1/11
1/50 Oberon-Class Submarine – High-Detail R/C Scale ModelBring a legend of the Cold War to the water with this highly accurate 1/50 scale replica of the Oberon-Class Submarine. Known for being among the quietest conventional submarines of their era, the O-boats are a favorite for scale enthusiasts due to their sleek, menacing lines and iconic bow dome.
The Real Legend: SpecificationsThe Oberon-class was the pinnacle of British post-war conventional submarine design.
Length: 89.9 meters (295 ft)
Beam: 8.1 meters (26.5 ft)
Speed: 12 knots surfaced / 17 knots submerged
Role: Long-range patrol and surveillance
Model OverviewThis model has been engineered specifically for Radio Control (R/C) conversion. Unlike static models, the internal architecture is designed to house a 100mm WTC (Watertight Cylinder).
Scale: 1/50
Length of Model: Approx. 180 cm (70.8 inches)
Hull Design: The hull is split longitudinally (horizontal split). This provides superior access to the internal components, linkage setup, and WTC placement compared to traditional vertical cuts.
WTC Compatibility: Designed to fit a 100mm diameter WTC (Note: WTC and electronics are not included).
Functional Features: The files include internal preparations to make the periscopes and masts electrically retractable, allowing for ultimate realism on the water.
Technical FeaturesOptimized for Printing: Divided into manageable sections to fit standard large-format printers while maintaining structural integrity.
Scale Detail: Includes accurate rivet patterns (where applicable), casing vents, rudder assemblies, and the distinctive sonar bow.
Easy Access: The split-hull design makes maintenance and battery swaps at the lakeside quick and easy.
What’s Included?High-resolution STL files for the full hull, conning tower (fin), and control surfaces.
Internal support structures for the 100mm WTC mounting.
Note: Please note: This is not a commercial, ready-to-assemble kit. No assembly instructions are included. Some experience with building submarines is recommended. This is a only digital STL file pack for 3D printing. To make the model operational, you will need a 100mm WTC, motor, ESC, servos, battery, and R/C gear.
REVIEWS & COMMENTS
accuracy, and usability.
Oberon Class Submarine 1 to 50 scale for RC 3D print model
- Yours forever — royalty-free license
- 1 file format included
- Instant download after purchase
