Easy 3D printable clamp in two pieces.

Two types of holding surfaces : smooth or with serrationsRequires a M6 screw with hexagonal head and two M6 nuts :

• to hold thin parts, you will need a 80mm long screw
• to hold parts thicker than 20mm, you will only need a 60mm long screw

Printing instructions : print the two pieces together or separatly, no need for supports if printed as shown in the preview

Building instructions : - put the screw through the wheel - secure it tightly with a nut - put the other nut in the slot in the body and screw everything together

Enjoy !