Peggy or Betty Uniform PinUp by SPARX 3D print model

Peggy or Bettie? . . .Carter or Page? . . . your choice with interchangeable heads.

Another shared commission, originally of Peggy Carter in a Blitz style uniform and The M1911, also known as the Colt 1911, or the Colt Government pistol, taken from pictures supplied by client. Added a Bettie Page head for public release. Staying with the style of underwear of the time period, various stages of undress are depicted in the 4 torso's supplied with this model all 15 rated nothing naughty!

A separate Add-Ons pack is available with a further 12 torso styles in further stages of undress and are all NSFW rated. This file contains a non adult model and is complete with all required parts and base. contact me for details of how to download

The legs, Torso and Arm are designed to be glued, the heads are interchangeable allowing the model to be converted to Peggy Carter or Bettie Page with either glue or use the magnets as in the pictures. You can mix the legs, arms and heads with the 12 torso variants in the Add-Ons pack.

The model is1/6 scale at H145, and 155mm height with base. The model will sit on any level surface without the base should you require.

4 torso’s options 4 Matching Arms , Jacket closed, Jacket Open, Shirt and bare arm for Nude torso’s 1 Right Leg 1 Left Leg 2 heads (and head pin) 1 base (FDM Only) 1 Head Stand

15 items in total.

PURCHASE OF THESE FILES DOES NOT ALLOW SELLING STL FILES OR MODELS MADE FROM THE FILES. . . DOWNLOAD IS FOR SINGLE BUYER USE ONLY

I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED

All parts are cut files to fit build plate of small resin printers like the Photon or have separate files than the FDM versions included. These orientations work for FDM printing but you may find a better orientation that reduces support. All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free.

Why cut into many smaller parts I have been asked?

1. If you try and assemble this, then paint it . .it would be difficult to paint into hidden areas, less masking when painting separate parts.
2. Smaller parts not only allow for Resin print at full scale, but also allow individual parts to use less supports than one larger part on FDM printers So now you know! Please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed. All of my models are only released when they can print! so please do not remix or fix faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoy.

3D PRINTING SETTINGS NONE OF THE FILES ARE ORIENTATED READY TO PRINT. This will allow you to “join” parts if you have larger printers and wish to do so . .

TIPS: Resin Printing; Hollow 2.40 Raft 100% Torso’s Legs Heads

Do not Hollow Raft 100% Left Arm’s

FDM ALL at 0.16 30% fill, speed 50

ALWAYS dry assemble and “trim” parts prior gluing. You can assemble the full model prior painting, however I suggest painting legs separate prior attaching.