This table lamp features a cylinder shade with a tactile 3D cube pattern that creates a distinct optical illusion. The textured surface contrasts cleanly with a smooth, flared pedestal base that provides structural stability and a simple silhouette. It serves as a functional decor piece offering soft ambient lighting for a desk or nightstand, inspired by modern geometric style.

PRINTING & ASSEMBLY• Print-ready and tested.• Support-free design.• Fits standard E26/E27 sockets (hole diameter 41mm; can be used as a replacement shade for most home table or pendant lamps). • Assembles easily without glue or screws.

MODULAR SYSTEMMix and match filament colors or pair this model with other interchangeable bases and shades from my profile. Follow my page so you don't miss regular modular design updates.

DIMENSIONS• Shade: height: 180 mm (7 in), width: 178 mm (7 in)• Base: height: 85 mm (3.3 in), width: 150 mm (5.9 in)

PRINT TIMEDepends on printer and print settings. Forstandard settings on a Bambu Lab A1:• Shade: ~2h 40m• Base: ~3h

WEIGHTDepends on printing settings. Using the recommended settings: shade ~110 g, base ~110 g.

WHAT'S INCLUDEDFiles for Lamp Shade and Base:• STL — 3 files (Shade + Base part 1 + Base part 2), print-ready (tested and verified on Ender 3 S1)• OBJ — full lamp assembly (shade + base combined), for import into Blender, Cinema 4D, or any 3D software• 3MF — 3 files (Shade + Base part 1 + Base part 2), pre-configured print settings for Bambu Lab A1 (sliced in Bambu Studio — just open and print). PRINT SETTINGS (recommended): • Shade: VASE MODE (spiralize outercontour), layer height 0.2 mm,layer width 0.6 mm(I use nozzle 0.4 mmwith extrusion width 0.6 mm),top layers 0, bottom layers 6. • Base: standard mode, layer height 0.2 mm, layer width 0.4 mm, infill 15% (you canuse from 5% but the base will feel lighter and less solid), top layers 5,bottom layers 5, 2-3 outer walls (perimeters), fuzzy skin. (Warning! Do not apply fuzzy skin to the threaded parts of the base. You can also print the entire base without fuzzy skin). • No supports needed. • All STL, 3MF files are already orientedproperly (base should be printed upside-down).

Use LED bulb ONLY.A lamp cord with E26/E27 socket is required(not included) — available at most hardware or lighting stores (for example:
for the US https://amoz.onl/4yY, for Europe https://amoz.onl/4yW )

•• For personal use ONLY. Resale of files or printed objects is not permitted.••

Visit my profile & follow for more designs — new models added regularly!