Bombshell Pinups 05 Captain Marvel by SPARX 3D print model

Number 5 of a planned series of 40’s style pinup up art inspired by aeroplane nose art and DC’s Bombshell super heroines. There’s just not enough Varga, style pinup models around . . If cartoon figures are not to your style, an alternative interchangeable Human head is included . . If there was a Marvel and DC comics crossover in DC Bombshell characters, I envisage Captain Marvel to be somewhat like this . . inspiration from all the Ice cream parlours and the roller waitresses. .

3 heads one toon with Hat, one without and one human if toons aren’t your thing. . I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED All of the parts are orientated to print base ready to print with your favourite slicer . .
All parts are cut files to fit build plate of small resin printers like the Photon, examples in images SLA orientated for least support and strongest print orientation, as seen in the images. These orientations work for FDM printing but you may find a better orientation that reduces support. The legs and skates were trial printed as one part but so many supports to get off . .so split skates as you can see . . All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free. The model is 1/6 scale and is approx. 290mm tall/long on its full base. Why cut into many smaller parts I have been asked?

1. If you try and assemble this, then paint it . .it would be difficult to paint into hidden areas, less masking when painting separate parts.
2. Smaller parts not only allow for Resin print at full scale, but also allow individual parts to use less supports than one larger part on FDM printers So now you know! Please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed. All of my models are only released when they can print! so please do not remix or fix faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoy. I make these models for my own collection but I am always open to suggestions of content for models that cover the DC and Marvel universe as well as TV and film cult images e.g. Barbarella. so message me if you have any ideas . . As always enjoy the parts on offer. People ask me why the detail is so prominent (not just the Bimbo bits) but the muscle tone, anatomy, clothing etc. on my models . . well as they are primarily made/designed for my own collection I always sand down with fine emery then have models subjected to an Acetone vapor bath for 60 seconds when using FDM. This seals the shells and makes a smoother appearance but removes some detail . . hence build more detail into the model . . hope you like.

TIPS: Resin Printing; Do not hollow arms, skates, waist sash or chair parts. Wall 2.4, legs and head torso at 2.70mm All parts will fit into small SLA printer. All parts on FDM were print tested at 0.12 speed 50 ALWAYS dry assemble and “trim” parts prior gluing. Paint Body/torso before glue arms or skates into position. . . assemble stool, fit figure to stool . . . easier