Intended for 3d print at 15mm to 54mm scale.

Inspired by the dystopian architecture of Bullfrog's 1993 video game. Simple 3d-printable, modular buildings requiring minimal supports. Intended for 15 to 54 mm scale tabletop wargames.

Consult the image gallery for a presentation of the building parts included. The building kit will give you the ability to construct buildings with an infinite amount of storeys, anything from a low-profile bunker to a cloudpiercing skyscraper.

All building parts should print fine at any scale between 15mm and 54mm scale. The kit also includes a 6mm scale building that can be used for vintage Warhammer Epic games or similar 6mm scale tabletop games.

The building parts are blocky and should print with a minimal amount of supports added. No parts are currently presupported. If you want any/all model parts in presupported format, you can contact me and I will include them in the kit.

Note that you can find a 360 degree turntable presentation of the buildings in the image gallery.

Wikipedia article about the 1993 video game:

en.wikipedia.org/wiki/Syndicate_(1993_video_game)

Printing instructions

Relatively high printer settings are recommended (0,08 mm layer height, 20 percent infill).Printing time depends entirely on hardware, selected size, selected model(s) selected settings et cetera. A rough estimate is 7 hours printing time for a single model part at 28mm scale.

All model parts are prescaled to 28mm scale (except the model part named 6mm version). PLEASE NOTE that the building parts are not guaranteed to fit within the printing space of your 3d printer. If an individual building part is too large to fit within your printer area, I suggest using the cutting tool in your slicer software and simply divide the model part in two. The building designs are so blocky any simple, you should have no problem merging the two pieces together post-print.