Martin Baker Mk3 Ejection Seat as found in Hawker Hunter, V Bombers, canberra, Javelin, Swift & other aircraft in the 1960s. This 3h model is designed to fit the Revell 1/32 Hunter FGA.9 /Mk 58 as a direct replacement for the kit part.

The seat is provided with & without straps. The dimensions of the mesh are real world scale, in metric, and for the version with straps these are X: 0.517288m , Y: 1.19129m , Z: 1.3527m,for a 1/32 aircraft use 422.271mm for the height (Z) in your slicer & set constrain proportions to on.

Scale Settings:Useful settings: For 1/72th, Scale = 1388.888%. For 1/48th, Scale = 2083.333% . For 1/32th, Scale = 3125.000%.For 1/24th, Scale = 4166.666%

How to calculate this percentage for the slicer without knowing the model dimensions. First we know that the model unit is 1m, and has been interpreted by the slicer as 1mm. 1m = 1000mm, so to get the right scale, divide 1000 by your scale. EG 1000 divided by 48 = 20.83333. Now multiply the result by 100 because we need a percentage. The final result is 2083.333 as shown above. All other scales use the same formula.

The screenshots of the printed object show suggested orientation. This model is designed for medium scale models (1/48th & above) smaller scales may lose fine detail. The print shown in the preview is at 1/32 scale using automatic supports on a Anycubic M5. with default settings other than a .02 layer height.

Use lower than 0.05mm layer height & lower AA settings for best results.

License in addition to the one supplied by CGTraderFor any 3d model: No Commercial bulk buying, library inclusion, collection, or similar inclusion in commercial collections allowed without the written permission of the author.No Sharing: Uder no circumstances may you share these digital files or any derivatives, including orthographic renders for use as blueprints.

For 3d printable models:- For Private Use Only. No Commercial Sales: Either of printed 3d models, complete, or as parts. This also applies to digital files.No Derivatives: All altered meshes, separated parts & components, & reprints are subject to this license.No sampling: IE Using of parts of printed or digital 3d files in kitbashing etc where the resulting model is not for personal use only.