This is a full 3D Printable working quadcopter frame that will support most electronics!

The quadcopter is 28.5" from Boom tip to Boom tip, and the main body is 1" thick and 7" wide, while the Booms are all .5" x 2". All of the Booms Lean inward at a ten Degree angle, this reduces prop wash (shaking while descending) and increases aerodynamics! I Also added another body that you can download, this is for all of the people that enjoy having the versatility of a frame that can convert from an X style directly into an DeadCat style frame! You Can download what you like the most! Just to let the people know who are not familiar with the DeadCat frame style, the front two booms are wider apart, while the back 2 booms remain at a 90 Degree angle. This makes better for filming because you do not get the booms in the picture! Most flight controllers also support this frame style as well! I just added Some Landing Gear for the copter that should be pretty strong, and will sit the copter 8" off the ground. This is perfect for carrying gimbals, or just for the person that doesn't want their quad sitting on the ground! There are two versions of landing gear that you can print, the larger landing gear is better for the people who are looking for an aerial photography platform, while the smaller landing gear is better for people who have sport style copters. The small landing gear sits the copter around 3.5 inches off of the ground. BTW I recommend that you print this out of ABS, but PLA will work. Please download, print, and fly! Thanks :) PS: If you have any questions you can contact me through my email- FlightFixit@gmail.com