• T-rex cup holder needs NO supports
• can also used for candles
• (the color of the model is depend of the color of the filament i colored my version manually using acrylic colors)
• Because of the difference in accuracy between 3d printers if the parts don't fit you can drill it or you can cut small parts of the plastic until it fit.
• Original and modified digital files should NEVER be resold, shared or given away
• assembling the 3D printed parts:

- https://youtu.be/wSoraZoO-i0

• To sell prints commercially this is the Patreon page to get commercial Licenses:
• https://patreon.com/EliteGeek?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=creatorshare_fan&utm_content=join_link

- 3D printing settings

• Print parameters:

- 21 X 18 X 5 Centimeter- Slicer software: Cura- Printer: Ender 3 V02

• 3D printing settings
• Resolution:0.1 mm or 0.2 mm
• Nozzle: 0.4
• Nozzle Temp: 205
• Need Supports: no
• But with some kinds of 3d printers you might need Supports for the eyes mechanism
• Filament: PLA+
• Infill: 40%
• initial layer height: 0.2
• top/ bottom line width: 0.3
• brim line width : 0.4
• shell
• wall thickness: 1.2
• print speed: 42

- build plate adhesion type : skirt