German WWII Stuka Pilot 3D print model

A Pilot suitable for upright type bucket seats. Designed initially to fit the 1/32 Trumpeter Ju-87A Stuka, but may be suitable for other bomber types with upright bucket seats. Comes with alternative heads, arms and a separate Ju-87A or B Unarmoured Stuka seat.
Additionally, It has optional arms holding The early A model Yoke type stick as well as one with the later pistol grip type.

IMPORTANT:The model is made in real world Metric units. This will often import into a slicer as 1m=1mm. So adjust your decimal point accordingly. A 1m cube at 1/32 print scale will be 0.03125m (31.25mm). to get a percentage, multiply by 100, giving 3125%

*Using the file Pilot_All Parts as an example, which is 2.343m in Y :- *1: This loads at 2.343mm at 100% scale. Note this is not 1/32, it is 1/1000.2: Convert to 1/32 scale by dividing by 32. So 2.343mm / 32 = 0.07321875mm. 3: Because that is 1000x too small, move the decimal point 3 places right, to get 73.22mm (rounded up,) for that dimension. Your scale will be NEAR 3125% because of rounding.

If a dimension is not known, just load the model & use the 1/32 scale factor which is 3125.00%

License in addition to the one supplied by CGTraderFor any 3d model: No Commercial bulk buying, library inclusion, collection, or similar inclusion in commercial collections allowed without the written permission of the author.No Sharing: Uder no circumstances may you share these digital files or any derivatives, including orthographic renders for use as blueprints.

For 3d printable models:- For Private Use Only. No Commercial Sales: Either of printed 3d models, complete, or as parts. This also applies to digital files.No Derivatives: All altered meshes, separated parts & components, & reprints are subject to this license.No sampling: IE Using of parts of printed or digital 3d files in kitbashing etc where the resulting model is not for personal use only.