This is a 3D printable injection mold designed for producing soft plastic lures inspired by the NAYS Venom 75 — a compact, high-frequency paddle tail shad from the German brand Nays. The mold features three identical cavities for efficient small‑batch production and is optimized for FDM printing (Bambu Lab, Prusa, Creality, etc.), while also being compatible with SLA/DLP resin printers.

The NAYS Venom series is designed for perch, zander, and pike fishing, generating fast and strong tail vibrations while minimizing rolling action — making it particularly effective when fish need more action to be enticed to bite. The lure is infused with a shrimp aroma and is made from a plasticizer‑free compound for reduced environmental impact.

Injection Specifications:

Injector diameter: 16mm (compatible with standard hand injectors and small injection machines)

FDM Printing Recommendations:

Layer height: 0.08mm maximum for best surface quality and detail reproduction

Recommended material: PETG or any filament with a higher temperature resistance than PLA (ABS, ASA, Nylon, PET‑CF, PC, etc.)

For large models (over 5 inches / 125mm):

Wall loops (perimeters): 12–15 lines

Top solid layers: 10 layers

Bottom solid layers: 10 layers

Infill density: 10–20% (adjust as needed for strength vs. material usage)

Recommended orientation: cavity side up for best surface quality

Can be printed without supports or with minimal supports depending on orientation

For best results, print with a brim or raft to improve bed adhesion

Mold Features:

Three identical cavities for the 75mm Venom profile

High‑frequency vibrating paddle tail that creates fast, strong vibrations even on slow retrieves

Ribbed body design with pronounced lateral texture for enhanced water displacement

Devil Eyes detail for added lifelike appearance

Shrimp‑scented compound geometry integrated into the design

Optimized runner system distributing material evenly to all three cavities

Venting channels along each cavity for air escape during injection

Alignment pins and matching holes for consistent mold closure

Designed for use with hand injectors and small injection machines

Compatible with plastisol, soft PVC, and other soft plastic materials

Thick, durable mold geometry designed for repeated use

Important note: This is an inspired/replica design based on the original NAYS Venom lure. Not an official NAYS product. For personal use and small‑batch production only.