ABS spare mounts for TrueCam H25 GPS 4K dash camera (or to be used on second car, making possible to share the camera between cars).

Material: ABS - note, the STL's are slightly enlarged to compensate for standard ABS material shrinking after cooling down. Do not print from other materials (especially PLA is wrong, due to extreme heat inside the car). For Prusa, the 3MF file is also included. For slicing, you will need to use a brim for some parts - see the picture.Print head cooling should be enabled from 3rd layer or so. Enclosed printer is recommended, or print it in a warm room, without air movement.

Link to TrueCam H25 GPS 4K: https://www.truecam.com/en/car-cameras/truecam-h25/