Do you have some sort of sign just sitting around? This is an easy bracket for mounting road signs and other types of signs to the wall.
Print Instructions
- Material: PLA or PETG
- Supports: No
- Orientation: Place the piece on the flat side with no holes
Pieces
- 4 sign wall mount (model available for sign thicknesses of 3mm, 5mm, 7mm and 10mm) (included)
- 8 screws (in the files the shaft diameter of the required screw is 5 mm and the head diameter is 10 mm with a head thickness of 5 mm) (not included)
- 8 drywall anchors for the screws (not included)
Installation
Note: The best way to use these mounts is to put two mounts on the bottom of the sign and two on the top.
- Place your two bottom mounts on the wall where you would like them to be, then mark the holes with pencil.
- Screw drywall anchors into the wall where the pencil marks are.
- Screw the mounts into the drywall anchors.
- Place the sign into the two bottom mounts.
- Repeat this process with the mounts for the top of the sign.
If you enjoy this model, please leave a like and a comment. If you have any questions, concerns, or problems, please personally contact me.
