2.382MOST IMPORTANT THING FIRST: THIS IS A LIVING PROJECT. IF YOU WOULD LIKE TO MAKE ANY CHANGES, PLEASE WRITE TO ME!

Approximately 180 different files

I'm offering a 1:100 scale RC-ready model of a German Navy frigate, specifically the Sachsen-class frigate (this one will be the F220 Hamburg). ;)

The hull is constructed from 8 sections, which can be glued and/or screwed together (I personally glue and then screw them together). At a 1:100 scale, the model reaches a length of approximately 144 cm.

All parts are designed to be printed with a build volume of 220 × 220 × 250 mm and a 0.4 mm nozzle.

I have personally printed all the files offered here with the aforementioned build volume and nozzle and have also tested them for water resistance.

This version has holes in the superstructure; these serve as cable routing for the lighting (SMD 0603).

To build the model as a static display model, you will need:

This file

• Glue or screws (M3 × 10)

For operation, you will also need:

• Servo for the rudder
• Motors, e.g., from Tamiya (540 series)

• Shaft and stern tube (I personally simply used a copper tube with an outer diameter of 6 mm and a 4 mm aluminum rod, and modified the ends with a Dremel tool) ;)

• Shaft coupling (to connect the motor to the shaft)

• N20 geared motor for the rotating Smart car

I have personally tested/verified the hull, superstructure, lighting, rotating Smart car, smoking chimney, and waterline.

Assembly notes:

I started with the hull, gluing and screwing two parts together at a time. Then I completed the hull.

After that, I installed the stern tube and the propeller shaft, placed the motors in the motor mounts, and then mounted the rudders. That's all there is to it.

AND NOW THE MOST IMPORTANT THING: THIS F124 FRIGATE (my favorite) IS A LIVING PROJECT.

Please, please, please: If you have any change requests, let me know! I'm happy to work out any modifications (the hull number decal, for example, will be added once I've finished painting).

But.

But.

But: I need your input if you want any changes!

The files are named as follows:

x2 means: print twice; x4 means print four times.

M means mirror, so for example, Rod Antenna_Front_M – two antennas are needed.Feedback gebenÜbersetzungsergebnisse verfügbar

Print Settings:It's quite simple ;)

Generally, for everything: Standard with support... tree support is recommended for some files.

Body! 100% infill