• A 3D printed articulated action figure model with superhero body proportions
• Because of the difference in accuracy between 3d printers if the parts don't fit you can drill it or you can cut small parts of the plastic until it fit.
• assembling the 3D printed parts:

• https://youtu.be/hgCgmp-5d8E

• this model was printed by Ender 3 pro FDM printer with Esun PLA+ Filament so im not sure if it can be printed by resin printer.

- this model is not recommended for completed beginners in 3d printing because it need some experience in 3d printing to be made.- 3D printing settings

• Resolution: 0.1 mm
• Nozzle: 0.4
• Need Supports: Yes
• Filament: PLA
• Infill: 40%
• initial layer height: 0.2

- top/ bottom line width: 0.3- brim line width : 0.4

• shell
• wall thickness: 1.2

- prin speed: 42- build plate adhesion type : brim

• Need Supports: Yes
• Filament: PLA
• Printing time: 32 hours
• Infill: 40%