Fully 3D-printable bearing

Fully 3D-printable bearing 3D print model

Most up to date and parametric model can be found on my website (is also a bit cheaper): https://bbprojects.technology/collections/stl-fusion-360-source-files/products/fully-3d-printable-bearing-files

These files are the Fusion 360 source files of this project.

These bearings are espacially designed for 3D-printing. These bearings don't use regular balls like other bearings but it uses specially designed for 3D-printing balls. This insures the most supple 3D-printable bearings with the least amount of play. The bearing prints in only one piece, fully assembled. You may have to wreck the balls a little lose after it has printed because the tolerances are very small. For the best result you can lubricate it with some grease. Hope you like it and can use it in your project. (results can depend on printer settings and type of 3D printer used).

I added a new 3D model of the small bearing to the file section called homemade_printable_bearing_heavy_small_V3_easy_printable.stl . With this model there is more space between the inner ring, the balls and the outer ring. This model should print more easy then the previous model but there will be more play between the inner and outer ring. This model is made for people who have trouble printing the first version. I'm sorry for this but I made the first version so my printer could print it without any problems. I didn't anticipate for the use of other printers. Hope this new model will be printable on most other 3D-printers.

dimensions bearings: small bearing (V2 and V3): inner diameter = 12 mm outer diameter = 40 mm height = 12 mm

big bearing: inner diameter = 53 mm outer diameter = 81 mm height = 12 mm

Video can be found here: https://www.youtube.com/watch?v=N2V0BuoXlf4

jd94
jd94
awesome work!
Item rating
2 0
Recommended
I did not understand at first but bribro12 got me up to speed fast, Thank you
Recommended
I am building a rotator for a satellite antenna and needed a pair of large bearings to use on the upright to allow the antenna to change azimuth smoothly. I was able to resize this pattern to match my shaft without any difficulty.
Fully 3D-printable bearing
$5.99
 
Editorial License 
Fully 3D-printable bearing
$5.99
 
Editorial License 
Response 71% in 2.9h
3D Modeling
3D Print Modeling

3D Model formats

Format limitations
Native
  • Autodesk Fusion 360 (.f3d) (3 files)218 KB
Exchange
  • OBJ (.obj, .mtl) (3 files)2.92 MB
  • Autodesk Inventor (.iam, .ipt) (3 files)1.19 MB
  • 3D ACIS (.sat) (3 files)361 KB
  • Stereolithography (.stl) (6 files)17.2 MB
  • DXF (.dxf) (3 files)1.73 MB
  • Autodesk Fusion 360 (.f3d) (3 files)218 KB
  • IGES (.ige, .igs, .iges) (3 files)1.65 MB
  • Autodesk FBX (.fbx) (3 files)2.59 MB
  • Sketchup (.skp) (3 files)2.81 MB
  • AutoCAD (.dwg) (3 files)467 KB

3D Model details

  • Publish date2020-09-17
  • Model ID#2612630
Help