Wall bracket - 3D print model
This wall brackets are suitable to boxes (semicircle at the ends) with w/l ca. 4,4/4,0 x 12,0 cm, fits eg:
- Giant Spice Shaker from Tupperware and
- a box from Leorzx
- a spice box from Kik/Tedi/idea-station.
Contains a version with screw mounting and one compatible to the Ikea pegboard Skadis for 1er, 2er, 3er and 4er wall brackets.
The 3d-model is drawn in cm, but perhaps you have to import the stl-file in mm in your programm.
Printing Information Wall bracket (screw mounting) GB - KTC - W - 01: Infill 33%, Build time 1h21, Filament length 6532.6 mm, Plastic weight 19.64g (0.04 lb) GB - KTC - W - 02: Infill 33%, Build time 2h18, Filament length 11609.1 mm, Plastic weight 34.90g (0.08 lb) GB - KTC - W - 03: Infill 33%, Build time 3h15, Filament length 16708.5 mm, Plastic weight 50.24g (0.11 lb) GB - KTC - W - 04: Infill 33%, Build time 4h13, Filament length 21740.2 mm, Plastic weight 65.36g (0.14 lb)
Printing Information Wall bracket (compatible to Skadis (Ikea)) The area of fixing should be print with 90% infill (results of my tests with PLA), because otherwise it could break. GB - KTC - H - 01: Infill 33%, Build time 1h26, Filament length 6962.4 mm, Plastik weight 20.93g (0.05 lb) GB - KTC - H - 02: Infill 33%, Build time 2h26, Filament length 12239.7 mm, Plastik weight 36.80g (0.08 lb) GB - KTC - H - 03: Infill 33%, Build time 3h26, Filament length 17553.2 mm, Plastik weight 52.78g (0.12 lb) GB - KTC - H - 04: Infill 33%, Build time 4h27, Filament length 22820.6 mm, Plastik weight 68.61g (0.15 lb)