Tom Dixon Etch Shade inspired Lamp Free 3D print model

Tom Dixon's Etch Shade inspired Lamp. You'll need: 3x etch120cable x3.stl 1x etch120-puerta-A.stl 1x etch120-puerta-B.stl 20x etch120 x20.stl 1x etch120_sopcable2.stl

Requeriments

1 x M3 bolt to restrain the wire inside the "etch120_sopcable2.stl" Wire (5-6mm external diameter) 1 x light bulb base (maybe you need a plastic clamp to atach the wire inside the base) 96 x 2-2.5 mm width white plastic clamps to join the faces 1 x plastic clamp to make the pendant tie with the wire 1 x spotted omni directional bulb (no LED or white bulb, you need a point light or concentrated light to guet the best results). A good one is an halogen bulb http://www.cherylpettdesign.com/wp-content/uploads/2014/02/halogen.jpg