A beautiful and modern spiral patterns lampshade.

• Perfectly suitable for a standard E27 lightbulb (110mm height x 60mm wide).
• Works with most sockets.
• Can be printed in both ABS and PLA (that's what we printed with). Check the images for the correct print position.

The top screw is a M9 or a M10, depending on your needsYou can print it in any filament color and spray paint it afterwards (that's what we did, anyway)

Check the attached image for dimensions. If you need a different size to fit the light socket or the bulb, just drop a message or post a comment.

3D printing settings

M9_screw.stl / M10_screw.stl.1 mm layer height30% infillno support0.586/0.637 meters of filament ~ 1.76g/1.91gabout 1h 30 minutes @ 3000mm/s

socket_top_cover.stl.2 layer height30% infillno support1 meter of filament ~ 3.07g about 20 minutes @ 3000mm/s

lamp_shade_top.stl.3mm layer heightno infillno support3.131 meters of filament ~ 9.42gabout 1h 20 minutes @ 3000mm/s

lamp_shade_bottom.stl.3mm layer heightno infill no support12 meters of filament ~ 36.21gabout 4h 25 minutes @ 3000mm/s