Future Redline is an original sport motorcycle with a 90-degree V-twin, built at real-world scale (1 unit = 1 m) and assembled like the real thing. Every part is placed from one set of master dimensions (1474 mm wheelbase, 24-degree rake, 93 mm trail, about 820 mm seat height), and an automated check confirms that the wheels line up, the chain closes, the calipers sit on their discs and no parts pass through each other.
What's modelled
- Engine: 90-degree V-twin with finned barrels and heads, cam and belt covers, coils, an open clutch cover with pressure plate and springs, starter, water pump, oil filter, sump, thermostat and coolant hoses, radiator and reservoir, airbox and injectors, oil-pressure and neutral sensors
- Drive: 520 roller chain with 114 individually modelled links (inner and outer plates, pins, rollers, O-rings) at the real 15.875 mm pitch, seated on 15T / 43T sprockets, with chain slider, guide and guard
- Chassis: steel trellis frame, swingarm with chain adjusters, subframe, engine mounts
- Front: 43 mm USD forks with clamps and radial caliper lugs, carbon front mudguard
- Rear: linkage monoshock with helical spring and piggyback reservoir, rocker and pull rods
- Brakes: twin 320 mm floating front discs with radial 4-piston calipers, 245 mm rear disc with 2-piston caliper, ABS tone rings, sensors and hydraulic unit, brake hoses with banjo fittings
- Wheels and tyres: cast 5-split-spoke wheels, 120/70 ZR17 and 180/55 ZR17 tyres with sidewall lettering (fictional brand)
- Exhaust: 2-into-1 headers, catalytic canister, under-engine silencer with twin outlets, slip clamps, springs, heat shields, O2 sensors
- Bodywork: sculpted fuel tank with knee covers, filler cap and pump flange, seat, tail cowl, side panels, undertray, plate holder, rear hugger, radiator shrouds
- Cockpit and lights: LED headlight, TFT dash, bars, mirrors, switchgear, levers, master cylinders
- Electrical: battery, ECU, fuse box, relays, regulator, diagnostic connector, horn, and a routed wiring loom with branches to every sensor and switch
- 268 fasteners (bolts, nuts, washers) as linked duplicates
Scene (Blender file)
- 18 named collections (chassis, engine, drivetrain, chain, suspension, wheels and brakes, exhaust, bodywork, electrical, wiring, fasteners, lighting, studio)
- Everything parented to one root empty, so the whole bike moves as one
- Studio with an infinity-curve floor and area lights, 12 cameras (hero, side, front, rear, top and six close-ups), Cycles with AgX colour management
- Renders are straight out of Blender with no post-processing
Formats
- Blender 5.3 (.blend) - full scene with studio, cameras and the full procedural material library
- FBX - bike only, modifiers applied
- GLB - bike only, repeated parts kept instanced; a lighter decimated GLB is included too
Notes
- Materials are procedural Principled BSDF (no image textures). In FBX and GLB you get base colour, metallic and roughness; tyre tread and carbon weave are shader effects that only show in Blender.
- UVs are automatic cube projections, fine for tiling materials but not a hand-packed atlas.
- Static model at ride height; not rigged.
- Internal engine parts (crank, pistons, gears) are not modelled.
- An original design: no real brand names or logos. Dimensions are realistic approximations, not data from any manufacturer.
Technical
- 363,150 polygons / 384,150 vertices (740,314 triangles), bike only
- 717 mesh objects (361 unique meshes), 43 procedural PBR materials
- Real-world metric scale, no plugins needed