This is a 3D printable injection mold designed for producing soft plastic lures inspired by the legendary Strike Pro Pig Shad 6" — a compact, tournament‑ready vibrotail from the iconic Pig Shad family. The mold features two identical cavities for efficient small‑batch production and is optimized for FDM printing (Bambu Lab, Prusa, Creality, etc.), while also being compatible with SLA/DLP resin printers.

Can be printed without supports or with minimal supports depending on orientation

For best results, print with a brim or raft to improve bed adhesion

Mold Features:

Two identical cavities for the 6" (152mm) Pig Shad profile

Optimized runner system distributing material evenly to both cavities

Venting channels along each cavity for air escape during injection

Alignment pins and matching holes for consistent mold closure

Designed for use with hand injectors and small injection machines

Compatible with plastisol, soft PVC, and other soft plastic materials

Thick, durable mold geometry designed for repeated use

Important note: This is an inspired/replica design based on the original Strike Pro Pig Shad 6" lure. Not an official Strike Pro product. For personal use and small‑batch production only.

Recommended FDM Printing Settings

To achieve maximum dimensional accuracy and durability, we recommend the following FDM printing settings:

For models 5 inches and larger, use 10 bottom layers, 10 top layers, and 8–12 wall lines.For models larger than 6 inches, increase the wall count to 12–15 wall lines for maximum rigidity and strength.Layer height: 0.08 mm. This provides the highest surface quality and excellent detail reproduction.Always dry the filament before printing and properly tune retraction settings to minimize stringing.PLA is not recommended, as it has poor heat resistance and may deform under elevated temperatures.PETG is the recommended material for most applications. Higher-performance engineering filaments can also be used if required.The higher the quality of the filament, the better the dimensional accuracy, surface finish, and overall print quality. For best results, we recommend using premium filaments from reputable manufacturers.All molds feature a standard 16 mm injector port diameter, which is compatible with approximately 99% of silicone bait injectors currently in use.

lures, bass, fishing, fishinglures, finesse, injection mold, softplasticlure, topwater, boating, spinningfishing, angling, sportfishing, pikesoftbait, luremaking, baitmold, softlure, softplasticbait, softbait mold, fishbase, injection