Ready to print SWTOR Sith Acolyte Lord Adraas Helmet 3D model.

You can see my models after printing here: https://www.instagram.com/sonndersmith/

Final mask consists of 2 parts assembling together by neodymium magnets (I recommend to use cylindrical magnets 8 mm in diameter and 3 mm in length). Both assembled parts have special sockets for magnets.

You need at least 220 x 210 x 200 mm build volume to print the mask. Contact me if your printer is smaller and I’ll split the files up according to your parameters.

Average wall thickness of each big part has an optimal value for resin casting: 4-5 mm.

I don’t mind if you’re going to sell masks made using my models, all I want from you is tagging me on Instagram in your relevant posts (@sonndersmith).

Listing contains:

• printable files in OBJ format;
• printable files in STL format;
• printable files in 3MF format

The mask model is scaled for an average 58 cm girth head, but the size could be changed if necessary.

Contact me if you have any questions.

UPD Aplil 14, 2023:

• Magnet sockets were added;
• Mesh errors were fixed;
• Helmet size was increased up to 58 cm girth head;
• The mistaken name is fixed.