Ready to print Star Wars Sister Inquisitor Helmet 3D model (digital file).

You can see my models after printing here: https://www.instagram.com/sonndersmith/

You need at least 220x210x200mm build volume to print the mask. Contact me if your printer is smaller and I’ll split the files up according to your parameters.

Average wall thickness of each big part has an optimal value for resin casting: 4-5 mm.

I don’t mind if you’re going to sell masks made using my models, all I want from you is tagging me on Instagram in your relevant posts (@sonndersmith).

ZIP folder contains:

• the set of printable files in OBJ format;
• the set of printable files in STL format;
• low poly template for a visor (you can use Pepakura for unwrapping it);
• the set of split files in STL and OBJ format (220x210x200mm);

• low poly model of inner surface of the mask*.

• Before 3D printing you can check the mask size by making a low poly version of it out of paper using Pepakura. If the paper mask fits to your head well, you may print the file, if not, try to change its size at a certain percentage and when you find the proper value just use the same percentage for 3D printing. This approach will help you to save a lot of filament and time.

The mask model is scaled for an average 57 cm girth head, but the size could be changed if necessary.

Contact me if you have any questions.