ainaritxu14
good job
Useto navigate. Pressescto quit
HULK articulated action figure 3D print model
Description
- A 3D printed 1/12 articulated action figure of Hulk
- (the color of the model is depend of the color of the filament i colored my version manually)
- Because of the difference in accuracy between 3d printers if the parts don't fit you can drill it or you can cut small parts of the plastic until it fit.
- assembling the 3D printed parts:
https://www.youtube.com/watch?v=--4RDqhgZvs
this model was printed by Ender 3 pro FDM printer with Esun PLA+ Filament so im not sure if it can be printed by resin printer.
this model is not recommended for completed beginners in 3d printing because it need some experience in 3d printing to be made.
- Resolution: 0.1 mm
- Nozzle: 0.4
- Need Supports: Yes
- Filament: PLA
- Infill: 40%
- initial layer height: 0.2
- top/ bottom line width: 0.3
- shell
- wall thickness: 1.2
- prin speed: 42
- build plate adhesion type : brim
A
adel85 2022-11-26 15:10:10 UTCadel85
thank you
TheNuance
is there a way i can make the legs smaller i want to try and make a custom gear four luffy from one piece and use it as a base
TheNuance
is there a way i can make the legs smaller i want to try and make a custom gear four luffy from one piece and use it as a base
A
adel85 2022-05-26 00:05:27 UTCadel85
i'm so sorry but if you make the legs smaller the joints may not work
I
isaiahd99 2021-09-04 17:34:34 UTCisaiahd99
Sir It won’t load the stl files into any slicer. When I try it says there is a problem with the models and crashes my slicer programs.
A
adel85 2021-09-04 20:10:46 UTCadel85
it seems that the files are maybe too heavy for your machine
do you load all the stl files at once or one at time?
I
isaiahd99 2021-09-04 20:34:16 UTCisaiahd99
One at a time
I
isaiahd99 2021-09-04 20:34:25 UTCisaiahd99
One at a time
I
isaiahd99 2021-09-03 02:01:49 UTCisaiahd99
I purchased the hulk and none of the stl files can be sliced. It causes cura to crash when I try to upload them to slice. Anyway you can help me with this?
A
adel85 2021-09-03 18:54:04 UTCadel85
i'm so sorry you have this problem
is all the files crash when you try to slice them or just by opening them in cura?
I
isaiahd99 2021-09-03 19:31:40 UTCisaiahd99
Yessir all of them keep crashing
I
isaiahd99 2021-09-04 15:48:13 UTCisaiahd99
Cura crashes, meshmixer crashes, slic3r crashes.
A
adel85 2021-09-03 19:37:36 UTCadel85
did you use my 3D printing settings?
Resolution: 0.1 mm
Nozzle: 0.4
Need Supports: Yes
Filament: PLA
Infill: 40%
initial layer height: 0.2
top/ bottom line width: 0.3
brim line width : 0.4
shell
wall thickness: 1.2
prin speed: 42
build plate adhesion type : brim
Similar Models
to HULK articulated action figure
