This model was designed to go into a 1/8 scale 992 Dakar model that I am currently busy developing.it is as close as I can get it to look like the real thing, however at best it only represents the dash and is not accurate.I printed it on a resin printer and not sure how FDM printing will handle the detail.I used standard settings:Layer Thickness: 0.05 mm (50 μm) is the industry standard for balanced detail and speed.Normal Exposure Time: 2.5s to 3.0s for monochrome screens; 6.0s to 8.0s for older RGB screens.Bottom (Burn-in) Exposure: 20s to 30s for the first 4 to 6 layers.Lift Distance: 6 mm to 8 mm. (Combined with a slow lift speed of 1–3 mm/s to smoothly peel the resin off the film).