This is a Replica of the SkyFall P1-Sun represents the cutting edge of low-cost, high-attrition warfare. Engineered in Ukraine, this high-speed interceptor is purpose-built to hunt and neutralize loitering munitions like the Shahed-136.

This 3D-printable set is a high-fidelity 1:1 scale replica designed for Technical Intelligence (Tech Intel), educational display, and drone-tech enthusiasts. It features a modular internal layout that allows you to visualize exactly how these interceptors are packed for maximum speed and impact.

Design & Interceptor MechanicsThe P1-Sun is a masterclass in additive defense. This model replicates the sleek, aerodynamic profile required for high-velocity intercepts:

The Full Assembly: A dimensionally accurate 1:1 replica of the airframe currently in theater.

The Prop-Pack Internals: This set includes 3D-printable props for the core components:

High-KV Brushless Motors & Propellers

Flight Controller (PCB) & ESC stack

FPV Camera & VTX antenna

High-capacity LiPo Battery cell

The Cutaway: A sectioned version of the fuselage and motor mounts to show how the payload and propulsion systems are integrated into the frame.

Assembly & HardwareThis model is designed for a realistic workshop assembly experience.

Included in this SetP1-Sun Airframe (Full): Multi-part print optimized for small beds (like the Bambu A1)

P1-Sun Cutaway: Sectioned airframe revealing internal mounting points.

Prop Component Kit: STL files for the battery, motors, camera, and PCB stacks.

This is not a official (P1-SUN) Nor do I work with them. This is only a mer Non function Replica using open source information and my own skills to recreate this awesome drone!

DISCLAIMERThis is a NON-FUNCTIONAL INERT REPLICA. It is intended for display, cinematic props, and educational purposes only. It does not include flight software, nor should it be used for actual flight.

FILE USE POLICYYou may not sell, redistribute, or modify these files for resale. For commercial licensing or custom training aids, contact: RedwireSolutions.info@gmail.com

3D printing settingsConstruction: Use a combination of high-strength adhesive (CA Glue) and reinforced aluminum tape for the wing-to-body joins, mimicking the field-expedient manufacturing used in real production.

Hardware Ready: While printed props are included, the internal mounts are sized for Standard 5-inch drone components. You can swap the printed props for real burnt-out motors or old PCBs to create a museum-grade display.

Printer: Optimized for Bambu Lab A1 (256x256mm) and larger.

Walls/Infill: 2 walls, 5% Gyroid infill to keep the airframe lightweight but rigid.

Material: PLA+ ASA PA6-CF ETC

Supports: PETG Interface