adjusted the outer and inner diameters for a cleaner fit. I also changed the control room roof in the top center to a flat top rather than rounded, for ease of printing.  After trying to drive it, I noticed it didn't turn well. This is because the shafts are too far from centerline for the rudder to be effective.  V2 closes this gap to situate the props more behind the rudder. (I utilized a bidirectional ESC on mine, so it's still steerable that way.) The shaft struts were also adjusted to their new position.","imageAlt":"USS Puritan BM1 - Coastal Defense Monitor - RC...","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/uss-puritan-bm1-coastal-defense-monitor-rc-model-1-96-scale","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/6li88aot3jm2g31gq9px6bdaual5/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Screenshot%202026-01-23%20163404.jpg","gridUrl":"https://media.cgtrader.com/variants/6li88aot3jm2g31gq9px6bdaual5/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Screenshot%202026-01-23%20163404.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/uss-puritan-bm1-coastal-defense-monitor-rc-model-1-96-scale","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6776177/463f7365d4/uss-puritan-bm1-coastal-defense-monitor-rc-model-1-96-scale-3d-model-463f7365d4.webp","saleOffDiscount":0,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"premium"}},{"id":"642183","type":"listingItem","attributes":{"id":642183,"title":"Discover Boat","price":0.0,"description":"Hi guy , This is my next model . Of course , it's free :)) . I hope I can help you :)) tks","imageAlt":"3D print model Discover Boat","url":"https://www.cgtrader.com/free-3d-print-models/art/other/discover-boat","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/nURjTG7Kk8z2HYPVcQTLs4dq/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/discover-boat-3d-model-max-obj-3ds-fbx-mtl.jpg","gridUrl":"https://media.cgtrader.com/variants/nURjTG7Kk8z2HYPVcQTLs4dq/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/discover-boat-3d-model-max-obj-3ds-fbx-mtl.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/art/other/discover-boat","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":2,"name":".3ds","is_native":false},{"id":12,"name":".obj","is_native":false},{"id":5,"name":".fbx","is_native":false},{"id":17,"name":".max","is_native":false}],"categorySlug":"art","subcategorySlug":"other","categoryTitle":"Art \u0026 Design","subcategoryTitle":"Other","schemaImageUrl":"https://img-new.cgtrader.com/items/642183/db50d09b08/discover-boat-3d-model-max-obj-3ds-fbx-mtl.png","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6715780","type":"listingItem","attributes":{"id":6715780,"title":"USS Gilmer APD-11 RC Model 1-48 Scale","price":25.0,"description":"This model was designed by request from my friend in honor of his father-in-law who served on her in WWII. (I hope your wife likes it, Walter!!)\n\nThis 1-48 scale model is the USS Gilmer (APD-11). It is based off of APD drawings from the National Archives, as well as photos of the actual USS Gilmer. Dubbed the “Green Dragons” because of their unique jungle pattern camouflage, these APDs were converted from Clemson class destroyers. Two of the four stacks were removed to make room for the 4 Higgins landing boats and davits. (Gilmer started its service as DD-233.)\n\nI tried to keep all pieces under 250mm for printing, and designed with FDM printing in mind.\n\nAt 1/48 scale, this model is about 2m long, 190mm wide, and 620mm tall.\n\nI have not printed this plan personally yet, so if you run into any glaring issues please let me know and I will modify and directly send you corrected files as necessary.\n\nEdit 1 (1/15/26): Some gaps between the hull and the deck support were found on hull pieces 3-7 that caused a misprint. Files have been edited and re-uploaded in the folder. If you purchased the older version please feel free to reach out to me and I will send you the edited files.","imageAlt":"hobby-diy USS Gilmer APD-11 RC Model 1-48 Scale","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/uss-gilmer-apd-11-rc-model-1-48-scale","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/9oc800bh0g5o00ia02hg74kg7ig9/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Screenshot%202025-12-30%20011533.jpg","gridUrl":"https://media.cgtrader.com/variants/9oc800bh0g5o00ia02hg74kg7ig9/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Screenshot%202025-12-30%20011533.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/uss-gilmer-apd-11-rc-model-1-48-scale","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6715780/f2c990d642/uss-gilmer-apd-11-rc-model-1-48-scale-3d-model-f2c990d642.webp","saleOffDiscount":0,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"premium"}},{"id":"7076729","type":"listingItem","attributes":{"id":7076729,"title":"CyberScarab X-Frame Drone 3D Print Model 8 inch Prop","price":0.0,"description":"Introducing the CyberScarab X-Frame, a rugged and practical 3D printable drone frame designed for efficiency and ease of maintenance. This is the streamlined, fixed-arm version of the original CyberScarab, featuring sturdy, replaceable arms.\nKey Design Features:\nModular Architecture: Designed with replaceable arms. In the event of a crash, you can quickly swap out a single arm without needing to reprint the entire main body.\nPropeller Compatibility: Optimized to fit 8-inch foldable propellers, providing an excellent balance of thrust and efficiency for mid-sized builds.\nAesthetic \u0026 Functional: Features a sleek, cyberpunk-inspired central canopy (the 'Scarab' shell) that protects internal electronics while maintaining aerodynamic airflow through built-in vents.\nCarbon Fiber Styling: The model geometry is optimized for applying carbon fiber textures or wraps (as shown in renders) for a premium finish.\nPhysical Properties (As calculated in SolidWorks):\nMass: ~1131.55 grams (This will vary based on your infill settings, wall thickness, and chosen filament material. Calculation based on solid CAD geometry).\nVolume: 621,389 cubic millimeters\nCenter of Mass: Perfectly balanced design for stable flight dynamics (X: -0.05, Y: 33.41, Z: -0.21).\nFile Formats Included:\nSTL (Prepared for 3D Printing)\nSLDPRT / SLDASM (Native SolidWorks files for your own modifications)\nSTEP / IGES (For import into other CAD software)\nIdeal for: DIY Drone Builders, FPV Enthusiasts, and 3D Printing Hobbyists looking for a robust and striking quadcopter frame.\n(Note: This listing is for the 3D files only. Electronics, motors, and propellers are not included).\n","imageAlt":"CyberScarab X-Frame Drone 3D Print Model 8 inc...","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/cyberscarab-x-frame-drone-3d-print-model-8-inch-prop","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/gjo0cgca3pewl0wwn5msjzvd3s3u/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Untitled.jpg","gridUrl":"https://media.cgtrader.com/variants/gjo0cgca3pewl0wwn5msjzvd3s3u/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Untitled.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/cyberscarab-x-frame-drone-3d-print-model-8-inch-prop","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":72,"name":".stp","is_native":false},{"id":117,"name":".gltf","is_native":false},{"id":51,"name":".stl","is_native":false},{"id":12,"name":".obj","is_native":false},{"id":5,"name":".fbx","is_native":false},{"id":21,"name":".blend","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/7076729/aa66612924/cyberscarab-x-frame-drone-3d-print-model-8-inch-prop-3d-model-aa66612924.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"4433514","type":"listingItem","attributes":{"id":4433514,"title":"Dutch Walrus class model submarine designed for rc 1-50 scale","price":35.0,"description":"Complete 3d model of the Dutch Walrus Class submarine made for RC.\n\nThe Walrus Class is a modern Diesel-Electric submarine in service from 1990 with a total of 4 submarines in active service.\n\nHrMs Walrus, HrMs Bruinvis, HrMs Zeeleeuw, HrMs Dolfijn.\n\nThe Walrus Class has the ability's to operate worldwide with an armament of 4 21 inch torpedo tubes.\n\nLength: 67,75m\nBeam: 8,4m\nDraft: 6,6m\n\nThe model printed in 1/50 scale is 1,36m long. and made for 100mm or 120 mm WTC.\n\nSpecs:\n\nUpdated model, completely new designed. \n\nComplete submarine hull,\n\nHull separated in 2 parts, top and bottom. with locking system.\n\n78mm Propellor (to be printed in resin)\nComplete with 3d printable rudder hevels for X-rudder in the tail.\nScissor mechanism for raising periscopes\n\n\n\nI wanted to make a rather unique submarine and always liked the look of the Dutch Walrus Class. I didnt want to make a epoxy hull because to much time consuming.\n\nThis model is developed consulting an experienced rc submarine builder. Any rcmodelling experience is needed for the technical diving part.\n\n\nThe images of the printed version are the (identic) 1/60 scale version.\n\n3D PRINTING SETTINGS\nPrint filament: PLA+ (Esun)\nPrinter: SovolSV06\nTemp: 210 c\nRes 0,1mm\nSpeed 50mm/s depends on printer type\nBed : 50 c\nMost parts with brim and without support\n\nPrintbed size for 1/50 version: 250x250x250\nPrintbed for 1/60 version 220x220x250 (I printed the Walrus in 1/60 scale)\n\nUsage: 2,5kg Filamanet.\n\nSome parts are best printed in Resin:\nNav lights and  Propellor.\n\nThis model is soon also available in 1/60 and 1/100 scale\n\nThe model in te pictures is printed in 1/60 scale\n\nSailing RC model on YouTube is printed from this files in 1/60 scale:\n","imageAlt":"Dutch Walrus class model submarine designed for rc 1-50","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/dutch-walrus-class-model-submarine-designed-for-rc-1-50-scale","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/eNfEh92iDYhRtQsQRVcVCPee/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Walrus-Class-50-Front.jpg","gridUrl":"https://media.cgtrader.com/variants/eNfEh92iDYhRtQsQRVcVCPee/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Walrus-Class-50-Front.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/dutch-walrus-class-model-submarine-designed-for-rc-1-50-scale","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/4433514/4efcba1bd4/dutch-walrus-class-model-submarine-designed-for-rc-1-50-scale-3d-model-4efcba1bd4.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"2163245","type":"listingItem","attributes":{"id":2163245,"title":"PROPELLER AP-PR-001-3RH","price":0.0,"description":"Propeller of 150 [mm] in diameter for RC plane. This is Right-hand propeller with blade design AP-PR-001. (see attached drawing for blade and hub design)\n\nContent:\n\nRight-Hand rotation:\n\n- 3 blades propeller (*.stl; *.stp; *.igs)\n- 3x models in total\n- 1x drawing\n\n-------------------------------------------------------------------------------------------------------------\nPlease fill attached form if You would like to order bespoke propeller design.\n-------------------------------------------------------------------------------------------------------------","imageAlt":"PROPELLER AP-PR-001-3RH 3D print model","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/mechanical-parts/propeller-ap-pr-001-3rh","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/DwgozmR4v3J6xDFHoDfCSBbh/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/AP-PR-001-3RH.jpg","gridUrl":"https://media.cgtrader.com/variants/DwgozmR4v3J6xDFHoDfCSBbh/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/AP-PR-001-3RH.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/mechanical-parts/propeller-ap-pr-001-3rh","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":29,"name":".ige","is_native":false},{"id":72,"name":".stp","is_native":false},{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"mechanical-parts","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Mechanical parts","schemaImageUrl":"https://img-new.cgtrader.com/items/2163245/31f6cb6b6d/propeller-ap-pr-001-3rh-3d-model-31f6cb6b6d.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"7274303","type":"listingItem","attributes":{"id":7274303,"title":"RC Tug Flying Phantom 3D print","price":60.0,"description":"Flying Phantom is a model of a Clyde built tug from 1981.  The original was built at Ferguson's in Glasgow and worked her whole life on the river tugging large ships in and out of the port, including such famous ships as the QE2.  \n\nIt is a nice model to make - relatively simple for anyone who hasn't tried 3D printing before or the modelling of RC boats,a and yet it is a scale model with all the detail that one would expect, making an extremely attractive model that gains loads of compliments pool side.\n\nNot only that but it sails really well, steering in both forwards and reverse due to its Kort nozzle rudder.  Despite the height of the fire platforms it is a very stable model that works well in windy conditions.\n\nThe fire fighting platforms add extra interest.  Not only do they look good but instructions are given on how to make the fire monitors working in the model.\n\nThe model is at 1/48th scale making a model just 750mm long, but it could be scaled up or down  to make a larger or smaller model  depending on your preference.\n\nEverything that you see in the pictures is modelled in the stl files..... and advice is given as to what motor and hardware is required to get the model on the water.\n\nAs always with my models, I am very ready to give help and advice through the messaging system on cgtrader, and am also prepared to rework parts if you want some adaption or change to the original model\n\nHere is a link to the free building instructions, so you can get a foretaste of what is required to build the model:  \nhttps://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/rc-tug-flying-phantom-building-instructions","imageAlt":"RC Tug Flying Phantom 3D print","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/rc-tug-flying-phantom-3d-print","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/1tcyd9qcehnnm3uumizxen47ziqt/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/25.jpg","gridUrl":"https://media.cgtrader.com/variants/1tcyd9qcehnnm3uumizxen47ziqt/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/25.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/rc-tug-flying-phantom-3d-print","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/7274303/a2bdbce6d7/rc-tug-flying-phantom-3d-print-3d-model-a2bdbce6d7.webp","saleOffDiscount":50,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"2449921","type":"listingItem","attributes":{"id":2449921,"title":"RC Monster Truck 48 inch Good Year Super Terra Tire and wheel","price":0.0,"description":"RC Monster Truck Old School 48 inch Super Terra Tire and wheel 1/10 scale. Designed to accept bolt on JConcepts tribute type hub adapters. Raised Goodyear logo is separate included file, can also be printed in TPU and glued onto sidewall (Recommend E6000 adhesive)\n\nTire Diameter is 146.05mm / 5.75 inches tall\nHardware required: M3\nRequired: Jconcepts Tribute hub adapters or equivelant. You should find these in either plastic or aluminum and with various offset options to meet your needs.","imageAlt":"3D printable model RC Monster Truck 48 inch Good Year 4","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/rc-monster-truck-48-inch-good-year-super-terra-tire-and-wheel","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/2j1zwtDLUDBTWpMN8mmL4acq/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/20200531_182358%20%281%29.jpg","gridUrl":"https://media.cgtrader.com/variants/2j1zwtDLUDBTWpMN8mmL4acq/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/20200531_182358%20%281%29.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/rc-monster-truck-48-inch-good-year-super-terra-tire-and-wheel","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/2449921/e2a06f35d5/rc-monster-truck-48-inch-good-year-super-terra-tire-and-wheel-3d-model-e2a06f35d5.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"7117492","type":"listingItem","attributes":{"id":7117492,"title":"kometa hydrofoil","price":175.0,"description":"Type : Comet\nProject : 342M, 342MT, 342ME, 342MS\nDescription of the vessel : Passenger speed hydrofoil\nConstruction : USSR \\ Poti, since 1962 \\ Feodosia, since 1964\n  The first flight was made on April 28, 1962 \n  The Kometa is a passenger hydrofoil that was designed in the former USSR. Experts say the Kometa, which means comet in Russian, is one of the most successful passenger hydrofoils in the world and in operation in many countries.\n  The model is dedesigned in 1/35 scale . Length : 984mm , wide : 315mm and height : 226mm. It can be 3dprinted and made for rc.\n  Shaft : 350mm sleeve 300shaft 8mm diameter\n  Prepeler: 2 x 3 blades 34mm diameter \n  Rudder : 4mm shaft 50mm length .\n","imageAlt":"kometa hydrofoil","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/kometa-hydrofoil","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/5p368isevn2t68ac55sv1rejluif/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/1000006241.jpg","gridUrl":"https://media.cgtrader.com/variants/5p368isevn2t68ac55sv1rejluif/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/1000006241.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/kometa-hydrofoil","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":100,"name":".pdf","is_native":false},{"id":216,"name":".jpg","is_native":false},{"id":215,"name":".png","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/7117492/3e7d95f42d/kometa-hydrofoil-3d-model-3e7d95f42d.webp","saleOffDiscount":70,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6718253","type":"listingItem","attributes":{"id":6718253,"title":"Free Sample Parts - Assembly Manuals","price":0.0,"description":"This free download contains the forward most hull STL and the assembly manuals for each of my for sale models. Download to test print the hull part and/or examine the build process before purchasing the model of your choice.","imageAlt":"Free Sample Parts - Assembly Manuals 3D printable model","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/free-sample-parts-assembly-manuals","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/a8croekz2x53cdggyd68dcou5le2/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/FREE%20-%20Test%20Parts%20-%20Manuals.jpg","gridUrl":"https://media.cgtrader.com/variants/a8croekz2x53cdggyd68dcou5le2/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/FREE%20-%20Test%20Parts%20-%20Manuals.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/free-sample-parts-assembly-manuals","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":100,"name":".pdf","is_native":false},{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6718253/06b436e5ba/free-sample-parts-assembly-manuals-3d-model-06b436e5ba.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"7184573","type":"listingItem","attributes":{"id":7184573,"title":"Fish boat V2  full scale RC","price":20.0,"description":"Full scale fish boat 24\" length 190mm approx height \u0026 width\n\nOptimized for 225x 280mm printer","imageAlt":"yacht full scale RC","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/1970-boat","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/ozu8be1o0rq7p42mn8cd9fxerwov/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/082998C1-189D-4E7D-8DD6-6ECF9123FA8D.jpg","gridUrl":"https://media.cgtrader.com/variants/ozu8be1o0rq7p42mn8cd9fxerwov/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/082998C1-189D-4E7D-8DD6-6ECF9123FA8D.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/1970-boat","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":129,"name":".3mf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/7184573/bdef5aa3cf/fish-boat-v2-full-scale-rc-3d-model-bdef5aa3cf.webp","saleOffDiscount":70,"eligibleForSubscription":true,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":"premium"}},{"id":"6908596","type":"listingItem","attributes":{"id":6908596,"title":"Collectible Benchy style Titanic","price":0.0,"description":"3D model description\nThis creative design reimagines the classic 3D printing test boat as a Titanic-inspired ship, blending functionality with historical aesthetics. The model keeps the recognizable Benchy proportions while adding iconic details reminiscent of the legendary ocean liner, creating a unique and eye-catching variation.\n\nPerfect as both a calibration test and a decorative piece, this STL allows makers to evaluate print quality while enjoying a fun and nostalgic design. The combination of familiar geometry and added detailing makes it ideal for showcasing printer capabilities.\n\nOptimized for FDM and resin printing, the model maintains clean geometry and reliable print behavior while enhancing visual appeal.\n\nA classic test model reborn with historic style.\n\n3D printing settings\n• Recommended layer height: 0.16–0.2 mm for general calibration use\n• Use 2–3 perimeters to evaluate wall quality\n• 10–15% infill for standard testing\n• Print without supports for true benchmark testing\n• Adjust speed and cooling to test printer performance\n• Ideal for comparing different filaments and settings\n• Resin printing enhances fine decorative details","imageAlt":"3D printable model Collectible Benchy style Titanic","url":"https://www.cgtrader.com/free-3d-print-models/art/sculpture/collectible-benchy-style-titanic","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/d7b7tzorqqt3lodh3nb78cb3l5ku/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Benchy%20Titanic%2001.jpg","gridUrl":"https://media.cgtrader.com/variants/d7b7tzorqqt3lodh3nb78cb3l5ku/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Benchy%20Titanic%2001.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/art/sculpture/collectible-benchy-style-titanic","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"art","subcategorySlug":"sculpture","categoryTitle":"Art \u0026 Design","subcategoryTitle":"Sculptures","schemaImageUrl":"https://img-new.cgtrader.com/items/6908596/b11dadad35/collectible-benchy-style-titanic-3d-model-b11dadad35.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6709049","type":"listingItem","attributes":{"id":6709049,"title":"Admirable Class Minesweeper - 1-48 Scale - 3D Printable RC Model","price":35.0,"description":"The Admirable-class minesweepers were the most numerous and successful class of steel-hulled fleet minesweepers built by the United States during World War II. Designed as a larger, more capable successor to the earlier wooden-hulled 180-foot “Auk-class,” the Admirable class became the backbone of U.S. mine countermeasures in the final two years of the war and continued in widespread service (both U.S. and foreign) for decades afterward.\n\n\nAt 1/48 scale the finished model will measure approximately 1200mm long x 210mm wide x 560mm tall from keel to top of mast. Illustrated assembly guide included, in PDF format. 3D files (STL format) were designed in CAD. All parts scaled to fit 250mm x 250mm bed. \n\n","imageAlt":"Admirable Class Minesweeper - 1-48 Scale - 3D Printable 1","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/1-48-scale-3d-printed-admirable-class-minesweeper","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/vb6x5gv4ucxglf73vfqupmriuo8p/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/20251225_222225.jpg","gridUrl":"https://media.cgtrader.com/variants/vb6x5gv4ucxglf73vfqupmriuo8p/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/20251225_222225.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/1-48-scale-3d-printed-admirable-class-minesweeper","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":100,"name":".pdf","is_native":false},{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6709049/cc01c07686/admirable-class-minesweeper-1-48-scale-3d-printable-rc-model-3d-model-cc01c07686.webp","saleOffDiscount":0,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"premium"}},{"id":"2163247","type":"listingItem","attributes":{"id":2163247,"title":"PROPELLER AP-PR-001-4RH","price":0.0,"description":"Propeller of 150 [mm] in diameter for RC plane. This is Right-hand propeller with blade design AP-PR-001. (see attached drawing for blade and hub design)\n\nContent:\n\nRight-Hand rotation:\n\n- 4 blades propeller (*.stl; *.stp; *.igs)\n- 3x models in total\n- 1x drawing\n\n-------------------------------------------------------------------------------------------------------------\nPlease fill attached form if You would like to order bespoke propeller design.\n-------------------------------------------------------------------------------------------------------------","imageAlt":"3D print model PROPELLER AP-PR-001-4RH","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/mechanical-parts/propeller-ap-pr-001-4rh","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/9Lz1G9uQdWgZyShtKVqsMGPX/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/AP-PR-001-4RH.jpg","gridUrl":"https://media.cgtrader.com/variants/9Lz1G9uQdWgZyShtKVqsMGPX/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/AP-PR-001-4RH.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/mechanical-parts/propeller-ap-pr-001-4rh","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":29,"name":".ige","is_native":false},{"id":72,"name":".stp","is_native":false},{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"mechanical-parts","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Mechanical parts","schemaImageUrl":"https://img-new.cgtrader.com/items/2163247/d33deea781/propeller-ap-pr-001-4rh-3d-model-d33deea781.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6949480","type":"listingItem","attributes":{"id":6949480,"title":"Seawolf Class SSN21 Submarine 1 to 72 scale ready for rc","price":35.0,"description":"Project Seawolf: 1/72 Scale Nuclear Attack Submarine (SSN-21)\nBring the engineering of the world’s most advanced submarine to your own workshop with this detailed 3D design of the US Navy’s Seawolf-class. With a length of approximately 1.5 meters at 1/72 scale.\n\nModel Features:\nMassive Dimensions: A total length of approximately 150 cm (59 inches).\n\nOptimized Segmentation: The hull is divided into approximately 40 individual sections. This ensures a manageable printing process on standard printers and results in a very strong construction after assembly.\n\nAuthentic Propulsion: Features a highly accurate shrouded pump-jet propulsor, including an internal screw. While 3D-printable files for the screw are included, we recommend a brass version for those actually taking it into the water.\n\nFunctional Display: Includes a robust display stand. A clever detail: the base features an integrated storage compartment for tools, electronics, or spare parts.\n\nR/C Capabilities (Radio Control Ready):\nThis model is not just for the display case; it is technically prepared for actual sailing and diving:\n\nSpacious Interior: The hull provides ample room to accommodate a 110mm WTC (Watertight Cylinder).\n\nFlexible Build: Specific mounting files for a 110mm WTC system are available separately on my profile. This allows you to choose between a static display model or a functional R/C submarine.\n\nWhat’s in the Download?\nThe complete set of 40 high-resolution STL files (hull and control surfaces).\n\nSTL files for the modular display stand with a handy storage drawer.\n\nDetailed sail (conning tower) components, including periscopes, radar, and communication masts.\n\nBackground Information:\nThe Seawolf-class (SSN-21 through SSN-23) was developed at the end of the Cold War with one goal: absolute underwater dominance. To this day, they remain the quietest and fastest attack submarines in the US fleet.\n\nOptional: For a functional dive system (vented ballast tank/pump system), you can find the matching 110mm WTC files here: https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/wtc110mm-for-rc-submarine-model\n\nPlease note: The images shown are of the 1/144 scale version; this package concerns the larger 1/72 scale. Digital files are for personal use only.\n\nNo manual included\n\n3D Printing Settings \u0026 Advice\nMinimum Print Bed: 254 x 254 x 254 mm (e.g., Bambu Lab P1 series).\n\nFilament: We recommend ABS-GF (glass-fiber reinforced) or another heat-resistant and impact-resistant filament for the hull.\n\nDetail Work: For the smallest components (periscopes/masts), a Resin printer will provide the sharpest results.","imageAlt":"Seawolf Class SSN21 Submarine 1 to 72 3D printable model 3","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/seawolf-class-ssn21-submarine-1-to-72-scale-ready-for-rc","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/7jr09izob4km875yb3c4fwslj1fh/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Seawolf72_v2_4.jpg","gridUrl":"https://media.cgtrader.com/variants/7jr09izob4km875yb3c4fwslj1fh/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Seawolf72_v2_4.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/seawolf-class-ssn21-submarine-1-to-72-scale-ready-for-rc","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6949480/fdbd357920/seawolf-class-ssn21-submarine-1-to-72-scale-ready-for-rc-3d-model-fdbd357920.webp","saleOffDiscount":0,"eligibleForSubscription":true,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":"premium"}},{"id":"121380","type":"listingItem","attributes":{"id":121380,"title":"OpenRC RC Differential","price":0.0,"description":"\u003cp\u003eInspired by Thing-O-Fun's \"Functional Differential Gear System\" I decided i should make one for my RC car. So i did.\u003c/p\u003e\u003cp\u003eI scaled down the gears from the above mentioned Thing, and designed the rest of the parts in my favourite cad software.\u003c/p\u003e\u003cp\u003eAnd it works surprisingly well, my car is 4WD so i have two of these in the car right now!\u003c/p\u003e","imageAlt":"OpenRC RC Differential 3D print model","url":"https://www.cgtrader.com/free-3d-print-models/games-toys/toy/openrc-rc-differential","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/uGnoUHU5n9jTyESHtv3kKeLT/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/openrc-rc-differential-3d-model-stl-stp.jpg","gridUrl":"https://media.cgtrader.com/variants/uGnoUHU5n9jTyESHtv3kKeLT/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/openrc-rc-differential-3d-model-stl-stp.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/games-toys/toy/openrc-rc-differential","isCgtVerified":true,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":null,"name":null,"is_native":false},{"id":72,"name":".stp","is_native":false},{"id":51,"name":".stl","is_native":false}],"categorySlug":"games-toys","subcategorySlug":"toy","categoryTitle":"Games \u0026 Toys","subcategoryTitle":"Toys","schemaImageUrl":"https://img-new.cgtrader.com/items/121380/c1ab20e392/openrc-rc-differential-3d-model-c1ab20e392.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6843913","type":"listingItem","attributes":{"id":6843913,"title":"Evarts Class Destroyer Escort - 1-48 Scale - 3D Printable - RC","price":35.0,"description":"The Evarts-class destroyer escorts were the United States Navy's pioneering mass-produced escort vessels of World War II, with 97 completed between 1942 and 1944 (from an original plan of 105) in response to urgent Allied needs for anti-submarine convoy protection against German U-boats. Nicknamed the \"short-hull\" design due to their compact 289-foot length and 35-foot beam, these 1,140-ton (standard) to 1,360–1,430-ton (full load) ships featured a distinctive high open bridge and single stack, powered by four General Motors diesel engines in a tandem electric drive system that delivered around 6,000 shp for a top speed of 19–21 knots and a range of about 5,000 nautical miles at 15 knots. Armed primarily for anti-submarine warfare rather than surface combat, they carried three single 3\"/50 dual-purpose guns, various 20mm and later 40mm anti-aircraft weapons, a forward-mounted Hedgehog projector, eight K-gun depth charge projectors, and two stern depth charge racks—lacking torpedo tubes unlike most later classes—while accommodating a crew of roughly 15 officers and 183 enlisted men. The Evarts class (also known as GMT type) proved the viability of the destroyer escort concept, serving effectively in both Atlantic and Pacific convoy duties and hunter-killer groups, with about one-third transferred to the Royal Navy as Captain-class frigates under Lend-Lease, and none lost in U.S. service during the war.\n\n\nAt 1/48 scale the finished model will measure approximately 2850mm long x 230mm wide x 690mm tall from keel to top of mast. Illustrated assembly guide included, in PDF format. 3D files (STL format) were designed in CAD. All parts scaled to fit 250mm x 250mm bed.\n\nSPECIAL THANKS to Sebastian Mulhern of “International War Museum” (https://www.facebook.com/profile.php?id=100068984104523) for supplying plans for the Evarts Class, for building the prototype ship and helping to troubleshoot issues.\n\nAny remaining issues in the model are solely my responsibility!\n\n","imageAlt":null,"url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/evarts-class-destroyer-escort-1-48-scale-3d-printable-rc","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/4ar6nx1670mz27wv6r3rncmym2m6/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Clipboard_02-16-2026_02.jpg","gridUrl":"https://media.cgtrader.com/variants/4ar6nx1670mz27wv6r3rncmym2m6/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Clipboard_02-16-2026_02.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/evarts-class-destroyer-escort-1-48-scale-3d-printable-rc","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":100,"name":".pdf","is_native":false},{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6843913/3ce272aab0/evarts-class-destroyer-escort-1-48-scale-3d-printable-rc-3d-model-3ce272aab0.webp","saleOffDiscount":0,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"premium"}},{"id":"7097181","type":"listingItem","attributes":{"id":7097181,"title":"Kyosho Lazer ZXR Layshaft Parts TM19 TM12 LA56 LA55 LA7 LA6 LAW4","price":0.0,"description":"Layshaft parts including slipper pads (TM12), layshaft (LA55) and LAW4 which was an optional splined drive hub with one way bearing. All of these parts have been measured with a digital vernier caliper and recreated here for those with the equipment and tools to be able to replicate. I cannot promise theyre perfect so I would make a test piece first and check bearing fit etc, before you commit to running a few off the machine. I don't yet have a 5 axis cnc and im willing to bet a very few people reading this will have so ill leave it up to you whether you want to give it a go. \nI have inlcuded the template of the slipper pads so if you need to cut yourself some from a sheet of material the included PDF file is what you will want or you can maybe use the STEP file or STL for your lazer engraver and cut yourself some pads?\nI have included drawings of all the other parts too incase you have the experience and the machinery to create these parts from them. The spline drive on LAW4, LA6 and LA7 has 10 grooves equally spaced.\nI believe the one way roller bearings for LAW4 and LA7 are 8mm OD, 4mm ID and 7mm wide or 6mm wide will probably also do. These bearings are supposed to be a tight press fit.\nFeel free to download and share these files, create the parts and sell or give them out if you're that generous! Many hours of recreation went into these but replicating them is beyond my expertise sadly so I leave it up to you internet....\nYoutube video for all the files - https://youtu.be/A3WvQG3Msh0?si=Ly0Qf-x2fp1rYVGSI","imageAlt":"Kyosho Lazer ZXR Layshaft Parts TM19 TM12 LA56...","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/kyosho-lazer-zxr-layshaft-parts-tm19-tm12-la56-la55-la7-la6-law4","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/y7sn09r0ne0zznof7ki0e8gpbuy7/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/TM12.jpg","gridUrl":"https://media.cgtrader.com/variants/y7sn09r0ne0zznof7ki0e8gpbuy7/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/TM12.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/kyosho-lazer-zxr-layshaft-parts-tm19-tm12-la56-la55-la7-la6-law4","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":72,"name":".stp","is_native":false},{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/7097181/866f8783b4/kyosho-lazer-zxr-layshaft-parts-tm19-tm12-la56-la55-la7-la6-law4-3d-model-866f8783b4.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"5527455","type":"listingItem","attributes":{"id":5527455,"title":"RC Vosper MTB 234 Torpedo Boat Scale Model - 3D Print Optimized","price":30.0,"description":"I'm thrilled to present the completed RC boat model I've been developing! You can check out the linked video and pictures to see the final version in all its glory.\n\nCarefully designed for 3D printing. However, this project goes beyond just printing—it requires some hands-on modeling techniques like assembly, sanding, and painting. It’s a perfect challenge for those who love diving into RC modeling and customizing their builds.\nThis project is close to my heart, especially as I competed in the Hungarian Naviga competition and proudly earned second place in the F2A category with this model.\n\nThe different parts are zipped together and exported into .stl's.\n\nI hope you enjoy building and personalizing this model as much as I have! I would love to see your builds, so feel free to share your progress and any modifications you make.\n\nThis model is 3d printing optimized and also has some holes for screws for additional strength on the hull. Gorilla glue or epoxy can be applied to the inside of the body for extra strenght. (I used gorilla glue)\n\nTotal length: 865 mm \nTotal width:  232 mm\n\nAdditional, helpful infos:\n\nDocumentation: https://www.modellgye.hu/projektek/proj_mtb234\n\nIf you have any question or just need any help, advice, feel free to contact me on \nemail: h.oliver9112@gmail.com\nfacebook: https://www.facebook.com/horvath.oliver.zoltan/\n\nIf you like my work and you'd like to contribute, you can donate via PayPal [https://paypal.me/azoli91] or buy me a Coffee on Ko-fi [https://ko-fi.com/oliverzoltanhorvath].\n","imageAlt":"RC Vosper MTB 234 Torpedo Boat Scale Model - 3...","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/vosper-mtb-234-torpedo-boat-scale-model-print-optimized-design","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/n4sexik1ql9z4y5k50qp4h39dozs/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/1.jpg","gridUrl":"https://media.cgtrader.com/variants/n4sexik1ql9z4y5k50qp4h39dozs/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/1.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/vosper-mtb-234-torpedo-boat-scale-model-print-optimized-design","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":12,"name":".obj","is_native":false},{"id":216,"name":".jpg","is_native":false},{"id":222,"name":".mp4","is_native":false},{"id":215,"name":".png","is_native":false},{"id":72,"name":".stp","is_native":false},{"id":null,"name":null,"is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/5527455/5148466b74/rc-vosper-mtb-234-torpedo-boat-scale-model-3d-print-optimized-3d-model-5148466b74.webp","saleOffDiscount":0,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"premium"}},{"id":"6433605","type":"listingItem","attributes":{"id":6433605,"title":"HMS Sheffield  Radio controlled Model  Instruction booklet","price":0.0,"description":"This is the instruction booklet to make a radio controlled model of the iconic Type 42 destroyer operated by the Royal Navy from 1975 through to 2013.  \n\nThese Type 42 destroyers were used during the Falklands War,  HMS Sheffield herself was destroyed and sunk by an Argetine Exocet missile on the 4th May 1982.\n\nThe booklet contains 30 pages of detailed instructions that is offered here free so that you can understand the process of building the model before purchasing the stl files on cgtrader.\n\nThe model is designed to be built at a scale of 1/72nd creating a model that is 1720mm long, 200mm wide and 500mm tall.\n\nIt is a model that sails extremely well, and will turn heads at a model boating pond.  \n\nThe set of stl files will complete the whole model that you see in the photographs.  The only extras you will need are motors, propellor shafts and rudders.  All hull, superstructure, fittings including railings are part of this comprehensive kit.\n\nEnjoy the build!\n\nHere is a link the stl files available on cgtrader   https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/hms-sheffield-type-42-destroyer-radio-controlled-model","imageAlt":"HMS Sheffield Radio controlled Model Instruction","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/hms-sheffield-radio-controlled-model-instruction-booklet","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/54bifw8fzhvmrtehs2g9dcxile9i/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/20250920_093203.jpg","gridUrl":"https://media.cgtrader.com/variants/54bifw8fzhvmrtehs2g9dcxile9i/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/20250920_093203.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/hms-sheffield-radio-controlled-model-instruction-booklet","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6433605/2c9ea9fb49/hms-sheffield-radio-controlled-model-instruction-booklet-3d-model-2c9ea9fb49.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"7299529","type":"listingItem","attributes":{"id":7299529,"title":"Tug boat full scale 40 inches","price":20.0,"description":"Build this approx. 1000mm tug boat divided in 4 pieces!\n\n really easy to assemble \noptimized for kobra 3 max printer but divideable in many other pieces.\nReady for RC or just for show. Print, glue, play.","imageAlt":"Tug boat full scale 40 inches","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/tug-boat-full-scale-40-inches","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/n4uns1vj99owi9g9w2y2qiby94qs/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/CD3505E4-775D-48BF-9E1D-AF5734037045.jpg","gridUrl":"https://media.cgtrader.com/variants/n4uns1vj99owi9g9w2y2qiby94qs/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/CD3505E4-775D-48BF-9E1D-AF5734037045.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/tug-boat-full-scale-40-inches","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":129,"name":".3mf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/7299529/58b767763d/tug-boat-full-scale-40-inches-3d-model-58b767763d.webp","saleOffDiscount":70,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":"premium"}},{"id":"6281214","type":"listingItem","attributes":{"id":6281214,"title":"Generative Drone Frame V2 - Customizable - F3D Source Included","price":0.0,"description":"Hey CGTrader community,\n\nThis is my second generative drone frame design, and to be honest — I believe it's a solid improvement over the first one. It's cleaner, requires no additional structural parts, and is ready for printing straight away.\n\n Key Features:\n -Generatively designed for strength and efficiency\n\n- Includes the Fusion 360 (.f3d) source file for easy customization\n\nAdd your own camera mount, sensor holders, or modify the arms as you wish\n\n- Optimized for ABS material to ensure better durability under stress\n\n- Lightweight \u0026 rigid frame — ideal for custom FPV builds\n\n Designed in:\n- Fusion 360\nRecommended print method: FDM (with ABS or similar high-strength filament)","imageAlt":"Generative Drone Frame V2 - Customizable - F3D Source","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/generative-drone-frame-v2-customizable-f3d-source-included","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/4c6soi0hfli1fz4l86jm5ye30c8l/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Generative%20Drone%20Frame%202%20v3.jpg","gridUrl":"https://media.cgtrader.com/variants/4c6soi0hfli1fz4l86jm5ye30c8l/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Generative%20Drone%20Frame%202%20v3.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/generative-drone-frame-v2-customizable-f3d-source-included","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":107,"name":".f3d","is_native":true},{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6281214/373fb126a7/generative-drone-frame-v2-customizable-f3d-source-included-3d-model-373fb126a7.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6852642","type":"listingItem","attributes":{"id":6852642,"title":"CATamaran Cat Ship RC Model","price":25.0,"description":"This model was designed at the request of my daughter who asked for a “cat ship” to be crewed entirely by felines. This is a completely custom design that I initially designed with a single hull. After realizing that I was missing the opportunity for a floating dad joke, I corrected my egregious error and redesigned the model to a twin hull design.\n\nThe servo hole aft, the battery holder, and the motor mounts were also custom designed for the parts I intend to use, but I included pictures/ordering info for the items that I designed around in the instructions.\n\nI have included strategic holes/channels for: motor cables from sponsons to superstructure, steering servo cable, and the tail smokestack (for a smoke machine if desired.)\n\nI cut all pieces to be under 250mm in the Z direction, and incorporated more pointed/triangular shapes to eliminate supports as much as possible. Overall dimensions:\nL: 540mm\nW: 260mm\nH: 235mm","imageAlt":"CATamaran Cat Ship RC Model","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/catamaran-cat-ship-rc-model","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/aoq6f3j57ejpseepqsanbo1tj8tw/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Screenshot%202026-02-24%20125433.jpg","gridUrl":"https://media.cgtrader.com/variants/aoq6f3j57ejpseepqsanbo1tj8tw/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Screenshot%202026-02-24%20125433.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/catamaran-cat-ship-rc-model","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6852642/2bd8dee95f/catamaran-cat-ship-rc-model-3d-model-2bd8dee95f.webp","saleOffDiscount":0,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"premium"}},{"id":"6261456","type":"listingItem","attributes":{"id":6261456,"title":"IJN Agano","price":0.0,"description":"3d model of the Japanese light cruiser Agano (The model has no scale)\n\nDo you like the model, but it doesn't suit you? Didn't find what you were looking for? Then write to me and I will make an individual assembly for you.\n\nThe model is completely free and is a test model. If you find any error or something else, please contact me: gfon296@gmail.com\n\nmore models in my cults profile: @Flash_","imageAlt":"IJN Agano 3D print model","url":"https://www.cgtrader.com/free-3d-print-models/miniatures/war/ijn-agano","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/0mu6y74sr74pu64iskh007r23weh/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Screenshot_44.jpg","gridUrl":"https://media.cgtrader.com/variants/0mu6y74sr74pu64iskh007r23weh/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Screenshot_44.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/miniatures/war/ijn-agano","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":5,"name":".fbx","is_native":false},{"id":12,"name":".obj","is_native":false}],"categorySlug":"miniatures","subcategorySlug":"war","categoryTitle":"Miniatures","subcategoryTitle":"War \u0026 Tactics","schemaImageUrl":"https://img-new.cgtrader.com/items/6261456/4090a3b462/ijn-agano-3d-model-4090a3b462.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"2656098","type":"listingItem","attributes":{"id":2656098,"title":"Bait Boat  for carpfishing DIY 3D print model","price":40.0,"description":"RC Bait Boat for Carpfishing. \nFishing rc boat 3D print model. Ideal for carpfishing. \nMaterial for 3d printed: ABS\nThis file is a DIY RC boat. \nAvailable file formats: JPG,  STP, STL, DXF, DWG 20x20cm printing  printing files added.","imageAlt":"hobbydiy Bait Boat for carpfishing DIY 3D print model","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/bait-boat-for-carpfishing-diy-3d-model-3d-print-model","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/Tx42dEE8mdKcH2HGfHydV2WS/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/%C4%B0ki_Renk.jpg","gridUrl":"https://media.cgtrader.com/variants/Tx42dEE8mdKcH2HGfHydV2WS/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/%C4%B0ki_Renk.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/bait-boat-for-carpfishing-diy-3d-model-3d-print-model","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":4,"name":".dwg","is_native":false},{"id":7,"name":".dxf","is_native":false},{"id":72,"name":".stp","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/2656098/269390f407/bait-boat-for-carpfishing-diy-3d-print-model-3d-model-269390f407.webp","saleOffDiscount":50,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"premium"}},{"id":"3434536","type":"listingItem","attributes":{"id":3434536,"title":"stylized ocean with boat and shore","price":0.0,"description":"stylized ocean with boat and shore","imageAlt":"stylized ocean with boat and shore 3D printable model","url":"https://www.cgtrader.com/free-3d-print-models/miniatures/figurines/stylized-ocean-with-boat-and-shore","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/6hPW6yy9R5iVECTBSbHg4vHS/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/%D0%BF%D0%B5%D1%80%D0%B2%D0%B0%D1%8F.jpg","gridUrl":"https://media.cgtrader.com/variants/6hPW6yy9R5iVECTBSbHg4vHS/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/%D0%BF%D0%B5%D1%80%D0%B2%D0%B0%D1%8F.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/miniatures/figurines/stylized-ocean-with-boat-and-shore","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":21,"name":".blend","is_native":true}],"categorySlug":"miniatures","subcategorySlug":"figurines","categoryTitle":"Miniatures","subcategoryTitle":"Action Figures \u0026 Statues","schemaImageUrl":"https://img-new.cgtrader.com/items/3434536/00182f48de/stylized-ocean-with-boat-and-shore-3d-model-00182f48de.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"7304845","type":"listingItem","attributes":{"id":7304845,"title":"USS Sirocco PC 6 - Cyclone Class PC - RC Model 1-96 Scale","price":25.0,"description":"This 1/96 scale model is based on the USS Sirocco (PC 6), a Cyclone class PC. This version reflects the configuration as it stood when I served on her in 2011-2013, with the Mk38 Mod II cannons and Griffin Missile system installed. Initially designed for SEAL operations in river operations, the Cyclone was replaced by shallower-hulled/faster river boats. The mission transitioned to that of littoral patrol in the Arabian Gulf, defending Iraqi oil platforms and conducting Maritime Interdiction Operations. The Sirocco has since been decommissioned and now sails for the Egyptian navy.\n\nI tried to keep all pieces under of 250mm for printing. Overall, this model is roughly 572mm long, 80 mm wide, and 200mm tall at 1/96 scale. Some resin printing will be required for small detail parts.\n\nI have included (in the instructions) some of the running gear that I used in the design of this model. (Motors, battery, rudder tiller construction.) You will find color photos and screenshots from Amazon for noted pieces.","imageAlt":null,"url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/uss-sirocco-pc-6-cyclone-class-pc-rc-model-1-96-scale","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/3dlm1k7g1fy6qg7odwv7yvt9afcq/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Screenshot%202026-07-09%20222704.jpg","gridUrl":"https://media.cgtrader.com/variants/3dlm1k7g1fy6qg7odwv7yvt9afcq/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Screenshot%202026-07-09%20222704.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/uss-sirocco-pc-6-cyclone-class-pc-rc-model-1-96-scale","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/7304845/012ef83118/uss-sirocco-pc-6-cyclone-class-pc-rc-model-1-96-scale-3d-model-012ef83118.webp","saleOffDiscount":0,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"premium"}},{"id":"2542984","type":"listingItem","attributes":{"id":2542984,"title":"Small fishing boat by Printed-Toys","price":0.0,"description":"This toy fits popular brick figures and can float on water. It is great for playing in the pool or bathtub. \n\nAll elements are very easy to print even for begginers. All parts are ready to print on the smallest 3D printers (min. required printing area 80\\*80\\*75 mm).\n\nAll toys are designed to be fun, they have many interesting functions: opening doors, hatches, holds. You can print and build toys together with your children - there are many parts and screws that give a lot of fun. To check more of my projects see: https://www.printed-toys.com\n\n**Needed parts or materials (suggested, you can use other matches parts)**\n\n * glue (nedeed to glue 2 stern elements)\n * 2 very short teflon tubes (2 mm inner diameter, 4 mm outer) to seal the propeller shaft and rudder\n * 4 sets M2.5x6 screw+nut\n * 28 pieces M2.2x6.5 screw (DIN7981)\n * 1 metal rod for propeller shaft (2 mm diameter, 40 mm length)\n * 1 metal rod for rudder shaft (2 mm diameter, 90 mm length)\n * several short pieces of filament 1.75 mm for hinges\n\n**Introduction**\n\n* The toy consists of 38 parts (28 stl files). You can download all archive in one file.\n* I recommend using PLA filament, nozzle 0.4 mm and layer height 0.2 mm, but you can test other settings.\n* All files are in print-ready positions, you don't have to rotate it on your slicer.\n* Print all elements with 100% filling, except for the lifebuoy.stl (25% filling).\n* You will find all wheelhouse windows in the windows-all.stl file, but you can print each one separately from window-***.stl files.\n* There are two versions of propeller: propeller-real.stl and propeller-easy.stl. The first version has real shape but is difficult to print, the second version is very easy to print but after printing you have to put it in hot water and manually bend the propeller blades.\n* Glue the two parts of the stern (hull-stern-A.stl and hull-stern-B.stl) firmly together, check carefully for holes.\n* After placing the propeller and rudder shafts check the hull is not leaking.\n   * If the shafts are leaking you can use oil or grease.\n   * If the hull leaks you can paint or varnish it.\n* Short ships may need to be trimmed by the stern. Before screwing down the deck you can use some ballast to balance the ship.\n* Use pieces of filament 1.75 mm to attach doors and hatches.\n\n**See embedded YouTube video for full assembly instructions**\nor go to https://www.youtube.com/watch?v=zm6ScS5XBBA\n\n**If you would like to support me...**\n* just buy something in my shop https://www.printed-toys.com (You pay what you want!)","imageAlt":"Small fishing boat by Printed-Toys 3D printable model","url":"https://www.cgtrader.com/free-3d-print-models/games-toys/toy/small-fishing-boat-by-printed-toys","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/wgigVY57QEK4KDnCjwz5UPtV/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Preview1.jpg","gridUrl":"https://media.cgtrader.com/variants/wgigVY57QEK4KDnCjwz5UPtV/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Preview1.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/games-toys/toy/small-fishing-boat-by-printed-toys","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"games-toys","subcategorySlug":"toy","categoryTitle":"Games \u0026 Toys","subcategoryTitle":"Toys","schemaImageUrl":"https://img-new.cgtrader.com/items/2542984/7dd0581f71/small-fishing-boat-by-printed-toys-3d-model-7dd0581f71.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"7310767","type":"listingItem","attributes":{"id":7310767,"title":"Gentlemans Runabout 125cm RC Model with Fiat Engines","price":47.0,"description":"The classic gentleman's runabout represents the peak of luxury and speed from the 1920s and 1930s golden age of boating. This custom 125cm-long 3D-printable model captures that iconic era by blending the sleek lines, vertical plumb bows, and streamlined turtle-deck sterns found on historic American Hacker-Craft, Gar Wood, Chris-Craft, Dodge, and Century watercraft. The design is fully RC-ready out of the box, featuring a highly functional articulated rudder mechanism along with dedicated internal DC powertrain and servo motor mounts. For rapid maintenance at the lake, the model includes a massive, three-piece removable main deck hatch that provides wide-open interior access to your batteries and radio control electronics. Additionally, the driver's cockpit section is separately removable, seamlessly concealing a smaller inner access hatch directly underneath it for quick, localized maintenance to the mechanical drivetrain area.\n\n3D printing settings\nEngineered for easy assembly, the massive hull is split into primary segments specifically sliced to fit standard 250mm desktop print beds. The complete pack includes over 80 high-poly STL files alongside a pre-configured, full-color 3MF file for seamless multi-material slicing setup. Every interlocking part features heavy-duty built-in mounting flanges with pre-aligned guide holes, allowing you to use simple screws or cable ties to clamp the segments tightly together while your structural glue or epoxy sets. To further customize your build, the kit includes a premium set of standalone printable accessories like vintage windshield frames, mooring cleats, and deck hardware. The large three-piece main access hatch is also versatile, allowing you to secure it firmly to the hull using either two standard screws or hidden neodymium magnets for quick, toolless access between runs. As a major centerpiece addition, this file pack also comes complete with a detailed, scale-accurate miniature model of a legendary 27-liter, 4-cylinder Fiat marine racing engine to drop into your motor bay. (Some adjustments, shaping and drilling to the motor adapter plate are required)\n\n#rcboat #woodenrunabout #gentlemansrunabout #hackercraft #garwoodspeedster #chriscraft #dodgewatercar #centuryseamaid #vintagespeedboat #mahoganyrunabout #3dprintableboat #largescalerc #125cmboat #250mmprintbed #interlockinghull #dcmotorrc #servomount #functionalrudder #magnetichatch #scalemodelboatkit #fiatmarineengine #3mffile #highpolystl","imageAlt":"Gentlemans Runabout 125cm RC Model with Fiat E...","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/gentlemans-runabout-125cm-rc-model-with-fiat-engines","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/bdbskxy50kjqj7n82h7b2x2qaip7/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/00.jpg","gridUrl":"https://media.cgtrader.com/variants/bdbskxy50kjqj7n82h7b2x2qaip7/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/00.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/gentlemans-runabout-125cm-rc-model-with-fiat-engines","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":129,"name":".3mf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/7310767/b7de8bd8a1/gentlemans-runabout-125cm-rc-model-with-fiat-engines-3d-model-b7de8bd8a1.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6521699","type":"listingItem","attributes":{"id":6521699,"title":"Drone TinyWhoop Frame 3D Print Ready","price":0.0,"description":"Drone TinyWhoop Frame 3D Print Ready\nFile Types : .blend, .STL\n\nFor communication and orders:\nEmail: svyato.2004@gmail.com","imageAlt":"drone Drone TinyWhoop Frame 3D Print Ready","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/drone-tinywhoop-frame-3d-print-ready","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/dv7he29if9b13s9c6st3kksqtsbg/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Drone.jpg","gridUrl":"https://media.cgtrader.com/variants/dv7he29if9b13s9c6st3kksqtsbg/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Drone.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/drone-tinywhoop-frame-3d-print-ready","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":21,"name":".blend","is_native":false},{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6521699/e50a7e1417/drone-tinywhoop-frame-3d-print-ready-3d-model-e50a7e1417.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6128467","type":"listingItem","attributes":{"id":6128467,"title":"Rc NIGHTSEEKER boat","price":39.0,"description":"rc NIGHTSEEKER boat, designed by me.\n\nuses one 540 motor and servo.\n\nneeds 2mm screws and glue.\n\nyou can use any 540 motor and esc you want.\n\nthe boat is in two pices and needs to be glued togheter.\n\npartlist:\n\nrudder x2 ( 75mm):\nhttps://www.aliexpress.com/item/4000017721059.html?spm=a2g0o.order_list.order_list_main.206.36a018020bWuhv\n\ndriveshaft and propeller (L25cm 025-4x3.18mm):\nhttps://www.aliexpress.com/item/32468832540.html?spm=a2g0o.order_list.order_list_main.210.36a018020bWuhv\n\nsteering rod 1x (200mm):\nhttps://www.aliexpress.com/item/32723438808.html?spm=a2g0o.order_detail.order_detail_item.5.7db6f19cgtmVJ4\n\nheatsink:\nhttps://www.aliexpress.com/item/32723438808.html?spm=a2g0o.order_detail.order_detail_item.5.7db6f19cgtmVJ4\n\nRemote Control w/ Receiver:\nhttps://www.aliexpress.com/item/1005002492080867.html?spm=a2g0o.order_list.order_list_main.370.36a018020bWuhv\n\n3D printing settings\nneeds 250x250x400 printer, if not you could probably split the hull one more time.\n\nuse support on some parts.","imageAlt":"3D print model Rc NIGHTSEEKER boat","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/rc-nightseeker-boat","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/52phbdqg3z25f7ugg7irl2jyfilz/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/435407834_390317993837440_8137127439100228631_n.jpg","gridUrl":"https://media.cgtrader.com/variants/52phbdqg3z25f7ugg7irl2jyfilz/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/435407834_390317993837440_8137127439100228631_n.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/rc-nightseeker-boat","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6128467/edf7080ac8/rc-nightseeker-boat-3d-model-edf7080ac8.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"3107029","type":"listingItem","attributes":{"id":3107029,"title":"GARAGE WORKSHOP OBJECTS PACK","price":0.0,"description":"Objects for garage, workshop (oficina, werkstatt, atelier mécanique)\n\nIt includes:\n-Car ramp,\n-Tool box\n-Transport cart\n\n3D PRINTING SETTINGS\nThe items are in 1/10 scale. Please, resize it as you want:\n\n1/18 = Scale to 0.55 (55%)\n1/20 = Scale to 0.50 (50%)\n1/24 = Scale to 0.416 (41.6%)\n1/25 = Scale to 0.40 (40%)\n1/32 = Scale to 0.312 (31.2%)\n1/48 = Scale to 0.21 (21%)","imageAlt":"GARAGE WORKSHOP OBJECTS PACK 3D printable model","url":"https://www.cgtrader.com/free-3d-print-models/miniatures/vehicles/garage-workshop-objects-pack","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/2auvT8vf3eXB6czzEjf527iT/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/0016.jpg","gridUrl":"https://media.cgtrader.com/variants/2auvT8vf3eXB6czzEjf527iT/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/0016.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/miniatures/vehicles/garage-workshop-objects-pack","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"miniatures","subcategorySlug":"vehicles","categoryTitle":"Miniatures","subcategoryTitle":"Cars \u0026 Vehicles","schemaImageUrl":"https://img-new.cgtrader.com/items/3107029/0e8f77fa8c/garage-workshop-objects-pack-3d-model-0e8f77fa8c.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"7211759","type":"listingItem","attributes":{"id":7211759,"title":"BPB Co 71 6 MTB 488 Torpedo Boat Scale Model","price":55.0,"description":"The whole assembly has been tested and optimized for FDM 3D printing. It is available as a whole boat or by parts.\n\nCompleted model 3s battery test: https://youtu.be/LY5SyJIdY4w\nFirst water test with 4s battery: https://youtu.be/d-l-uvD0H_U\n\nScale: 1:24\n\nTotal length: 937 mm\nTotal width: 265 mm\n\nBlog-like documentation about the progress:\nhttps://www.modellgye.hu/projektek/proj_mtb488\n\nAbout the REAL boat\n\nBuilder: British Power Boat (Hythe).\nOrdered (MGB 169): 10.04.1943.\nCompleted (MTB 488): 06.09.1944.\n\nBooks used:\nCoastal Craft Historry Volume 2 - British Power Boat Company\nBrisith Naval Weapons of World War II - The John Lambert Collection Volume III\n\nIf you have any question or just need any help, advice, feel free to contact me on\nemail: h.oliver9112@gmail.com\nfacebook: https://www.facebook.com/horvath.oliver.zoltan/\n\nVosper MTB 234:\nhttps://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/vosper-mtb-234-torpedo-boat-scale-model-print-optimized-design\n\nIf you like my work and you'd like to contribute, you can donate via PayPal [https://paypal.me/azoli91] or buy me a Coffee on Ko-fi [https://ko-fi.com/oliverzoltanhorvath].","imageAlt":"BPB Co 71 6 MTB 488 Torpedo Boat Scale Model","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/bpb-co-71-6-mtb-488-torpedo-boat-scale-model","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/2sgp0cpt0pilua0ej6t70m9sgq9g/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/721880897_26731613959868171_6765057524872642360_n.jpg","gridUrl":"https://media.cgtrader.com/variants/2sgp0cpt0pilua0ej6t70m9sgq9g/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/721880897_26731613959868171_6765057524872642360_n.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/bpb-co-71-6-mtb-488-torpedo-boat-scale-model","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":129,"name":".3mf","is_native":false},{"id":216,"name":".jpg","is_native":false},{"id":215,"name":".png","is_native":false},{"id":220,"name":".gcode,","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/7211759/aef7a537d3/bpb-co-71-6-mtb-488-torpedo-boat-scale-model-3d-model-aef7a537d3.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6821941","type":"listingItem","attributes":{"id":6821941,"title":"Custom RoboClaw 2x60 ESC Case","price":0.0,"description":"A custom case I made for my RoboClaw 2x60 Motor controller. \n\nHoles made for M3 screws.\n\nDimensions in milimeters: 127mm x 149mm x 43mm\n\nMade in Blender 3.5\n\n","imageAlt":"3D print model Custom RoboClaw 2x60 ESC Case","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/custom-3d-printable-roboclaw-2x60-esc-case","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/a4osfbytl3f8vv35iyks6w5s9znv/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/RC1.jpg","gridUrl":"https://media.cgtrader.com/variants/a4osfbytl3f8vv35iyks6w5s9znv/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/RC1.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/custom-3d-printable-roboclaw-2x60-esc-case","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6821941/1545ad3c07/custom-roboclaw-2x60-esc-case-3d-model-1545ad3c07.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"7294221","type":"listingItem","attributes":{"id":7294221,"title":"USCG Point Class Cutter 1 34 scale RC Ready","price":47.0,"description":"The USCG Point Class Cutters were a distinguished fleet of patrol boats introduced in the early 1960s, designed for search and rescue, law enforcement, and coastal defense missions. Typically 83 feet (25 meters) long, these vessels were known for their rugged design, twin diesel engines, and versatility in harsh coastal conditions. Our 3D model, scaled at 1:34 (730 mm or 28.7 inches in length), captures the sleek lines and versatile functionality of these historic vessels. The hull and superstructure are modular, with just 8 hull pieces and 2 superstructure parts, all designed to fit printers with a 220 × 220 × 250 mm build volume. Once assembled, the model can be outfitted with over 180 accessories provided in the STL pack, including a color 3MF file to streamline the process.\n\n3D printing settings\nThe 3D printing and assembly of this model are designed for simplicity without sacrificing detail. Each part includes alignment bosses, so the initial hull and superstructure assembly is straightforward, even for beginners. Once the basic structure is built, the builder can choose from a wide range of accessories, from weapons to deck equipment. Additionally, all original hatches are functional, with a large aft deck hatch and removable bridge for easy interior access. Whether you build it as a detailed display or a full RC project, this model offers a perfect balance of accessibility and complexity.","imageAlt":"USCG Point Class Cutter 1 34 scale RC Ready","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/uscg-point-class-cutter-1-34-scale-rc-ready","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/oq2cx30lpuyazfv7h5aul7u1wf8d/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/00.jpg","gridUrl":"https://media.cgtrader.com/variants/oq2cx30lpuyazfv7h5aul7u1wf8d/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/00.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/uscg-point-class-cutter-1-34-scale-rc-ready","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":129,"name":".3mf","is_native":false},{"id":null,"name":null,"is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/7294221/ca250a8f6c/uscg-point-class-cutter-1-34-scale-rc-ready-3d-model-ca250a8f6c.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"7137600","type":"listingItem","attributes":{"id":7137600,"title":"Soviet K Class Submarine Warship","price":0.0,"description":"1/1800th scale K-Class submarine model. Certain elements not to scale.\n\nThe Soviet K-class (Katyusha-class) submarines were large “cruiser submarines” built from 1936–1943 for long-range operations with the Soviet Navy. Twelve were planned, 11 were completed, and 5 were lost during World War II. Their armament was unusually heavy for submarines of the period: ten 533 mm torpedo tubes (six bow and four stern, with two stern tubes mounted externally), two 100 mm deck guns, two 45 mm guns, and capacity for 20 naval mines. They were designed for fleet scouting and commerce raiding, combining high speed with stronger gun armament than many contemporary submarines.\n\nThis model is designed and tested at 1/1800th scale, but up-scaling and down-scaling are possible. Since the model is optimized for 1/1800th scale, it is not ideal to print larger versions due to a lack of detail. The gun barrels and mast have been enlarged.\n\nThis is part of my collection of WWII warships, keep an eye out for more to come. If you have a specific request, message me and I'll bump it up my list.\n\nTested with PLA at .08mm layer height with .4mm nozzle.","imageAlt":null,"url":"https://www.cgtrader.com/free-3d-print-models/miniatures/vehicles/soviet-k-class-submarine-warship","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/ozcv2eb13k6tm3oriea2g1q9q0z1/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/soviet-k-class-submarine-warship-3d-model-5ea70d7046.jpg","gridUrl":"https://media.cgtrader.com/variants/ozcv2eb13k6tm3oriea2g1q9q0z1/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/soviet-k-class-submarine-warship-3d-model-5ea70d7046.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/miniatures/vehicles/soviet-k-class-submarine-warship","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":189,"name":".ply","is_native":false},{"id":51,"name":".stl","is_native":false},{"id":12,"name":".obj","is_native":false}],"categorySlug":"miniatures","subcategorySlug":"vehicles","categoryTitle":"Miniatures","subcategoryTitle":"Cars \u0026 Vehicles","schemaImageUrl":"https://img-new.cgtrader.com/items/7137600/5ea70d7046/soviet-k-class-submarine-warship-3d-model-5ea70d7046.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"4124517","type":"listingItem","attributes":{"id":4124517,"title":"10th Scale RC Airboat 3D Printer Files and Instructions","price":19.95,"description":"3D Print your own 1/10th scale R/C Airboat model \"The Swamp Skeeter\" using these digital STL files and instructions.\n\nFiles provided:\n\n16 Page photo illustrated instructions including tools list and material list, RC components, and running hardware\nSTL files for every component\nPDF drawings decal artwork, \u0026 templates\n\nYou won't find this in any store. But, other RC Airboat models can cost as much as $300 bucks and don't have near as much detail!  With these plans; you can make your own for less than $50 in materials! And, you can make one for your friends and family as well!\n\nThe final dimensions of this boat are: 26\" long x 9-1/2\" wide x 10\" tall. The parts print small enough to fit on any table-top printer with a 9\" x 9\" bed size.\n\nThis is a solid model that will provide hours of enjoyment in building and running. This model is sure to turn heads down on the bayou and makes a great rescue boat as well.\n\nAs always; please feel free to message me if you have any questions. Thank you!","imageAlt":"10th Scale RC Airboat 3D Printer Files and Instructions","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/electronics/10th-scale-rc-airboat-3d-printer-files-and-instructions","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/4rwijoite6sct9KS7cqpD3fs/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/close%20up%202.jpg","gridUrl":"https://media.cgtrader.com/variants/4rwijoite6sct9KS7cqpD3fs/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/close%20up%202.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/electronics/10th-scale-rc-airboat-3d-printer-files-and-instructions","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"electronics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Electronics","schemaImageUrl":"https://img-new.cgtrader.com/items/4124517/29941e313e/10th-scale-rc-airboat-3d-printer-files-and-instructions-3d-model-29941e313e.webp","saleOffDiscount":30,"eligibleForSubscription":true,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":"premium"}},{"id":"4343672","type":"listingItem","attributes":{"id":4343672,"title":"Assembly Manual - 3D Printed YF-23 Black Widow II","price":0.0,"description":"= Maiden Flight Video footage=\nhttps://youtu.be/VmuEtvmx6T4\n\nThis is a scaled-down replica of the R/C version of YF-23 Black Widow II\nBefore trying to build this airplane, you'll want to know how to build it and what you'll need first.\nThe shape of each part and the assembly method and sequence are indicated in the assembly manual.\nYou can also check photos and print conditions for assembly reference.\n\n3D PRINTING SETTINGS\n\nDetailed information is included in the manual file.\nPrint the test part with reference to the parameters presented. The actual wall thickness that should be printed is,\n\nLW-PLA / Gyroid infill 3.5% / Combing mode\nBottom layer : 3 / Top Layer : 3\nstab_L01.stl -\u003e 1 Wall Thickness 0.4~0.5mm","imageAlt":"Free Assembly manual - 3D Printed YF-23 Black Widow II","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/free-assembly-manual-3d-printed-yf-23-black-widow-ii","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/vbCNNLest157hei92FDgiT96/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/message-editor_1542190191127-f-23-9_1920acopy.jpg","gridUrl":"https://media.cgtrader.com/variants/vbCNNLest157hei92FDgiT96/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/message-editor_1542190191127-f-23-9_1920acopy.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/free-assembly-manual-3d-printed-yf-23-black-widow-ii","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":100,"name":".pdf","is_native":false},{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/4343672/427b215a64/assembly-manual-3d-printed-yf-23-black-widow-ii-3d-model-427b215a64.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6899520","type":"listingItem","attributes":{"id":6899520,"title":"Cabin Cruiser Boat RC Model","price":20.0,"description":"This model was designed at the request of my youngest son. (Admittedly, he just asked for a “boat,” so I decided on a cabin cruiser style.)  This is a design I created myself after looking at many different pictures online, and I wanted to focus on simplicity. There are only 10 parts to print.\n\nThe motor mount was designed to hold a receiver and small ESC for a small rectangular motor. It was based on various parts I had in my RC “junk drawer,” so you may need to develop your own running gear setup.\n\nThe longest piece of this model is 213mm long. Overall dimensions are L: 400mm, W: 130mm, H: 126mm.","imageAlt":"Cabin Cruiser Boat RC Model","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/cabin-cruiser-boat-rc-model","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/j7vzskjsunopiipuvlevrq0dz3ui/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Screenshot%202026-03-13%20133437.jpg","gridUrl":"https://media.cgtrader.com/variants/j7vzskjsunopiipuvlevrq0dz3ui/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Screenshot%202026-03-13%20133437.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/cabin-cruiser-boat-rc-model","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6899520/e57c2096de/cabin-cruiser-boat-rc-model-3d-model-e57c2096de.webp","saleOffDiscount":0,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"premium"}},{"id":"6283706","type":"listingItem","attributes":{"id":6283706,"title":"1 10th Scale Gort Robot Figure","price":0.0,"description":"Boomers will easily recognize Gort, the alien robot from the 1951 classic sci-fi movie \"The Day the Earth Stood Still\".\n\nThe generation of this 3d printable robot figure showcases the immense capability of the AI driven 2d image to 3d model TRIPO3D tool (online) @\n\nhttps://studio.tripo3d.ai/home\n\nA screencap of Gort from the movie (available on you-tube) was used as a source image to generate and download the raw 3d model. Sketchup and Blender was then used to clean it up for a 3d printable stl file. \nTrees supports are required if the figure is printed tsanding up.\n\nGort was 8 feet tall so the resulting 1/10th scale figure is 250mm tall. Source Sketchup abd Blender files are included.\n\nThe tripo3d.ai  tools offers tremendous opportunities for creating scale figures for model ships, aircraft, cars, dioramas, etc..\n\nKlatuu Barada Nikto!\n\nbensworx\n\n\n\n","imageAlt":"1 10th Scale Gort Robot 3D printable model","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/1-10th-scale-gort-robot-figure","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/vmb1oqw1hd19fq415iblmh3b7284/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Gort_02.jpg","gridUrl":"https://media.cgtrader.com/variants/vmb1oqw1hd19fq415iblmh3b7284/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Gort_02.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/1-10th-scale-gort-robot-figure","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":14,"name":".skp","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6283706/2d9fce535e/1-10th-scale-gort-robot-figure-3d-model-2d9fce535e.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"7004502","type":"listingItem","attributes":{"id":7004502,"title":"Allen M Sumner Destroyer - 1-72 Scale - 3D Printable - RC Model","price":35.0,"description":"The Allen M. Sumner-class destroyer was a highly capable U.S. Navy warship design introduced late in World War II, representing an evolution of earlier destroyers with a strong emphasis on anti-aircraft firepower and survivability. Compared to its predecessors, it featured a broader beam for improved stability and carried six 5-inch/38 caliber dual-purpose guns in three twin turrets, giving it formidable surface and anti-air capability, along with a heavy suite of anti-aircraft weapons and ten torpedo tubes. Equipped with advanced radar and fire-control systems for its time, the class proved effective in screening carrier task forces and defending against aircraft, particularly during the Pacific campaign. A total of 58 ships were built, many of which continued to serve into the Cold War after modernization upgrades, demonstrating the design’s durability and adaptability.\n\nAt 1/72 scale the finished model will measure approximately 1600mm long x 180mm wide x 435mm tall from keel to top of mast. Illustrated assembly guide included, in PDF format. 3D files (STL format) were designed in CAD. All parts scaled to fit 250mm x 250mm bed. Alternative split hull build for ease of transport.\n","imageAlt":"Allen M Sumner Destroyer - 1-72 Scale - 3D Printable - RC","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/allen-m-sumner-destroyer-1-72-scale-3d-printable-rc-model","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/if03pu58mdd6w7vbg5f2m78me7e3/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Clipboard_04-12-2026_02.jpg","gridUrl":"https://media.cgtrader.com/variants/if03pu58mdd6w7vbg5f2m78me7e3/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Clipboard_04-12-2026_02.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/allen-m-sumner-destroyer-1-72-scale-3d-printable-rc-model","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":100,"name":".pdf","is_native":false},{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/7004502/6b209df2c7/allen-m-sumner-destroyer-1-72-scale-3d-printable-rc-model-3d-model-6b209df2c7.webp","saleOffDiscount":0,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"premium"}},{"id":"4018638","type":"listingItem","attributes":{"id":4018638,"title":"Assembly Manual - SZD-55 RC Scale Sailplane","price":0.0,"description":"3D MODEL DESCRIPTION\n\nBefore trying to build this airplane, you'll want to know how to build it and what you'll need first.\n\nThe shape of each part and the assembly method and sequence are indicated in the assembly manual.\n\nYou can also check photos and print conditions for assembly reference.\n\nIn order to reach this kind of result and feel a sense of accomplishment, good skill of 3d printed parts assembly, printer operation ability, and an understanding of R/C are required.\n\nFirst of all, it requires meticulous patience.\n\nContact\ne-mail : rah66@hanmail.net\n\nfacebook : https://www.facebook.com/profile.php?id=100078820971516\n\nYoutube : https://www.youtube.com/channel/UCGGvpPkwdtyBjYLQHSdkeDg\n\n3D PRINTING SETTINGS\nDetailed information is included in the manual file.\n\nPrint the test part with reference to the parameters presented. The actual wall thickness that should be printed is\n\nLW-PLA / VASE MODE(Spiralize outer contour)\nBottom layer : 2 / Top Layer : 0\nNewing_L11 - 1 Wall Thickness 0.5~0.55mm","imageAlt":"Assembly Manual - SZD-55 RC Scale 3D printable model 1","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/manual-szd-55-rc-scale-sailplane","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/p8bkroip8Ef6bfM4BExtpG1v/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/s20220704_084103.jpg","gridUrl":"https://media.cgtrader.com/variants/p8bkroip8Ef6bfM4BExtpG1v/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/s20220704_084103.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/manual-szd-55-rc-scale-sailplane","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":100,"name":".pdf","is_native":false},{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/4018638/4c9425d507/assembly-manual-szd-55-rc-scale-sailplane-3d-model-4c9425d507.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"3367435","type":"listingItem","attributes":{"id":3367435,"title":"cargo ship miniature for RC","price":15.0,"description":"this is stl file rc mini cargo ship for 3d printer.\n\nthe model was tested in ender 3v2 with 0.4 nozle\n\nthe model is separate into a part (modular)\n\nthe native dimension is\n\nlength : 45 cm widht : 9 cm height : 9 cm\n\nwhat you need to built this\n1. bolt m2.5/2 20mm 23x\n2. bolt m2.5/2 35mm 3x\n3. mini motor dc for (shaft and bearing) for waterproof bearing propeller\n\nwhat you get:\n1. stl file and pdf instruction\n\nyou can scale it but you need bolt size scaled too.","imageAlt":"cargo ship miniature for RC 3D print model","url":"https://www.cgtrader.com/3d-print-models/miniatures/vehicles/cargo-ship-miniature-for-rc","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/6Keui8TULvpdHF3Ug98PCVmc/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/IMG20211105064638.jpg","gridUrl":"https://media.cgtrader.com/variants/6Keui8TULvpdHF3Ug98PCVmc/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/IMG20211105064638.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/miniatures/vehicles/cargo-ship-miniature-for-rc","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":100,"name":".pdf","is_native":false}],"categorySlug":"miniatures","subcategorySlug":"vehicles","categoryTitle":"Miniatures","subcategoryTitle":"Cars \u0026 Vehicles","schemaImageUrl":"https://img-new.cgtrader.com/items/3367435/cde63d306e/cargo-ship-miniature-for-rc-3d-model-cde63d306e.webp","saleOffDiscount":0,"eligibleForSubscription":true,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":"premium"}},{"id":"6922641","type":"listingItem","attributes":{"id":6922641,"title":"Collectible Benchy style Bismark","price":0.0,"description":"3D model description\nThis creative design reimagines the classic 3D printing test boat as a battleship inspired by the legendary Bismarck, blending calibration functionality with powerful naval aesthetics. The model preserves the iconic Benchy proportions while incorporating warship-style elements, giving it a bold and aggressive appearance.\n\nPerfect as both a calibration test and a collectible display piece, this STL allows makers to evaluate print quality while enjoying a unique military-inspired design. The combination of familiar geometry and detailed styling makes it ideal for showcasing printer performance.\n\nOptimized for both FDM and resin printing, the model maintains clean geometry and reliable print behavior while enhancing visual impact.\n\nA classic test model reimagined with battleship strength.\n\n3D printing settings\n• Recommended layer height: 0.16–0.2 mm for general calibration\n• Use 2–3 perimeters to evaluate wall quality\n• 10–15% infill for standard testing\n• Print without supports for true benchmark results\n• Adjust speed and cooling to test performance\n• Ideal for comparing filaments and slicer settings\n• Resin printing enhances fine decorative details","imageAlt":null,"url":"https://www.cgtrader.com/free-3d-print-models/art/sculpture/collectible-benchy-style-bismark","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/34oqvcvz4l0vggzm8t8wz404r1aq/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Benchy%20Bismark%2001.jpg","gridUrl":"https://media.cgtrader.com/variants/34oqvcvz4l0vggzm8t8wz404r1aq/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Benchy%20Bismark%2001.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/art/sculpture/collectible-benchy-style-bismark","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"art","subcategorySlug":"sculpture","categoryTitle":"Art \u0026 Design","subcategoryTitle":"Sculptures","schemaImageUrl":"https://img-new.cgtrader.com/items/6922641/e2c28632b8/collectible-benchy-style-bismark-3d-model-e2c28632b8.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"7319819","type":"listingItem","attributes":{"id":7319819,"title":"Pilot boat full scale 40 inches","price":20.0,"description":"Pilot boat full scale 1000 mm length 300mm width 200 mm height\nDivided in 3 parts. assembly needed nothing major\nThe hull part needs to be infilled at 0% if you want to RC it for electronics","imageAlt":"Pilot boat full scale 40 inches","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/pilot-boat-full-scale-rc-capable","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/og2dj93soandfecv3dzh6nuxdv4j/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Unknown-2.jpg","gridUrl":"https://media.cgtrader.com/variants/og2dj93soandfecv3dzh6nuxdv4j/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Unknown-2.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/pilot-boat-full-scale-rc-capable","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":129,"name":".3mf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/7319819/5865c5dd11/pilot-boat-full-scale-40-inches-3d-model-5865c5dd11.webp","saleOffDiscount":70,"eligibleForSubscription":true,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":"premium"}},{"id":"4370398","type":"listingItem","attributes":{"id":4370398,"title":"Free 3D printable model ENGINE old Truck ","price":0.0,"description":"If you don’t have the engine you need for the truck, but you really want to install at least something.\n\nSpecs: 1:10\t\n•1:12\t\n•1:14\t\n•1:16\t\n•1:24\t\n•1:25\t\n•1:32\t\n•1:35\t","imageAlt":"Free 3D printable model ENGINE old Truck auto","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/free-3d-printable-model-engine-old-truck","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/ghfhn8Aj8kWKFxGGSWgRZqc3/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/0_1Engine_old_truck.jpg","gridUrl":"https://media.cgtrader.com/variants/ghfhn8Aj8kWKFxGGSWgRZqc3/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/0_1Engine_old_truck.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/free-3d-printable-model-engine-old-truck","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"automotive","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Automotive \u0026 Car parts","schemaImageUrl":"https://img-new.cgtrader.com/items/4370398/bf49a95f93/free-3d-printable-model-engine-old-truck-3d-model-bf49a95f93.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6876597","type":"listingItem","attributes":{"id":6876597,"title":"Oberon Class Submarine 1 to 50 scale for RC","price":35.0,"description":"1/50 Oberon-Class Submarine – High-Detail R/C Scale Model\nBring a legend of the Cold War to the water with this highly accurate 1/50 scale replica of the Oberon-Class Submarine. Known for being among the quietest conventional submarines of their era, the \"O-boats\" are a favorite for scale enthusiasts due to their sleek, menacing lines and iconic bow dome.\n\nThe Real Legend: Specifications\nThe Oberon-class was the pinnacle of British post-war conventional submarine design.\n\nLength: 89.9 meters (295 ft)\n\nBeam: 8.1 meters (26.5 ft)\n\nSpeed: 12 knots surfaced / 17 knots submerged\n\nRole: Long-range patrol and surveillance\n\nModel Overview\nThis model has been engineered specifically for Radio Control (R/C) conversion. Unlike static models, the internal architecture is designed to house a 100mm WTC (Watertight Cylinder).\n\nScale: 1/50\n\nLength of Model: Approx. 180 cm (70.8 inches)\n\nHull Design: The hull is split longitudinally (horizontal split). This provides superior access to the internal components, linkage setup, and WTC placement compared to traditional vertical cuts.\n\nWTC Compatibility: Designed to fit a 100mm diameter WTC (Note: WTC and electronics are not included).\n\nFunctional Features: The files include internal preparations to make the periscopes and masts electrically retractable, allowing for ultimate realism on the water.\n\nTechnical Features\nOptimized for Printing: Divided into manageable sections to fit standard large-format printers while maintaining structural integrity.\n\nScale Detail: Includes accurate rivet patterns (where applicable), casing vents, rudder assemblies, and the distinctive sonar bow.\n\nEasy Access: The split-hull design makes maintenance and battery swaps at the lakeside quick and easy.\n\nWhat’s Included?\nHigh-resolution STL files for the full hull, conning tower (fin), and control surfaces.\n\nInternal support structures for the 100mm WTC mounting.\n\nDetailed assembly for the rudder and dive plane linkages.\n\nNote: This is a digital STL file pack for 3D printing. To make the model operational, you will need a 100mm WTC, motor, ESC, servos, battery, and R/C gear.","imageAlt":"Oberon Class Submarine 1 to 50 scale 3D printable model 1","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/oberon-class-submarine-1-to-50-scale-for-rc","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/6cglbwwrs5zpmdo3tq5v8xm5l8lw/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Oberon-class-submarine-model-3d-1.jpg","gridUrl":"https://media.cgtrader.com/variants/6cglbwwrs5zpmdo3tq5v8xm5l8lw/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Oberon-class-submarine-model-3d-1.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/oberon-class-submarine-1-to-50-scale-for-rc","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6876597/5e79a8888c/oberon-class-submarine-1-to-50-scale-for-rc-3d-model-5e79a8888c.webp","saleOffDiscount":0,"eligibleForSubscription":true,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":"premium"}},{"id":"2774550","type":"listingItem","attributes":{"id":2774550,"title":"Arrma Felony real air intake","price":0.0,"description":"This is a real air intake for Arrma Felony.\nTo let the air flows inside the shell and cool the electronics It's necessary to trim a squared hole over the body, in between the two screws holes where you normally mount the optional fake stock air intake. The air pushed will be purged by the rear openings of the car.","imageAlt":"3D printable model Arrma Felony real air intake","url":"https://www.cgtrader.com/free-3d-print-models/miniatures/vehicles/arrma-felony-real-air-intake","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/8fTuLmj26GVwyyQA1kTbvd7U/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/241282357_105836961837158_4085018200787427129_n.jpg","gridUrl":"https://media.cgtrader.com/variants/8fTuLmj26GVwyyQA1kTbvd7U/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/241282357_105836961837158_4085018200787427129_n.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/miniatures/vehicles/arrma-felony-real-air-intake","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"miniatures","subcategorySlug":"vehicles","categoryTitle":"Miniatures","subcategoryTitle":"Cars \u0026 Vehicles","schemaImageUrl":"https://img-new.cgtrader.com/items/2774550/fd85ee6770/arrma-felony-real-air-intake-3d-model-fd85ee6770.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6205219","type":"listingItem","attributes":{"id":6205219,"title":"M FISH Bait Boat STL 3D Print Your Own RC Carp Fishing Boat","price":35.0,"description":"**M_FISH – STL Files for 3D Printing a Carp Bait Boat (Radio-Controlled Fishing Feeder Boat)\n\nIMPORTANT – Build Plate Size: Your 3D printer must have a minimum build volume of 200×200×200 mm. Parts will NOT fit on smaller printers.**\n\n NEW SUPPORT-FREE VERSION – Save Up to 200g of Filament!\nThe internal structure has been completely redesigned. The hull prints without any internal supports. All internal bulkheads are now separate parts that are glued in after printing. This saves filament and eliminates tedious post-processing.\n Model Specifications\nLength: 720 mm (28.3 in)\nWidth: 360 mm (14.2 in)\nHeight: 229 mm (9.0 in)\nShaft diameter: 12 mm (compatible with standard water-jet and propeller systems)\nFormat: STL (millimeters), optimized for FDM printing\nRecommended material: PETG (recycled PETG is highly recommended)\nWhy Choose M_FISH?\n Proven stability and maneuverability – extensively tested in real fishing conditions\n Flexible motor configuration – supports 1 or 2 motors (water-jet or impeller)\n Autopilot-ready – ESP32 + LoRa system in development (free updates included)\n Eco-friendly design – optimized for printing with recycled PETG bottles\n Perfect balance of strength and flexibility for marine environments\nRecommended Print Settings (PETG)\nParameter\tValue\nNozzle diameter\t0.6 mm\nLayer height\t0.3 mm\nNozzle temp\t235–245 °C\nBed temp\t70–80 °C\nInfill (hull)\t10% Gyroid\nOuter wall speed\t30 mm/s (for watertightness)\nTop layers\t7 (to prevent deck sagging)\nBulkhead infill\t15% Gyroid\nCooling fan\t20–30%\nAdhesion\tBrim or raft recommended\n Estimated total print time: ~100 hours (varies by printer)\n What You Get Today\nComplete STL files for all hull parts and internal bulkheads (current version)\nFREE UPCOMING UPDATES (Added to Your Archive Automatically)\nOnce electronics testing is complete, you'll receive:\nAluminum shaft cutting blueprint (6 mm)\nSonar mounting plugs (turn your boat into an echo-sounder scout)\nAction camera mount (GoPro-compatible)\nDual-impeller adapters (for extra thrust)\nESP32 + LoRa autopilot wiring diagram and pinout\n Who Is This For?\nAnglers who want a reliable bait-delivery system without buying expensive ready-made boats\n3D printing enthusiasts looking for a practical, large-scale project\nDIY makers who enjoy customizing electronics and RC systems\n Important Note\nThe current price reflects the STL files only. Electronics, motors, and RC components are NOT included. Once the autopilot system is fully tested and released, the price will approximately double. Get it now while it's still at the introductory price!","imageAlt":"Boat Bait Carp Fishing 3D print model M-FISH-3D","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/mechanical-parts/carp-fishing-boat-stl-model-m-fish-3d-printable","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/50i07792260su1l1z6pphwsnix5x/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Korabl_-iz-musora_-kotoryi-zhdiet-svoiegho-chasa-Oblozhka.jpg","gridUrl":"https://media.cgtrader.com/variants/50i07792260su1l1z6pphwsnix5x/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Korabl_-iz-musora_-kotoryi-zhdiet-svoiegho-chasa-Oblozhka.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/mechanical-parts/carp-fishing-boat-stl-model-m-fish-3d-printable","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[],"categorySlug":"hobby-diy","subcategorySlug":"mechanical-parts","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Mechanical parts","schemaImageUrl":"https://img-new.cgtrader.com/items/6205219/c736877b88/boat-bait-carp-fishing-3d-print-model-m-fish-3d-printable-3d-model-c736877b88.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6911493","type":"listingItem","attributes":{"id":6911493,"title":"Collectible Benchy style Santa Maria","price":0.0,"description":"3D model description\nThis creative design reimagines the classic 3D printing test boat as the historic Santa María, blending calibration functionality with exploration-era aesthetics. The model preserves the recognizable Benchy proportions while incorporating details inspired by the legendary ship of Christopher Columbus, creating a unique fusion of modern 3D printing culture and maritime history.\n\nPerfect as both a calibration test and a decorative piece, this STL allows makers to evaluate print quality while enjoying a distinctive historical design. The combination of familiar geometry and added ship details makes it ideal for showcasing printer performance.\n\nOptimized for both FDM and resin printing, the model features clean geometry and reliable print behavior while enhancing visual appeal.\n\nA classic test model inspired by the age of exploration.\n\n3D printing settings\n• Recommended layer height: 0.16–0.2 mm for general calibration\n• Use 2–3 perimeters to evaluate wall accuracy\n• 10–15% infill for standard testing\n• Print without supports for true benchmark results\n• Adjust cooling and speed to test performance\n• Ideal for comparing filaments and slicer settings\n• Resin printing enhances fine decorative details","imageAlt":null,"url":"https://www.cgtrader.com/free-3d-print-models/art/sculpture/collectible-benchy-style-santa-maria","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/lk0yy6eugn31zj6xt7xbt730v4pa/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Benchy%20Santa%20Maria%2001.jpg","gridUrl":"https://media.cgtrader.com/variants/lk0yy6eugn31zj6xt7xbt730v4pa/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Benchy%20Santa%20Maria%2001.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/art/sculpture/collectible-benchy-style-santa-maria","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"art","subcategorySlug":"sculpture","categoryTitle":"Art \u0026 Design","subcategoryTitle":"Sculptures","schemaImageUrl":"https://img-new.cgtrader.com/items/6911493/719bdae5df/collectible-benchy-style-santa-maria-3d-model-719bdae5df.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"3648219","type":"listingItem","attributes":{"id":3648219,"title":" 1 144 King George V Class Battleship","price":50.0,"description":"The Royal Navy’s HMS King George V was the lead ship of five King George V-class (KGV) battleships used during WWII. Her sister ships included the HMS Prince of Wales, HMS Duke of York, HMS Anson and HMS Howe. Her most notable action was the pursuit of Nazi Germany’s DKM Bismarck after it had sunk the HMS Hood and damaged the HMS Prince of Wales in the Battle of the Denmark Strait on May 24, 1941. \nThe most notable characteristics of the KGV Class battle ships were the quad/dual forward turrets housing 14 inch guns, thick torpedo belt armor, aircraft cranes/catapult located amidships and crowded auxiliary boat stowage on the roof of the rear superstructure.\n\nThis KGV model represents her 1941 appearance when it pursued DKM Bismarck.  Scale details include torpedo belts, rotating 14 and 5 inch gun turrets with elevating gun barrels, Supermarine Walrus scout biplane, aux boats, life rafts, aircraft cranes and 40mm anti aircraft guns. For RC operation, motor brackets for four 380 type Mabuchi brushed motors and a rudder servo mount are supplied.  \n\nHull access is via removable fore and rear superstructures, partial deck section and rudder access panels. \n\nShorter hull sections are provided for 3d printers with Z (height) less than 200mm.\n\nThis model can be built as the HMS King George V or HMS Prince of Wales as they appeared in 1941.\n\nThe model dimensions are: 1577.4 mm x 237.4 mm x 405.4 mm. \n\n \n","imageAlt":"3D printable model 1 144 King George V Class","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/1-144-king-george-v-class-battleship","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/xpqeS1i9VDtJx1w9xGaXvDbu/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/PXL_20221029_132201755.jpg","gridUrl":"https://media.cgtrader.com/variants/xpqeS1i9VDtJx1w9xGaXvDbu/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/PXL_20221029_132201755.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/1-144-king-george-v-class-battleship","isCgtVerified":true,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":129,"name":".3mf","is_native":false},{"id":100,"name":".pdf","is_native":false},{"id":14,"name":".skp","is_native":false},{"id":null,"name":null,"is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/3648219/c5932ebacc/1-144-king-george-v-class-battleship-3d-model-c5932ebacc.webp","saleOffDiscount":50,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"121368","type":"listingItem","attributes":{"id":121368,"title":"OpenRC  RC Truggy Rims","price":0.0,"description":"\u003cp\u003eUpdate 2013-04-06: Latest version (Rev A.9) uploaded.  \u003c/p\u003e\u003cp\u003eRims for 1:10 RC Truggy (or other similar car)  \u003c/p\u003e\u003cp\u003eThese rims are compatible with 320S Zombie Max tires: \u003ca href=\"http://losi.com/Products/Features.aspx?ProdId=LOSB7213\" rel=\"nofollow\"\u003ehttp://losi.com/Products/Features.aspx?ProdId=LOSB7213\u003c/a\u003e  \u003c/p\u003e\u003cp\u003eUpdate: Added files w support.\u003c/p\u003e","imageAlt":"OpenRC RC Truggy Rims 3D printable model truggy","url":"https://www.cgtrader.com/free-3d-print-models/games-toys/toy/openrc-rc-truggy-rims","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/bFLNkX1XWkniQ6qr4msT687t/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/openrc-rc-truggy-rims-3d-model-stl-stp.jpg","gridUrl":"https://media.cgtrader.com/variants/bFLNkX1XWkniQ6qr4msT687t/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/openrc-rc-truggy-rims-3d-model-stl-stp.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/games-toys/toy/openrc-rc-truggy-rims","isCgtVerified":true,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":72,"name":".stp","is_native":false}],"categorySlug":"games-toys","subcategorySlug":"toy","categoryTitle":"Games \u0026 Toys","subcategoryTitle":"Toys","schemaImageUrl":"https://img-new.cgtrader.com/items/121368/e96bc365c7/openrc-rc-truggy-rims-3d-model-e96bc365c7.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6373265","type":"listingItem","attributes":{"id":6373265,"title":"Uss Fletcher dd 445 battleship for RC","price":25.0,"description":"this is the uss Fletcher DD 445 ww2 battleship RC for 3d print\n\nthe model is separated into a part\n\nshaft hole diameter is 9 mm, you can use 8 mm diameter propeller shaft\nyou need bolt M2.5 /2 mm\nshaft recomendation is 8 mm width and 15 cm length, bolt m 2.5 mm\n\nship dimension : length : 100 cm widht : 10 cm\n\ni designed it to suitable for fdm printer but there are some part that need little attention because of the detail\n\nthere is no error in cura or pruca slicer\n\nincluded image of model part and position\n\nready to print","imageAlt":"Uss Fletcher dd 445 battleship for RC 3D print model","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/uss-fletcher-dd-445-battleship-for-rc","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/692e1ne8n97m9us797l509yvc2wu/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/1.jpg","gridUrl":"https://media.cgtrader.com/variants/692e1ne8n97m9us797l509yvc2wu/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/1.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/uss-fletcher-dd-445-battleship-for-rc","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":215,"name":".png","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6373265/06a07526a1/uss-fletcher-dd-445-battleship-for-rc-3d-model-06a07526a1.webp","saleOffDiscount":0,"eligibleForSubscription":true,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":"premium"}},{"id":"121361","type":"listingItem","attributes":{"id":121361,"title":"GoPro Mount for OpenRC Truggy RC Car","price":0.0,"description":"\u003cp\u003eSimple GoPro Mount for OpenRC Truggy. \u003c/p\u003e","imageAlt":"GoPro Mount for OpenRC Truggy RC Car 3D printable model","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/mechanical-parts/gopro-mount-for-openrc-truggy-rc-car","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/i1Ug5hYWhuGvKNVAwn6zMiDf/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/gopro-mount-for-openrc-truggy-rc-car-3d-model-stl.jpg","gridUrl":"https://media.cgtrader.com/variants/i1Ug5hYWhuGvKNVAwn6zMiDf/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/gopro-mount-for-openrc-truggy-rc-car-3d-model-stl.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/mechanical-parts/gopro-mount-for-openrc-truggy-rc-car","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"mechanical-parts","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Mechanical parts","schemaImageUrl":"https://img-new.cgtrader.com/items/121361/df425d2e0c/gopro-mount-for-openrc-truggy-rc-car-3d-model-df425d2e0c.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6430693","type":"listingItem","attributes":{"id":6430693,"title":"North Carr Light Ship 1 48th scale","price":40.0,"description":"The North Carr lightship is the last remaining Scottish lightship.  Built in 1933 she served off the coast of Fife in Scotland until 1975, then was a museum ship for many years.  Now she is derelict and in the process of being de-constructed in Dundee.\n\nThe original was built in Glasgow in 1932 at the Pointhouse Shipyard.  She was an unpowered ship designed to be towed out and anchored in place off Fife Ness to warn of the North Carr rocks which were a danger to shipping.\n\nIn December 1959 she was the subject of a tragic rescue mission.  In a fierce storm the lightship broke her moorings and began to drift towards the shore  with her crew.  They put out a MayDay call which was responded to by the Broughty Ferry Lifeboat Mona.  Unfortunately the lifeboat capsized during the rescue and its crew of eight were all lost.  The lightship survived and was towed out to her moorings again with her crew safe.\n\nThe model is an accurate 1/48th scale model of the lightship, that floats on the water or can be used as a static model.  The original ship is about to be lost  for ever  as she is about to be scrapped.  The model is a small way of preserving the ship for posterity.\n\nAs indicated the model has no motor or propulsion, just like the original ship, but is designed to float as a working model.  She can be fitted with a flashing light in the light tower - the access holes have been left for wiring.\n\nThe model at 1/48th scale is 700mm long, 160mm wide and stands to a height of 370mm tall.  She is designed to be printed on a build plate of 200mm square.  She can of course be printed either larger or smaller.  \n\nThere is a detailed illustrated instruction booklet included giving a step by step set of instructions on how to put the model together.  Link to a free copy of the instructions is here https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/north-carr-lightship-instruction-booklet\n\nAs with all my models I am very happy to respond to email requests for help if necessary while printing","imageAlt":"North Carr Light Ship 1 48th scale 3D printable model","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/north-carr-light-ship-1-48th-scale","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/7oeqhoghainm5bjmhlzyq5tu7ag1/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/20250909_130414.jpg","gridUrl":"https://media.cgtrader.com/variants/7oeqhoghainm5bjmhlzyq5tu7ag1/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/20250909_130414.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/north-carr-light-ship-1-48th-scale","isCgtVerified":true,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":null,"name":null,"is_native":false},{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6430693/21a872f82c/north-carr-light-ship-1-48th-scale-3d-model-21a872f82c.webp","saleOffDiscount":50,"eligibleForSubscription":true,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":"premium"}},{"id":"1979162","type":"listingItem","attributes":{"id":1979162,"title":"Soviet MTB-2 Flying Boat","price":0.0,"description":"1/900th scale MTB-2 flying boat model. Certain elements not to scale.\n\nThe MTB-2 was a prototype flying boat designed for the Soviets shortly before WWII. The production was interrupted by the onset of the war and the two prototypes were pressed into service.\n\nThis model is designed and tested at 1/900th scale, but up-scaling and down-scaling are possible. Since the model is optimized for 1/900th scale, it is not ideal to print larger versions due to a lack of detail. The model has been enlarged along the z axis to allow for better printing and accentuation of detail. The model has also been given thicker elements for strength. The wingspan and overall length are to scale.\n\nYou can find the stand at https://www.cgtrader.com/free-3d-print-models/miniatures/vehicles/stand-for-miniature-aircraft.\n\nThis is part of my collection of WWII aircaft, keep an eye out for more to come. If you have a specific request, message me and I'll bump it up my list.\n\nUpdate 03 Oct 19: Added option with propellors.\n\nTested with PLA at .08mm layer height with .4mm nozzle.","imageAlt":"Soviet MTB-2 Flying Boat","url":"https://www.cgtrader.com/free-3d-print-models/miniatures/vehicles/soviet-mtb-2-flying-boat","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/8Ezvm8rxoV7BYUL1iDQC4H4g/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/mtb0.jpg","gridUrl":"https://media.cgtrader.com/variants/8Ezvm8rxoV7BYUL1iDQC4H4g/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/mtb0.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/miniatures/vehicles/soviet-mtb-2-flying-boat","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":12,"name":".obj","is_native":false},{"id":51,"name":".stl","is_native":false}],"categorySlug":"miniatures","subcategorySlug":"vehicles","categoryTitle":"Miniatures","subcategoryTitle":"Cars \u0026 Vehicles","schemaImageUrl":"https://img-new.cgtrader.com/items/1979162/cba91d6a48/soviet-mtb-2-flying-boat-3d-model-cba91d6a48.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6255137","type":"listingItem","attributes":{"id":6255137,"title":"Pibby River Patrol Boat","price":20.0,"description":"Every 3D printer knows about \"Benchy.\" But have you ever heard of his Vietnam-veteran uncle? Based on the US Navy PBRs from the era, I have created \"Pibby\" based on that idea mixed with Benchy's general shape. I hope you enjoy it!\n\nI designed this model around the LK 2016 RC Boat Turbo Jet motor I bought off of eBay. (I saw they're on Amazon too.)  I have included a secondary Hull part 3 that does NOT have the cutouts for this motor if you decide to scale it down and/or use different running gear.​\n\nFor a quick preview and to check printer size compatibility, the following are the largest dimensions from all of the pieces: Biggest Length: 309mm, Biggest Width: 244mm, Biggest Height: 145mm. Fully constructed, the model is overall 634mm long, 244mm wide, and 246mm tall.  I don't necessarily have a scale for it, as it's not based off any real plans or measurements.  More pics to follow as I complete construction!\n\nEdit 1: I've incuded a \"Shortened Pieces\" folder that cut the aft hull piece in half, making the Biggest Length 232mm for the first hull piece rather than the 309mm for the aft hull piece, to hopefully fit more printers. Now there are 4 hull parts, with the 4th being listed with \"a\" and \"b\" options for with/without engine hole cuts (respectively.)","imageAlt":"Pibby River Patrol Boat 3D printable model","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/pibby-river-patrol-boat","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/cyfm6pb6gxuinpe00oqdsm6mugg5/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Screenshot%202025-06-30%20145506.jpg","gridUrl":"https://media.cgtrader.com/variants/cyfm6pb6gxuinpe00oqdsm6mugg5/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Screenshot%202025-06-30%20145506.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/pibby-river-patrol-boat","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":100,"name":".pdf","is_native":false},{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6255137/cba078bb05/pibby-river-patrol-boat-3d-model-cba078bb05.jpg","saleOffDiscount":0,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"premium"}},{"id":"4552028","type":"listingItem","attributes":{"id":4552028,"title":"Stylized Boat 3d print","price":0.0,"description":"Stylized Boat 3d print model\n-Ready to print\n","imageAlt":"Stylized Boat 3d print miniatures","url":"https://www.cgtrader.com/free-3d-print-models/miniatures/vehicles/stylized-boat-3d-print","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/cawyQuU7qVNDqRH2ztgipxkQ/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Boat.jpg","gridUrl":"https://media.cgtrader.com/variants/cawyQuU7qVNDqRH2ztgipxkQ/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Boat.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/miniatures/vehicles/stylized-boat-3d-print","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"miniatures","subcategorySlug":"vehicles","categoryTitle":"Miniatures","subcategoryTitle":"Cars \u0026 Vehicles","schemaImageUrl":"https://img-new.cgtrader.com/items/4552028/3dc3736c04/stylized-boat-3d-print-3d-model-3dc3736c04.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"5297399","type":"listingItem","attributes":{"id":5297399,"title":" Tintin   Sirius ","price":30.0,"description":"        丁丁历险记 天狼星号拖网渔船。模型参考多本漫画设计，长约90cm， 建议使用550电机和995舵机。轴套直径8mm。照片展示的是我制作的成品，请注意其中的桅杆是用abs管子自制的，栏杆是用铜丝自制的，这些零件打印效果不太好，所以没有提供打印文件。个别细小零件建议树脂打印。甲板可自己贴木皮。包含的零件请以分件图为准，船体分为4段，上层建筑分为2段。祝您玩的愉快！第二个版本，分件都在23.5cm以内。\n                The Adventures of Tintin, the trawler Sirius Star. The model refers to the design of several comics, is about 90cm long, and it is recommended to use 550 motors and 995 steering gear. Shaft sleeve diameter 8mm. The photos show the finished products I made. Please note that the masts and railings are made by abs pipe and copper wire. The printing effect of these parts is not good, so no printing documents are provided. Resin printing is recommended for individual small parts. The deck can be veneered by itself. Please refer to the section drawing for the included parts. The hull is divided into 4 sections and the superstructure into 2 sections，3D Printers need 25 cm space. Have a good time!","imageAlt":"Tintin Sirius 3D printable model","url":"https://www.cgtrader.com/3d-print-models/miniatures/vehicles/tintin-sirius","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/mAgXjhskTYUeqXswbBrrsSwX/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/%E5%BE%AE%E4%BF%A1%E5%9B%BE%E7%89%87_202405221207363.jpg","gridUrl":"https://media.cgtrader.com/variants/mAgXjhskTYUeqXswbBrrsSwX/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/%E5%BE%AE%E4%BF%A1%E5%9B%BE%E7%89%87_202405221207363.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/miniatures/vehicles/tintin-sirius","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"miniatures","subcategorySlug":"vehicles","categoryTitle":"Miniatures","subcategoryTitle":"Cars \u0026 Vehicles","schemaImageUrl":"https://img-new.cgtrader.com/items/5297399/1ec6e3ac00/tintin-sirius-3d-model-1ec6e3ac00.webp","saleOffDiscount":70,"eligibleForSubscription":true,"subscriptionSubscribed":false,"subscriptionPotential":true,"subscriptionTierBand":"premium"}},{"id":"3023616","type":"listingItem","attributes":{"id":3023616,"title":"V8 RC 1 8th scale model engine block with super charger ","price":0.0,"description":"This is my first major design-build, so be kind would love some comments.\nI took the inspiration from many different designs I have seen all over the web.\n\nThe pullies are all GT2 toothed pullies with 5mm bore.\nthe belts are standard belts (size to be added once I measure)\n\nAll screws are 0.8mm diameter thread (more details to follow)\n\nThe drive space is a 3v gearbox motor dc motor that mounts into the supercharger, this can be linked to your RC control to make the pullies move.\nthere is also mounts and space in teh intake for a micro server to be mounted to opperate the flaps\n\nAll bearings are 10mm diameter with a 5mm bore,\n4 plain bearings that go into the back of the block\n1 plain bearing in the supercharger face\n4 flanged bearings that go into the front face\n\nPrint Settings\nFilament - PLA\nExtruder @ 195 deg c\nBuild plate @ 50 deg c\nLayer height @ 0.095 mm\nInfill @ 20%\nExturder was a 0.2mm diameter\n\nTHis was a old commission and I have been paid hansomly for so i share it now for free.... ENJOY\n","imageAlt":"V8 RC 1 8th scale model engine block with super","url":"https://www.cgtrader.com/free-3d-print-models/games-toys/other/v8-rc-1-8th-scale-model-engine-block-with-super-charger","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/q8H53yK7Jtm9r77dDdWJ2LFD/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/V8%20on%20car.jpg","gridUrl":"https://media.cgtrader.com/variants/q8H53yK7Jtm9r77dDdWJ2LFD/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/V8%20on%20car.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/games-toys/other/v8-rc-1-8th-scale-model-engine-block-with-super-charger","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"games-toys","subcategorySlug":"other","categoryTitle":"Games \u0026 Toys","subcategoryTitle":"Other","schemaImageUrl":"https://img-new.cgtrader.com/items/3023616/1cced7924d/v8-rc-1-8th-scale-model-engine-block-with-super-charger-3d-model-1cced7924d.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6872378","type":"listingItem","attributes":{"id":6872378,"title":"HMS Amazon Type 21 Frigate  radio controlled model","price":70.0,"description":"These stl files will enable you to build a fully working model of a Type 21 Frigate, HMS Amazon Class as used by the British Royal Navy, and subsequently the Pakistan Navy.  They were a good looking fast ship and at 1/72nd scale makes a working model that performs well on the water.\n\nThe Type 21 frigates were the first totally gas turbined frigates of the Royal Navy, built through the 1970's and used until the 1990's before being sold to the Pakistan Navy and used by them until very recently.\n\nThe ships could do a burst of speed of 37 knots though their ordinary cruising speed was a speedy 18.\n\nThey fought with distinction in the Falklands War.  Two of the class were lost to enemy action.\n\nThe model can make any of the class, with the weaponry and fittings used throughout its service in the Royal Navy. \n\nThe illustrated instruction booklet will show you what is involved in building the model as well as giving details of the extra mechanical parts required to make the working model.  Though some fittings are moulded into the prints much has to be constructed from the detailed stl files provided.  It is a complex kit of some 200  parts which when complete makes an attractive and exciting model for display or sailing.\n\nThe parts are designed for a filament printer with a 220mm cubed bed.  I used a Creality K1 Max printer to print all parts, though some parts might show better detail using a resin printer.\n\nThe whole model has been successfully printed at 1/72nd scale but is designed so that it can be printed at up to half that size.  However it has not yet been tested at smaller scales and a working model may be more difficulty too much smaller.\n\nAs always with my models I am very ready to respond to any queries about construction and am ready to design components for different size tubing for rudders and shafts. etc.\n\nHere is a link to the free building instructions so that you can see what is involved before you purchase  https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/hms-amazon-type-21-build-instructions-for-3d-printed-frigate","imageAlt":"HMS Amazon Type 21 Frigate radio controlled model","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/hms-amazon-type-21-frigate-radio-controlled-model","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/5b0oy0zjogtzjmx7f0yrn44rdl95/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/20260301_112739.jpg","gridUrl":"https://media.cgtrader.com/variants/5b0oy0zjogtzjmx7f0yrn44rdl95/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/20260301_112739.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/hms-amazon-type-21-frigate-radio-controlled-model","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6872378/8fdb8943b6/hms-amazon-type-21-frigate-radio-controlled-model-3d-model-8fdb8943b6.webp","saleOffDiscount":50,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"5638761","type":"listingItem","attributes":{"id":5638761,"title":"SCX10 iii Gladiator Flatbed","price":0.0,"description":"Want an overland style SCX10 iii Gladiator? You can now build one! The flat bed originally designed and printed for our SCX10 iii Gladiator Aussie Style Overland build, which can be found here: https://www.aheadrc.com/gladiator-overland-custom-build\n\nThe flatbed comes with 2 different versions of an oversized, extra beefy chassis mount, one used for our build, and the other which is slidable for fine tune fore-aft adjustments.\n\nAlso included are 2 different styles of headache racks, a narrow one and a wide one. We used the narrow one in our build.\n\n \n\nTo complete the flatbed, the following hardware are needed:\n\n5x M3*20mm countersunk screws for the headache rack\n4x M3*15mm countersunk screws for the chassis mount plate\n4x M3 nylock nuts for the chassis mount plate\n7x M3*10mm countersunk screws for the rear bumper and fenders\n6x M3*10mm socket head screws for the railings\n4x M3 washers for the flatbed's adjustable chassis mount\n4x M3*15 or 20mm socket head screws for mounting the flatbed to the chassis' rear brace\n \n\nPlease note that the accessories shown in the pictures are NOT included, they are available separately in our store.\n\n \n\nPlease do not hesitate to contact us if you need any help!\n\n\nPLA+\n\n0.6mm nozzle\n0.3-0.4mm layer heights\n50% infill","imageAlt":"SCX10 iii Gladiator Flatbed 3D printable model","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/scx10-iii-gladiator-flatbed","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/4eRk5iQcyv4pGBAqXuU7xuFF/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/ahead%20RC%20SCX10%20Gladiator%20Flatbed%20%282%29.jpg","gridUrl":"https://media.cgtrader.com/variants/4eRk5iQcyv4pGBAqXuU7xuFF/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/ahead%20RC%20SCX10%20Gladiator%20Flatbed%20%282%29.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/scx10-iii-gladiator-flatbed","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"automotive","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Automotive \u0026 Car parts","schemaImageUrl":"https://img-new.cgtrader.com/items/5638761/2fae0bd0ee/scx10-iii-gladiator-flatbed-3d-model-2fae0bd0ee.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"7198781","type":"listingItem","attributes":{"id":7198781,"title":"boarder control boat full scale","price":25.0,"description":"Boarder control RC boat  full scale\n\nHuge dimensions 800mm x 250mm approx height and width","imageAlt":"boarder control boat full scale","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/boarder-control-boat-full-scale","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/u49zpiuqd8xq9nu91tqd8v64yp9n/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/Gemini_Generated_Image_d0hsxd0hsxd0hsxd.jpg","gridUrl":"https://media.cgtrader.com/variants/u49zpiuqd8xq9nu91tqd8v64yp9n/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/Gemini_Generated_Image_d0hsxd0hsxd0hsxd.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/boarder-control-boat-full-scale","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":129,"name":".3mf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/7198781/bb9418d018/boarder-control-boat-full-scale-3d-model-bb9418d018.webp","saleOffDiscount":70,"eligibleForSubscription":true,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":"premium"}},{"id":"5130975","type":"listingItem","attributes":{"id":5130975,"title":"Siege pilote avion","price":0.0,"description":"Pour usage personnel et non commercial. Ce modèle ou des parties de celui-ci NE PEUVENT PAS être vendu, partagés ou distribués sous forme numérique, physique, originale ou modifiée.\n\nMaquette imprimable en 3D\n\nunités de fichier: mm (millimètres)\n\nformat de fichier : STL\n\nhauteur(Z): 75.56 mm\n\nlargeur(X): 31.19 mm\n\nprofondeur (Y) : 62.62 mm","imageAlt":"Siege pilote avion 3D print model","url":"https://www.cgtrader.com/free-3d-print-models/miniatures/vehicles/siege-pilote-avion","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/JxkVM3SDSzo2eCucHJVQQPDr/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/01.jpg","gridUrl":"https://media.cgtrader.com/variants/JxkVM3SDSzo2eCucHJVQQPDr/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/01.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/miniatures/vehicles/siege-pilote-avion","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"miniatures","subcategorySlug":"vehicles","categoryTitle":"Miniatures","subcategoryTitle":"Cars \u0026 Vehicles","schemaImageUrl":"https://img-new.cgtrader.com/items/5130975/adb5791ccd/siege-pilote-avion-3d-model-adb5791ccd.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"5999782","type":"listingItem","attributes":{"id":5999782,"title":"HMS Amethyst  Black Swan Sloop radio controlled working model","price":60.0,"description":"HMS Amethyst was a Black Swan Sloop built in WW2 but made famous by the Yangtse Incident in 1949 when she was fired upon on her journey up the Yangtse River to Nanking and subsequently grounded on a sand bank for some six weeks until she made her get away.\n\nThis model is based on the plans available in Les Brown's book the Black Swan Class Sloops and incorporates the modifications made to the ship before its service in the Far East.  \n\nThe model is scaled to 1/48th scale making a model about 1600mm long and 205mm wide.  If printed at 66% it would be scaled at 1/72nd scale and be about 1100mm long.  However a model at this scale might need a little modification to the access hatches for motors and batteries.\n\nI have included a full instruction booklet with illustrations that is over 40 pages long, but if you  find issues or problems I'm very happy to answer emails.  There is a link to the instruction manual for free download at the end of this description.\n\nThe pictures show the model on the water.  She sails very well indeed, a very stable model ballasted with batteries and about 3kg of lead sheeting and is quite capable in windy and pond rough conditions.  She is twin screwed and has a good turning circle of about 3x her own length, but this would be greatly improved if twin speed controllers were used.\n\nI have printed her in PETG filament and she uses about 4 reels.  Some fittings were printed using a resin printer - the gun director, the Oerlikon guns on the bridge wings and the Bofors guns, but all these could with care be printed with a good filamenbt printer too.\n\nThe printer used was a Creality K1 Max which has a maximum build plate of 300mm cubed.  The maximum size of parts in the print  is 220mm cubed except for the lattice mast, but I have included a two part mast as well for those with a smaller printer.  I have been requested hull sections for  printing with a smaller printer and I have now included these  so that everything can be printed witha printer with an build area of 200mm cubed.\n\nShe has been a fun project to design, and a great model to sail.  I hope you enjoy building her!\n\nIf you wish to look at the building instructions, here is a link to a free download so you can see what is involved  https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/hms-amethyst-black-swan-sloop-radio-controlled-instructions","imageAlt":"HMS Amethyst Black Swan Sloop radio controlled working 1","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/hms-amethyst-black-swan-sloop-radio-controlled-working-model","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/mo1c9krqazid1y2wd3gwwtfhjoom/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/20250325_171412.jpg","gridUrl":"https://media.cgtrader.com/variants/mo1c9krqazid1y2wd3gwwtfhjoom/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/20250325_171412.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/hms-amethyst-black-swan-sloop-radio-controlled-working-model","isCgtVerified":true,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":100,"name":".pdf","is_native":false},{"id":222,"name":".mp4","is_native":false},{"id":null,"name":null,"is_native":false},{"id":129,"name":".3mf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/5999782/c2ddf41e7f/hms-amethyst-black-swan-sloop-radio-controlled-working-model-3d-model-c2ddf41e7f.webp","saleOffDiscount":50,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"4018646","type":"listingItem","attributes":{"id":4018646,"title":"Assembly Manual - DIANA-3 RC Scale Sailplane","price":0.0,"description":"Before trying to build this airplane, you'll want to know how to build it and what you'll need first.\n\nThe shape of each part and the assembly method and sequence are indicated in the assembly manual.\n\nYou can also check photos and print conditions for assembly reference.\n\nIn order to reach this kind of result and feel a sense of accomplishment, good skill of 3d printed parts assembly, printer operation ability, and an understanding of R/C are required.\n\nFirst of all, it requires meticulous patience.\n\nContact\ne-mail : rah66@hanmail.net\n\nfacebook : https://www.facebook.com/profile.php?id=100078820971516\n\nYoutube : https://www.youtube.com/channel/UCGGvpPkwdtyBjYLQHSdkeDg\n\n3D PRINTING SETTINGS\nDetailed information is included in the manual file.\n\nPrint the test part with reference to the parameters presented. The actual wall thickness that should be printed is\n\nLW-PLA / VASE MODE(Spiralize outer contour)\nBottom layer : 2 / Top Layer : 0\nWing14_L - 1 Wall Thickness 0.5~0.55mm","imageAlt":"Assembly Manual - DIANA-3 RC Scale 3D printable model","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/manual-diana-3-rc-scale-sailplane","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/1EvUJzJaRN4rHoYEhTVturaV/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/s20220906_160809.jpg","gridUrl":"https://media.cgtrader.com/variants/1EvUJzJaRN4rHoYEhTVturaV/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/s20220906_160809.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/manual-diana-3-rc-scale-sailplane","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false},{"id":100,"name":".pdf","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/4018646/7f78325631/assembly-manual-diana-3-rc-scale-sailplane-3d-model-7f78325631.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"6170595","type":"listingItem","attributes":{"id":6170595,"title":"HMS Ton Class Minesweeper radio controlled model","price":60.0,"description":"The Ton Class Minesweeper was a class of 118 small wooden warships built in the 1950s for minesweeping duties, the last wooden warships of the Royal Navy!  \n\nThe model is based on the general concept of the Ton Class, rather than on any one particular ship.  It has the closed bridge that almost every one of the class was converted to, but it has a lattice mast rather than a pole mast, it carries a RIB rather than a wooden dinghy, life rafts rather than Carley floats.  However it has the engine room ventilator grills of the earlier ships in the class.  I have painted the decks green - I painted a lot of decks green in my time, but you may want to overlay the deck with thin wood to replicate teak decks.\n\nI used the original shipyard plans for the hull lines and layout, and the excellent photos and descriptions contained in the book \"Last of the Wooden Walls\" ed by Rob Hoole for the Ton Class Association, whose website is another  excellent source of information on the class.\n\nThe model is intended to celebrate the class of ship rather than to be an accurate representation of one ship.  There were in any case so many variations.\n\nThe model is scaled to 1/48th scale  making a model about 980mm long and 200mm wide.  This is a nice size of model and it sails beautifully under radio control, its twin rudders giving extremely responsive steering.  With one ESC speed control controlling the twin motors and propellors she turns pretty much on her own length.  Ballasted with a large 12v 7ah battery she will run for several hours and cope with windy and rough conditions on the local boating pond and is great fun to sail.\n\nThe model however could be scaled to different sizes from 1/72nd 00 model railway scale - set the print at 66%, 1/64th scale (75%), or 1/32nd scale  150%, or anything in between that takes your fancy.  Instructions though and sizes of motors and prop shafts are only given for the 1/48th scale model.  The hull access however is quite good for any of these scales.\n\nI have included an instruction booklet with illustrations that is 25 pages long that should give step by step instructions  to building, but if you find any issues or problems then don't hesitate to contact me through the cgtrader messaging service and I will deal with them as soon as possible.\n\nThe printer I used was a Creality K1 Max with a maximum build plate of 300mm cubed.  However I think there is no part of the 1/48th model which is larger than 200mm cubed - however if you have issues I am quite happy to provide cut up files to fit a smaller printer - just let me know.\n\nI have always loved the Ton Class and this has been a fiun project to design and build and is an enjoyable model to sail.  I hope you enjoy building her!\nIf you wish to look at the building instructions before purchase here is a link to a free download of them so that you can see what is involved....  https://www.cgtrader.com/free-3d-print-models/hobby-diy/robotics/1-48-ton-class-minesweeper-building-instructions\n","imageAlt":"HMS Ton Class Minesweeper radio controlled model","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/ton-class-minesweeper-radio-controlled-model","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/fhb87ermmfc2e50bruftxcgc0pkz/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/20250527_172240.jpg","gridUrl":"https://media.cgtrader.com/variants/fhb87ermmfc2e50bruftxcgc0pkz/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/20250527_172240.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/robotics/ton-class-minesweeper-radio-controlled-model","isCgtVerified":true,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":222,"name":".mp4","is_native":false},{"id":51,"name":".stl","is_native":false},{"id":100,"name":".pdf","is_native":false},{"id":null,"name":null,"is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"robotics","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"RC \u0026 Robotics","schemaImageUrl":"https://img-new.cgtrader.com/items/6170595/ecdf23b0c5/hms-ton-class-minesweeper-radio-controlled-model-3d-model-ecdf23b0c5.webp","saleOffDiscount":50,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"7117476","type":"listingItem","attributes":{"id":7117476,"title":"German Type VII-C Submarine","price":0.0,"description":"1/1800th scale Type VII-C submarine model. Certain elements not to scale.\n\nThe Type VII-C submarines consisted of 568 boats built for the Kriegsmarine. They were the most numerous U-boat design built . They carried fourteen torpedoes which could be deployed through four torpedo tubes at the front and one at the rear. They also carried one four-inch naval gun until 1943.\n\nThis is part of my collection of WWII warships, keep an eye out for more to come. If you have a specific request, message me and I'll bump it up my list.\n\nTested with PLA at .08mm layer height with .4mm nozzle.","imageAlt":"German Type VII-C Submarine","url":"https://www.cgtrader.com/free-3d-print-models/miniatures/vehicles/german-type-vii-c-submarine","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/7lgc0ndm3tudmytorjqyebadnm97/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/TypeVIIC.jpg","gridUrl":"https://media.cgtrader.com/variants/7lgc0ndm3tudmytorjqyebadnm97/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/TypeVIIC.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/miniatures/vehicles/german-type-vii-c-submarine","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":12,"name":".obj","is_native":false},{"id":189,"name":".ply","is_native":false},{"id":51,"name":".stl","is_native":false}],"categorySlug":"miniatures","subcategorySlug":"vehicles","categoryTitle":"Miniatures","subcategoryTitle":"Cars \u0026 Vehicles","schemaImageUrl":"https://img-new.cgtrader.com/items/7117476/08cc850f1a/german-type-vii-c-submarine-3d-model-08cc850f1a.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"4520963","type":"listingItem","attributes":{"id":4520963,"title":"RC Vehicles - Mahogany  Runabouts  Tugboat  Airboat Karmann Ghia","price":85.0,"description":"This is a collection of my favorite scale RC models. Every model has been built and tested. All models come with detailed step by step photo illustarted instructions as well as a tools and materials list.  These models include a significant amolunt of details and are show-stoppers at the local park.","imageAlt":"3D RC Vehicles - Mahogany Runabouts Tugboat Airboat 1","url":"https://www.cgtrader.com/3d-model-packs/rc-vehicles","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/LTNnLVxyzDfSVMGXw6vR1siQ/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/rc-vehicles-mahogany-runabouts-tugboat-airboat-karmann-ghia-3d-model-5bb267eb36.jpg","gridUrl":"https://media.cgtrader.com/variants/LTNnLVxyzDfSVMGXw6vR1siQ/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/rc-vehicles-mahogany-runabouts-tugboat-airboat-karmann-ghia-3d-model-5bb267eb36.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-model-packs/rc-vehicles","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/4520963/5bb267eb36/rc-vehicles-mahogany-runabouts-tugboat-airboat-karmann-ghia-3d-model-5bb267eb36.webp","saleOffDiscount":50,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"5960269","type":"listingItem","attributes":{"id":5960269,"title":"Free Engine and Mirror for Chevy G10 Van  3D printable STL model","price":0.0,"description":"For RC and Diecast enthusiast.\nLarge scales can use FDM or Resin printing. Small scale - resin.\nThe model is combined, all the main parts are presented as separate parts, so they are easily modified or removed. \t\nThe *.stl files are in the *.zip archive. \t\n\nSpecs: •1:10 •1:12 •1:14 •1:24 •1:25 \n\n3D printable STL of an Engine and Mirror for the classic Chevy G10 Van! Perfect for scale model enthusiasts, RC builders, and diecast collectors looking to upgrade their van models. This free STL file is optimized for FDM and resin 3D printing, ensuring high-quality results.\nDownload now and bring your Chevy G10 Van model to life!\n\n**Attention:\n-For experienced model builder\n-Parts could need some adjustments with files or sand paper\n-Take care when you remove the supports\n-Parts should be glued.\n-Not recommended for kids\n-Be careful with the alignment of pieces when gluing.\n-Could need some sanding/ adjustments/ cuts / scratch built parts to fit your chassis / model kit / Wheels\n-Check dimmensions of your model before printing","imageAlt":"Free Engine and Mirror for Chevy G10 Van 3D printable STL","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/free-engine-and-mirror-for-chevy-g10-van-3d-printable-stl-model","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/a04xt5hqxbywpbzc4s1o0k4zbahz/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/0_1.jpg","gridUrl":"https://media.cgtrader.com/variants/a04xt5hqxbywpbzc4s1o0k4zbahz/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/0_1.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/free-engine-and-mirror-for-chevy-g10-van-3d-printable-stl-model","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"automotive","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Automotive \u0026 Car parts","schemaImageUrl":"https://img-new.cgtrader.com/items/5960269/65942752cc/free-engine-and-mirror-for-chevy-g10-van-3d-printable-stl-model-3d-model-65942752cc.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}},{"id":"5688224","type":"listingItem","attributes":{"id":5688224,"title":"3D Print your Own BLUEBIRD OF CHELSEA Yacht","price":19.99,"description":"Create your own radio-controlled replica of the famed Bluebird of Chelsea sailing yacht originally commissioned in 1938 by racecar driver, Sir Malcolm Campbell, for use in exploring the Cocos Islands in search of pirate treasure! Included in the purchase of these plans are (69) STL files and a 25-page photo illustrated instruction book. Also included are 1:1 plans and printable color images to be used for flags, a rug, and seat cushions. The level of detail is sure to astound any onlookers at your local pond.","imageAlt":"3D Print your Own BLUEBIRD OF CHELSEA Yacht","url":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/3d-print-your-own-bluebird-of-chelsea-yacht","isCLDApplicable":false,"isSaleOffApplicable":true,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/26UuAdfnoxp1rzedH2HTb9KJ/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/IMG_1739.jpg","gridUrl":"https://media.cgtrader.com/variants/26UuAdfnoxp1rzedH2HTb9KJ/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/IMG_1739.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/3d-print-your-own-bluebird-of-chelsea-yacht","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":100,"name":".pdf","is_native":false},{"id":51,"name":".stl","is_native":false},{"id":null,"name":null,"is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"hobby-accessories","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Hobby Accessories","schemaImageUrl":"https://img-new.cgtrader.com/items/5688224/8857b75b6d/3d-print-your-own-bluebird-of-chelsea-yacht-3d-model-8857b75b6d.webp","saleOffDiscount":30,"eligibleForSubscription":true,"subscriptionSubscribed":true,"subscriptionPotential":false,"subscriptionTierBand":"premium"}},{"id":"5176358","type":"listingItem","attributes":{"id":5176358,"title":"V8 Engine download Free 3D model KIT for old pickup truck","price":0.0,"description":"For RC and Diecast enthusiast.\nThe model is combined, all the main parts are presented as separate parts, so they are easily modified or removed. \t\nThe *.stl files are in the *.zip archive. \t\nLarge scales can use FDM or Resin printing. Small scale - resin.\t\n\nSpecs: •1:10 •1:12 •1:14 •1:16 •1:20 •1:24 •1:25\n\n*The 3D model may differ from the original in the dimensions and appearance of some parts, since information about the dimensions and appearance is taken from open sources. \nAnd often the information is different in different sources. \nThe author reserves the right to take what dimensions as the basis for creating a 3D model.\n\n**Attention:\n-For experienced model builder\n-Parts could need some adjustments with files or sand paper\n-Take care when you remove the supports\n-Parts should be glued.\n-Not recommended for kids\n-Be careful with the alignment of pieces when gluing.\n-Could need some sanding/ adjustments/ cuts / scratch built parts to fit your chassis / model kit / Wheels\n-Check dimmensions of your model before printing\n","imageAlt":"V8 Engine download Free 3D model KIT for old pickup truck","url":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/v8-engine-download-free-3d-model-kit-for-old-pickup-truck","isCLDApplicable":false,"isSaleOffApplicable":false,"gaAttributes":{},"primaryImage":{"gridFallbackUrl":"https://media.cgtrader.com/variants/CAh1XRnvDYjojkpky1Phzri9/a26e47dab5f2d22c43d6c5ce4b4b46ecc30c70918878397cba1a10c1e35d7bfc/engine%20KIT.jpg","gridUrl":"https://media.cgtrader.com/variants/CAh1XRnvDYjojkpky1Phzri9/78add9c2f02fbd73a43ffb3970be38683c5f15eff6ca849dc78c644f4ff9ce1b/engine%20KIT.webp","isAdultContent":false},"modelInfo":{"modelUrl":"https://www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/v8-engine-download-free-3d-model-kit-for-old-pickup-truck","isCgtVerified":false,"types":{"printReady":true,"animated":false,"pbr":false,"rigged":false,"lowPoly":false}},"metaverseFormatsList":[{"id":51,"name":".stl","is_native":false}],"categorySlug":"hobby-diy","subcategorySlug":"automotive","categoryTitle":"Hobby \u0026 DIY","subcategoryTitle":"Automotive \u0026 Car parts","schemaImageUrl":"https://img-new.cgtrader.com/items/5176358/8ec31caa88/v8-engine-download-free-3d-model-kit-for-old-pickup-truck-3d-model-8ec31caa88.webp","saleOffDiscount":0,"eligibleForSubscription":false,"subscriptionSubscribed":false,"subscriptionPotential":false,"subscriptionTierBand":null}}],"meta":{"totalCount":6370,"currentPage":1,"totalPages":54,"perPage":120},"extractingCoreStyles":false,"priceFilter":null,"licenseFilter":null,"sortByValue":"best_match","sortByOptions":[{"value":"best_match","label":"Best Match"},{"value":"sales","label":"Top Selling"},{"value":"newest","label":"Newest"},{"value":"oldest","label":"Oldest"},{"value":"lowest_price","label":"Lower price"},{"value":"highest_price","label":"Higher price"},{"value":"trending","label":"Trending"}],"itemListId":"type_print_ready","gaList":"rc-boat","filtersOptions":{"pricing":{"label":"Price","filters":[{"value":"premium","label":"Translation missing: en.browser.filters.premium","tagColorClass":"metaverse-listing__count-tag"},{"value":"free","label":"Free","tagColorClass":"metaverse-listing__count-tag"},{"value":"collection","label":"Translation missing: en.browser.filters.collection","tagColorClass":"metaverse-listing__count-tag"},{"value":"sale_off","label":"On sale","tagColorClass":"metaverse-listing__count-tag"},{"value":"subscribed","label":"Subscription","tagColorClass":"metaverse-listing__count-tag"},{"value":"exclude_free","label":"Exclude free","count":null}]},"modelType":{"label":"Type","filters":[{"value":"print_ready","label":"3D print","tagColorClass":"metaverse-listing__count-tag"},{"value":"cgt_verified","label":"3D Print Verified","tagColorClass":"metaverse-listing__count-tag"},{"value":"with_makes","label":"Has Makes","tagColorClass":"metaverse-listing__count-tag"}]},"polygons":{"label":"Poly count","filters":[{"value":"range_0_5000","label":"Up to 5K"},{"value":"range_5000_10000","label":"5 - 10K"},{"value":"range_10000_50000","label":"10 - 50K"},{"value":"range_50000_100000","label":"50 - 100K"},{"value":"range_100000_250000","label":"100 - 250K"},{"value":"more_than_250000","label":"250K+"}]},"fileTypes":{"label":"File formats","isSearchable":true,"filters":[{"value":"21","label":"Blender (.blend)"},{"value":"12","label":"OBJ (.obj, .mtl)"},{"value":"51","label":"Stereolithography (.stl)"},{"value":"5","label":"Autodesk FBX (.fbx)"},{"value":"17","label":"Autodesk 3ds Max (.max)"},{"value":"6","label":"Cinema 4D (.c4d)"},{"value":"11","label":"Autodesk Maya (.ma, .mb)"},{"value":"117","label":"glTF (.gltf, .glb)"},{"value":"14","label":"Sketchup (.skp)"},{"value":"96","label":"UnrealEngine (.uasset)"},{"value":"83","label":"Unity 3D (.unitypackage, .prefab)"},{"value":"127","label":"USDZ (.usdz)"},{"value":"207","label":"USD (.usd)"},{"value":"13","label":"Rhinoceros 3D (.3dm)"},{"value":"2","label":"3D Studio (.3ds)"},{"value":"8","label":"Lightwave (.lwo, .lw, .lws)"},{"value":"25","label":"Collada (.dae)"},{"value":"15","label":"Autodesk Softimage (.hrc, .xsi)"},{"value":"7","label":"DXF (.dxf)"},{"value":"33","label":"Modo (.lxo, .lxl)"},{"value":"4","label":"AutoCAD (.dwg)"},{"value":"47","label":"Shockwave 3D (.w3d)"},{"value":"59","label":"SolidWorks (.sldprt, .sldasm, .slddrw)"},{"value":"54","label":"Vue (.vue)"},{"value":"29","label":"IGES (.ige, .igs, .iges)"},{"value":"28","label":"High-Res Renderings (.hrd)"},{"value":"55","label":"Zbrush (.ztl, .zbp)"},{"value":"40","label":"Poser (.pz3, .pp2)"},{"value":"23","label":"Bryce (.br5, .obp)"},{"value":"35","label":"Maxwell Render (.mxs)"},{"value":"42","label":"Renderman (.rib, .slc, .sl, .slo)"},{"value":"48","label":"Silo (.sia)"},{"value":"60","label":"Cheetah3D (.jas)"},{"value":"63","label":"Leaderwerks (.gmf)"},{"value":"66","label":"Torque 3D (.dts)"},{"value":"67","label":"MilkShape 3D  (.ms3d)"},{"value":"68","label":"Blitz3d (.b3d)"},{"value":"70","label":"Solid Edge (.asm, .par, .psm, .dft)"},{"value":"71","label":"Autodesk Inventor (.iam, .ipt)"},{"value":"72","label":"STEP (.stp)"},{"value":"82","label":"JewelCAD (.jcad, .jcd)"},{"value":"89","label":"3D Coat (.3b)"},{"value":"90","label":"AC3D  (.ac)"},{"value":"91","label":"Artlantis (.atl, .atla, .atlo)"},{"value":"98","label":"Terragen (.tgo)"},{"value":"99","label":"Houdini (.hda, .hip, .bgeo, .geo, .bclip, .clip, .hipnc)"},{"value":"100","label":"PDF (.pdf)"},{"value":"101","label":"Substance Painter (.spp, .sbsar, .spsm)"},{"value":"102","label":"DAZ Studio (.duf)"},{"value":"103","label":"iClone (.iprop, .iAcc, .iCloth, .iAvatar, .iEffect)"},{"value":"104","label":"Alembic (.abc)"},{"value":"107","label":"Autodesk Fusion 360 (.f3d)"},{"value":"108","label":"MDL Material (.mdl)"},{"value":"110","label":"3ds Max macroScript (.ms)"},{"value":"111","label":"ArchiCAD (.gsm)"},{"value":"113","label":"CATIA (.CATProduct, .CATMaterial, .CATAnalysis)"},{"value":"114","label":"Octane Render (.orbx)"},{"value":"115","label":"Mudbox (.mud)"},{"value":"116","label":"Adobe Dimension (.asd, .dn)"},{"value":"119","label":"Python Script (.py, .pyc)"},{"value":"120","label":"Maya Mel Script (.mel)"},{"value":"123","label":"Substance Designer (.sbs, .sbsprs, .sbsar)"},{"value":"129","label":"3D Manufacturing File (.3mf)"},{"value":"130","label":"Autodesk Alias (.wire)"},{"value":"131","label":"formZ (.fmz)"},{"value":"133","label":"Strata 3D (.s3d)"},{"value":"134","label":"trueSpace (.cob, .scn, .rsobj, .rsscn)"},{"value":"135","label":"CryEngine (.cga, .cgf, .chr, .skin)"},{"value":"137","label":"Marmoset Toolbag (.tbscene, .tbmat)"},{"value":"139","label":"Alibre/Geomagic (.ad_prt, .ad_asm, .ad_dwg, .ad_smp, .ad_pkg)"},{"value":"140","label":"Marvelous Designer (.zpac, .avt, .pos, .ZPrj)"},{"value":"141","label":"Autodesk Revit (.rfa, .rvt)"},{"value":"144","label":"Biovision Hierarchy (.bvh)"},{"value":"145","label":"Lumion (.ls8)"},{"value":"146","label":"Autodesk Inventor (.idw)"},{"value":"147","label":"3D ACIS (.sat)"},{"value":"149","label":"KeyShot (.bip, .ksp)"},{"value":"183","label":"Clarisse IFX (.project)"},{"value":"184","label":"Mari (.mra)"},{"value":"185","label":"mat (.mat)"},{"value":"187","label":"MCG Tool (.mcg)"},{"value":"188","label":"VRML (.wrl)"},{"value":"189","label":"Ply (.ply)"},{"value":"191","label":"amf (.amf)"},{"value":"192","label":"GrowFX (GrowFX)"},{"value":"196","label":"Lumion (.ls9)"},{"value":"197","label":"VDB (.vdb)"},{"value":"199","label":"Lumion (.ls10)"},{"value":"200","label":"ARTCam (.art)"},{"value":"201","label":"fbm (.fbm)"},{"value":"202","label":"Coordinate 3D (.c3d)"},{"value":"204","label":"3ds Max Render Preset Settings (.rps)"},{"value":"205","label":"Twinmotion (.tm)"},{"value":"206","label":"D5 Render (.drs)"},{"value":"208","label":"Vectorworks (.vwx)"},{"value":"209","label":"Blockbench (.bbmodel)"},{"value":"210","label":"Parasolid (.x_t, .x_b)"},{"value":"211","label":""},{"value":"212","label":"SVG (.svg)"},{"value":"213","label":"Adobe Illustrator (.ai)"},{"value":"214","label":"EPS (.eps)"},{"value":"215","label":"PNG (.png)"},{"value":"216","label":"JPG (.jpg)"},{"value":"217","label":"Adobe Photoshop (.psd)"},{"value":"218","label":"Machine Training Bundle (.mtb)"},{"value":"219","label":"EXR (.exr)"},{"value":"220","label":"G-code (.gcode,, .mpt,, .mpf,, .nc)"},{"value":"221","label":"LYC (.lyc)"},{"value":"222","label":"MP4 (.mp4)"},{"value":"223","label":"Lumion (.ls11)"},{"value":"224","label":"Lychee Slicer Project File (.lys)"},{"value":"225","label":"Chitubox Slicer Project File (.chitubox)"},{"value":"226","label":"Binary G-code (.bgcode)"},{"value":"227","label":"GSplat (.splat)"},{"value":"228","label":"JSON (.json)"},{"value":"229","label":"PyTorch (.pt, .pth)"},{"value":"230","label":"PyTorch Lightning (.ckpt)"},{"value":"231","label":"YAML (.yaml)"}]},"priceRange":{"filters":[{"value":"range_2_10","label":"$2 - $10"},{"value":"range_10_20","label":"$10 - $20"},{"value":"range_20_50","label":"$20 - $50"},{"value":"range_50_100","label":"$50 - $100"},{"value":"more_than_100","label":"$100+"}]},"designers":{"label":"Designer","filters":[]},"licenses":{"label":"Content filters","filters":[{"value":"collections_only","label":"Packs only"},{"value":"exclude_3d_print","label":"Exclude 3D Print"},{"value":"exclude_editorial","label":"Exclude editorial license"},{"value":"has_video","label":"Has video"},{"value":"has_marmoset","label":"Has 3D viewer"},{"value":"exclude_ai_generated","label":"Exclude AI generated content"},{"value":"cgt_standard_only","label":"CGT Standard"}]}},"score":[{"id":"6764644","score":1673553.9},{"id":"6765873","score":1587313.2},{"id":"4949954","score":1468016.2},{"id":"4374742","score":1403781.6},{"id":"4687525","score":1381083.6},{"id":"2482040","score":1245183.8},{"id":"4520548","score":1173771.1},{"id":"2226940","score":1167333.8},{"id":"875713","score":1167006.2},{"id":"4834557","score":1139899.6},{"id":"6967559","score":1131355.2},{"id":"7281501","score":1014599.6},{"id":"6784696","score":999559.6},{"id":"6040007","score":997582.94},{"id":"2077575","score":973790.8},{"id":"6315521","score":957298.5},{"id":"5677934","score":880690.1},{"id":"4885817","score":842840.1},{"id":"2886336","score":842144.3},{"id":"4233859","score":830272.3},{"id":"5823225","score":810376.75},{"id":"2868115","score":772721.56},{"id":"5823426","score":712178.75},{"id":"3294504","score":681895.4},{"id":"6595668","score":638730.7},{"id":"2462917","score":637114.1},{"id":"4791828","score":625767.75},{"id":"5699869","score":624467.44},{"id":"2887139","score":620195.0},{"id":"2888904","score":618400.2},{"id":"1930327","score":596658.56},{"id":"3474346","score":553812.9},{"id":"2888655","score":541958.4},{"id":"3986410","score":490939.53},{"id":"1932032","score":485957.4},{"id":"876475","score":480431.28},{"id":"2981273","score":451197.53},{"id":"3606707","score":419896.22},{"id":"7033344","score":404192.22},{"id":"3986369","score":398287.5},{"id":"3893886","score":359169.4},{"id":"6650702","score":335823.62},{"id":"4306349","score":334451.03},{"id":"5198957","score":333669.53},{"id":"5219131","score":327858.66},{"id":"4053913","score":325001.03},{"id":"2941615","score":324130.47},{"id":"5334277","score":320587.06},{"id":"3566321","score":316674.28},{"id":"2616193","score":314093.94},{"id":"2324648","score":308610.78},{"id":"1916304","score":308222.44},{"id":"4563764","score":297677.84},{"id":"7302796","score":286999.9},{"id":"5213472","score":277701.34},{"id":"1984716","score":256831.9},{"id":"3564607","score":249696.89},{"id":"5901485","score":249520.05},{"id":"980602","score":247800.25},{"id":"5624519","score":247514.03},{"id":"6307688","score":244633.11},{"id":"6344714","score":240793.39},{"id":"1877450","score":240130.78},{"id":"6810506","score":233036.47},{"id":"3556276","score":232735.78},{"id":"2292513","score":231897.31},{"id":"6457440","score":226655.36},{"id":"2368560","score":225637.66},{"id":"7083105","score":223961.92},{"id":"7000731","score":221414.23},{"id":"2037725","score":218838.22},{"id":"6428211","score":218155.0},{"id":"2355449","score":207424.31},{"id":"6765908","score":203252.73},{"id":"6491798","score":202189.73},{"id":"7137589","score":200936.88},{"id":"7018504","score":195835.19},{"id":"6797260","score":193997.03},{"id":"1857683","score":192506.02},{"id":"6342270","score":191778.94},{"id":"7117109","score":189196.45},{"id":"5783149","score":188953.58},{"id":"6260008","score":188943.45},{"id":"6401551","score":188306.03},{"id":"6776177","score":187503.52},{"id":"6715780","score":185159.69},{"id":"4433514","score":179551.67},{"id":"7274303","score":179296.94},{"id":"7117492","score":179115.34},{"id":"7184573","score":174496.94},{"id":"6709049","score":173918.67},{"id":"6949480","score":170741.83},{"id":"6843913","score":167484.38},{"id":"5527455","score":166844.95},{"id":"7299529","score":165620.84},{"id":"6852642","score":161956.05},{"id":"2656098","score":160796.72},{"id":"7304845","score":159096.94},{"id":"7310767","score":158181.6},{"id":"6128467","score":157197.55},{"id":"7211759","score":156536.03},{"id":"7294221","score":151291.0},{"id":"4124517","score":151258.5},{"id":"6899520","score":150920.5},{"id":"7004502","score":150918.55},{"id":"3367435","score":148221.47},{"id":"7319819","score":142021.52},{"id":"6876597","score":139079.33},{"id":"6205219","score":137895.66},{"id":"3648219","score":137705.95},{"id":"6373265","score":134634.1},{"id":"6430693","score":134410.78},{"id":"6255137","score":133656.38},{"id":"5297399","score":132666.77},{"id":"6872378","score":130824.07},{"id":"7198781","score":130140.3},{"id":"5999782","score":130104.08},{"id":"6170595","score":128322.05},{"id":"4520963","score":127996.48},{"id":"4823701","score":127698.47}],"tag_links":{"header":"Check other trending 3D print models","links":[{"title":"Jewelry STL files","link":"https://www.cgtrader.com/3d-print-models/jewelry"},{"title":"Dragon STL files","link":"https://www.cgtrader.com/3d-print-models/dragon"},{"title":"Cat STL files","link":"https://www.cgtrader.com/3d-print-models/cat"},{"title":"Pokemon STL files","link":"https://www.cgtrader.com/3d-print-models/pokemon"},{"title":"Warhammer 40k STL files","link":"https://www.cgtrader.com/3d-print-models/warhammer-40k"},{"title":"Colt STL files","link":"https://www.cgtrader.com/3d-print-models/colt"},{"title":"Mask STL files","link":"https://www.cgtrader.com/3d-print-models/mask"},{"title":"Snake STL files","link":"https://www.cgtrader.com/3d-print-models/snake"},{"title":"Transformers STL files","link":"https://www.cgtrader.com/3d-print-models/transformers"},{"title":"Animal STL files","link":"https://www.cgtrader.com/3d-print-models/animal"},{"title":"Skull STL files","link":"https://www.cgtrader.com/3d-print-models/skull"},{"title":"Godzilla STL files","link":"https://www.cgtrader.com/3d-print-models/godzilla"},{"title":"Sonic STL files","link":"https://www.cgtrader.com/3d-print-models/sonic"},{"title":"Dog STL files","link":"https://www.cgtrader.com/3d-print-models/dog"},{"title":"Helmet STL files","link":"https://www.cgtrader.com/3d-print-models/helmet"},{"title":"Sword STL files","link":"https://www.cgtrader.com/3d-print-models/sword"},{"title":"Wargaming STL files","link":"https://www.cgtrader.com/3d-print-models/wargaming"},{"title":"Boat STL files","link":"https://www.cgtrader.com/3d-print-models/boat"}]},"suggested_search":null,"isSimilarSearchPossible":true,"url":"/3d-models/rc-boat","saveSearchSettings":null,"isSalesBoostEnabled":true,"subscriptionBadgesEnabled":null,"hideSuggestionsSection":null,"is_user_logged_in":false,"should_show_all_items_on_mobile":true}