Subaru Impreza 22B Hood Vent 3D print model

Subaru Impreza 22B Hood Vent

This can be installed on the GC8/GF8 V6 Hood without further modification.

Make your GC8 more unique with a hood vent from the more expensive 22B Impreza

If you have any questions or concerns regarding the product, compatibility, or usage, please don't hesitate to contact me

There are 3 files in total:

• Vent No Threaded Insert
• Vent Threaded Insert
• Mesh

Please do NOT reupload under any circumstancesPlease do NOT print and sell the physical product

In collaboration with VersaVibe (V//B) from Chile, thank you for providing me with the raw scan

Kind Regrads,Giao Pham

Print Setting:Size: 220x220x35mm

Material ABS, ASA, PC, PETG

Layer height: 0.1Walls count: 3Infill: 20%Print with support

If you print the version with threaded insert, please use the one with the following specification:

• 5x M5 - 7mm diameter - 10mm long
• 8x M4 - 6mm diameter - 4mm long

Notice, small holes to secure the mesh are very shallow, the maximum recommended screw length is 7mm.

If you have any problem, don't hesitate to get in touch with me