Ready to print Black Mask Batman DC 3D Printable Model (digital file).

You can see my models after printing here: https://www.instagram.com/sonndersmith/

Final mask consists of 2 parts assembling together (front and back) by neodymium magnets (I recommend to use cylindrical magnets 8-10 mm in diameter and 4-6 mm in length). Both assembled parts have special conic recesses for drilling holes for magnets.

You need at least 220 x 210 x 200 mm build volume to print the mask. Contact me if your printer is smaller and I’ll split the files up according to your parameters.

Average wall thickness of each big part has an optimal value for resin casting: 4-5 mm.

I don’t mind if you’re going to sell masks made using my models, all I want from you is tagging me on Instagram in your relevant posts (@sonndersmith).

Listing contains:

• set of printable files in OBJ format;
• set of printable files of splitted helmet in OBJ format;
• set of printable files in STL format;

• low poly model of inner surface of the mask* in OBJ format.

• Before 3D printing you can check the mask size by making a low poly version of it out of paper using Pepakura. If the paper mask fits to your head well, you may print the file, if not, try to change its size at a certain percentage and when you find the proper value just use the same percentage for 3D printing. This approach will help you to save a lot of filament and time.

The mask model is scaled for an average 61 cm girth head, but the size could be changed if necessary.

Contact me if you have any questions.